这个定位很合适,而且比“把所有接触都做进一个大模块”更清晰。 **CCLite = Coupling & Contact Lite** 可以定位为: > 专门负责 **SPHLite 与 FEMLite 之间** 的耦合、接触、界面传递、损伤释放和 FSI 边界交互; > 不负责 SPHLite 内部粒子接触,也不负责 FEMLite 内部单元接触。 这样做的好处是边界清晰、职责单一、软件更容易工业化。 --- # 1. CCLite 的核心定位 建议把 CCLite 定义为一个 **跨求解器界面算法库**,而不是一个独立求解器。 它不直接求解 SPH 动量方程,也不直接组装 FEM 刚度矩阵,而是负责: ```text SPHLite boundary state + FEMLite boundary state ↓ CCLite interface algorithm ↓ SPH side coupling force / boundary condition + FEM side coupling force / boundary condition ``` 也就是说,CCLite 的核心输入输出是: ```text 输入: - SPH 粒子状态 - SPH 壳粒子状态 - FEM 实体表面状态 - FEM 壳表面状态 - 材料/厚度/法向/速度/压力等界面信息 输出: - 施加给 SPH 粒子的界面力、边界速度、ghost state - 施加给 FEM 节点/壳节点的界面力、面力、力矩 - 接触状态、穿透量、接触能量、耦合诊断信息 ``` 因此 CCLite 的边界应明确为: | 模块 | 是否由 CCLite 负责 | | --------------------- | ------------- | | SPH 内部粒子-粒子相互作用 | 不负责 | | SPH 内部壳粒子接触 | 不负责 | | FEM 内部实体接触 | 不负责 | | FEM 内部壳接触 | 不负责 | | SPH 粒子 ↔ FEM 实体面 | 负责 | | SPH 粒子 ↔ FEM 壳面 | 负责 | | SPH 壳粒子 ↔ FEM 实体面 | 负责 | | SPH 壳粒子 ↔ FEM 壳面 | 负责 | | SPH-FEM tied coupling | 负责 | | SPH-FEM FSI coupling | 负责 | | SPH-FEM 损伤释放后的接触转换 | 负责 | 这点非常重要。否则 CCLite 很容易膨胀成一个“通用接触库”,和 FEMLite/SPHLite 职责重叠。 --- # 2. 建议的软件边界 建议 CCLite 只处理下面 4 类对象之间的交互: ```text SPH solid particles ↔ FEM solid boundary faces SPH solid particles ↔ FEM shell faces SPH shell particles ↔ FEM solid boundary faces SPH shell particles ↔ FEM shell faces ``` 进一步扩展时,可以支持: ```text SPH boundary particles ↔ FEM surface SPH ghost particles ↔ FEM surface SPH damaged particles ↔ FEM surface SPH converted particles ↔ FEM erosion region ``` 但仍然保持原则: > 只处理 **SPH 域与 FEM 域之间** 的相互作用。 --- # 3. CCLite 不应该做什么 建议从架构设计文档中明确写出“不负责项”。 ## 3.1 不负责 SPH 内部算法 例如: ```text SPH particle-particle pressure force SPH artificial viscosity SPH tensile instability correction SPH shell particle internal force SPH shell self-contact SPH damage bond breaking inside SPH SPH neighbor summation SPH density update ``` 这些应该留在 SPHLite 中。 ## 3.2 不负责 FEM 内部算法 例如: ```text FEM element stiffness/internal force FEM shell membrane/bending/shear internal force FEM solid-solid contact FEM shell-shell self-contact FEM hourglass control FEM material constitutive update FEM element erosion FEM implicit contact iteration ``` 这些应该留在 FEMLite 中。 ## 3.3 不负责全局时间积分 CCLite 不应该自己推进时间步。它最多提供: ```text interface force interface impulse interface boundary condition interface stable time step suggestion ``` 时间推进仍由 SPHLite/FEMLite 或上层 Driver 管理。 --- # 4. CCLite 的推荐总体架构 建议采用下面的分层: ```text CCLite ├── Interface Data Layer │ ├── SPHInterfaceView │ ├── SPHShellInterfaceView │ ├── FEMSolidSurfaceView │ └── FEMShellSurfaceView │ ├── Geometry & Search Layer │ ├── ContactPrimitive │ ├── AABB │ ├── HashGrid │ ├── BVH │ └── PairCandidateBuilder │ ├── Detection Layer │ ├── ParticleFaceDetector │ ├── ParticleShellDetector │ ├── ShellParticleFaceDetector │ ├── PointEdgeDetector │ └── ThicknessAwareShellDetector │ ├── Coupling Law Layer │ ├── PenaltyContact │ ├── DampedPenaltyContact │ ├── CoulombFrictionContact │ ├── KinematicTie │ ├── PenaltyTie │ ├── GhostParticleBoundary │ ├── PressureProjectionFSI │ └── RiemannFSI │ ├── Transfer Layer │ ├── SPHToFEMForceTransfer │ ├── FEMToSPHBoundaryTransfer │ ├── ShellMomentTransfer │ └── EnergyMomentumMonitor │ └── Diagnostics Layer ├── ContactReport ├── CouplingReport ├── PenetrationReport ├── EnergyReport └── DebugVTKOutput ``` 简化成一句话: ```text CCLite = Interface View + Search + Detection + Coupling Law + Force Transfer + Diagnostics ``` --- # 5. CCLite 的核心数据抽象 ## 5.1 SPHInterfaceView CCLite 不应该直接依赖 SPHLite 内部数组结构,而应该通过 view 读取必要数据。 ```cpp struct CCL_SPHParticleView { int64_t id; double x[3]; double v[3]; double mass; double rho; double volume; double h; double radius; double pressure; double stress[6]; int material_id; int body_id; int active; }; ``` 对 CCLite 来说,SPH 实体粒子最重要的是: ```text 位置 x 速度 v 质量 m 体积 V 光滑长度 h 等效接触半径 r 压力 p 应力 sigma 材料/体编号 是否激活 ``` --- ## 5.2 SPHShellInterfaceView SPH 壳粒子需要更多几何信息: ```cpp struct CCL_SPHShellParticleView { int64_t id; double x[3]; double v[3]; double director[3]; double angular_velocity[3]; double thickness; double area; double mass; double normal[3]; double radius; double membrane_stress[3]; double bending_moment[3]; int material_id; int body_id; int active; }; ``` 壳粒子对 CCLite 的关键属性是: ```text 中面位置 速度 法向/director 厚度 面积 质量 角速度/转角信息 等效接触半径 ``` --- ## 5.3 FEMSolidSurfaceView FEMLite 不需要把整个实体单元暴露给 CCLite,只暴露边界面。 ```cpp struct CCL_FEMSurfaceFaceView { int64_t face_id; int64_t elem_id; int node_count; // 3 or 4 int64_t node_ids[4]; double x[4][3]; double v[4][3]; double normal[3]; double area; int material_id; int body_id; int active; }; ``` CCLite 只需要: ```text 边界面节点坐标 边界面节点速度 面法向 面积 所属单元/体 材料编号 是否激活 ``` --- ## 5.4 FEMShellSurfaceView FEM 壳面需要额外提供厚度和转角/director。 ```cpp struct CCL_FEMShellFaceView { int64_t shell_id; int node_count; // 3, 4, 6, 8 可逐步支持 int64_t node_ids[8]; double x[8][3]; double v[8][3]; double director[8][3]; double omega[8][3]; double thickness; double normal[3]; double area; int material_id; int body_id; int active; }; ``` 对壳接触而言,CCLite 必须知道: ```text 中面 厚度 法向 节点速度 节点转动信息 正反面 边界边 ``` --- # 6. CCLite 的输出数据 CCLite 不应该直接修改 SPHLite 和 FEMLite 的内部力数组,而是输出增量。 ## 6.1 SPH 侧输出 ```cpp struct CCL_SPHForceOutput { int64_t particle_id; double force[3]; double moment[3]; // shell particle 可用 double boundary_velocity[3]; double ghost_pressure; double ghost_density; int has_boundary_state; }; ``` ## 6.2 FEM 侧输出 ```cpp struct CCL_FEMForceOutput { int64_t node_id; double force[3]; double moment[3]; // shell node 可用 }; ``` 这样 SPHLite/FEMLite 可以自己决定: ```text 加入外力项 加入接触力项 加入 RHS 加入显式动量更新 加入隐式残差 ``` --- # 7. CCLite 应支持的主要算法类型 建议分为 5 大类。 --- ## 7.1 SPH-FEM penalty contact 这是第一优先级。 支持组合: ```text SPH solid particle ↔ FEM solid face SPH solid particle ↔ FEM shell face SPH shell particle ↔ FEM solid face SPH shell particle ↔ FEM shell face ``` 基本形式: [ \mathbf{f}_n = k_n \delta_n \mathbf{n} ] 阻尼: [ \mathbf{f}_d = -c_n v_n \mathbf{n} ] 摩擦: [ |\mathbf{f}_t| \le \mu |\mathbf{f}_n| ] 其中: ```text δ_n:穿透量 k_n:法向接触刚度 c_n:接触阻尼 μ:摩擦系数 ``` 这是 CCLite 最基础、最通用、最容易工业试点的功能。 --- ## 7.2 SPH-FEM tied coupling 用于同一连续体的不同离散区域连接。 例如: ```text FEM 远场结构 + SPH 局部破坏区 ``` 约束形式: [ \mathbf{x}_p = \sum_a N_a \mathbf{x}_a ] [ \mathbf{v}_p = \sum_a N_a \mathbf{v}_a ] 力反传: [ \mathbf{f}_a += N_a \mathbf{f}_p ] 适合: ```text SPH solid ↔ FEM solid tied interface SPH shell ↔ FEM shell tied interface SPH shell ↔ FEM solid tied interface ``` 建议 CCLite 支持两种 tie: ```text Penalty tie Kinematic interpolation tie ``` 第一阶段可以先做 penalty tie: [ \mathbf{f}*{tie} = k*{tie} \left( \sum_a N_a \mathbf{x}_a - \mathbf{x}_p \right) ] 后续再做严格运动学约束。 --- ## 7.3 Damage release: tie-to-contact 这是 CCLite 很重要的特色功能。 工程上经常需要: ```text 未损伤时:SPH-FEM tied coupling 损伤达到阈值后:释放 tie 释放后:变成普通接触或自由分离 ``` 可以设计成: ```text InterfaceBond ├── active tied ├── weakening ├── released └── contact-only ``` 典型状态转换: ```text damage < d0: tied coupling d0 ≤ damage < d1: degraded tie stiffness damage ≥ d1: release tie activate contact ``` 这对以下场景很重要: ```text FEM 壳破坏后与 SPH 区域分离 FEM-SPH 过渡区断裂 复合结构粘接失效 爆炸冲击下界面脱开 侵彻破坏 ``` --- ## 7.4 Ghost particle / boundary particle FSI 用于 SPH 流体与 FEM 结构耦合。 CCLite 可以根据 FEM 边界面生成或管理 boundary particles: ```text FEM shell/solid surface ↓ CCLite boundary particle sampling ↓ SPHLite neighbor interaction ``` 这些 boundary particles 由 CCLite 生成,但参与 SPH 邻域求和时由 SPHLite 使用。 边界粒子的状态来自 FEM: ```text x_b = shell / solid surface position v_b = shell / solid surface velocity n_b = surface normal ``` 适合: ```text SPH 水 ↔ FEM 壳 SPH 水 ↔ FEM 实体 SPH 爆轰产物 ↔ FEM 结构 SPH 空气/气体 ↔ FEM 结构 ``` 这是做水下爆炸、入水砰击、冲击波-FSI 的关键路线。 --- ## 7.5 Riemann FSI interface 后续高级版本建议支持。 用于可压缩 SPH / Godunov SPH / 水下爆炸。 输入: ```text SPH fluid state: ρ, v, p, c, EOS FEM boundary state: v_b, n ``` 求界面压力: [ p^* ] 然后: ```text p* 施加到 FEM 结构 v_b / ghost state 反馈给 SPH 流体 ``` 适合: ```text stiffened gas water JWL explosive gas ideal gas air compressible SPH underwater explosion water hammer slamming impact ``` 这一类可以作为 CCLite 的高端特色。 --- # 8. 接触检测算法建议 CCLite 只处理 SPH-FEM,所以接触检测组合可以明显收窄。 ## 8.1 必须支持的 narrow phase ```text Point ↔ Triangle Point ↔ Quad Point ↔ ShellFaceWithThickness Point ↔ Edge OrientedShellParticle ↔ ShellFace OrientedShellParticle ↔ SolidFace ``` 其中: ```text SPH solid particle = point/sphere SPH shell particle = oriented disk/patch FEM solid boundary = triangle/quad face FEM shell = triangle/quad midsurface + thickness ``` --- ## 8.2 壳厚度处理 对 FEM 壳接触,必须使用: [ r_c = r_{sph} + \frac{t_{shell}}{2} ] 对 SPH 壳粒子与 FEM 壳: [ r_c = \frac{t_{sph-shell}}{2} + \frac{t_{fem-shell}}{2} ] 不能只按中面距离判断。 建议 CCLite 内部使用: ```text ShellContactSurface ├── midsurface ├── top surface ├── bottom surface ├── edge surface └── thickness offset ``` 第一阶段可以不显式生成 top/bottom surface,但检测时必须考虑厚度。 --- ## 8.3 边缘接触 SPH 粒子撞 FEM 壳边缘时,仅用 point-face 会漏掉边界接触。 因此至少支持: ```text particle ↔ shell edge shell particle ↔ shell edge ``` 边缘距离: [ d = |\mathbf{x}*p - \mathbf{x}*{closest-edge}| ] 若: [ d < r_c ] 则发生边缘接触。 --- # 9. 宽相搜索建议 由于 CCLite 只处理 SPH-FEM,宽相搜索可以比较简洁。 ## 9.1 SPH 侧 使用 SPH 粒子的 hash grid / cell linked list。 ```text SPHLite 可提供已有邻域网格 或 CCLite 自己构建轻量 hash grid ``` 建议第一版 CCLite 自己构建一个独立 hash grid,避免强依赖 SPHLite 内部实现。 --- ## 9.2 FEM 侧 FEM 边界面使用 BVH / AABB tree。 ```text FEM solid boundary faces → BVH FEM shell faces → BVH FEM shell edges → BVH or edge AABB list ``` 推荐: ```text static FEM surface: build once moving FEM surface: refit BVH each time step large deformation/contact: rebuild or periodic rebuild ``` --- ## 9.3 混合查询 主流程: ```text for each active SPH particle: build particle AABB with contact radius query FEM surface BVH get candidate faces/edges run narrow phase compute contact/coupling force ``` 对于 SPH 壳粒子: ```text for each active SPH shell particle: build oriented/thickness AABB query FEM shell/solid BVH run shell-aware narrow phase ``` --- # 10. CCLite 的推荐功能矩阵 ## 10.1 第一层:接触 | 功能 | 第一版是否需要 | | --------------------------- | ------- | | SPH 实体粒子 ↔ FEM 实体面 | 必须 | | SPH 实体粒子 ↔ FEM 壳面 | 必须 | | SPH 壳粒子 ↔ FEM 壳面 | 必须 | | SPH 壳粒子 ↔ FEM 实体面 | 建议 | | 壳厚度接触 | 必须 | | 边缘接触 | 必须 | | Coulomb 摩擦 | 建议 | | 接触阻尼 | 必须 | | 自适应 penalty 刚度 | 建议 | | Lagrange multiplier contact | 后续 | | Augmented Lagrangian | 后续 | | Mortar contact | 后续 | --- ## 10.2 第二层:耦合 | 功能 | 第一版是否需要 | | --------------------------------- | ------- | | SPH solid ↔ FEM solid penalty tie | 建议 | | SPH solid ↔ FEM shell penalty tie | 建议 | | SPH shell ↔ FEM shell penalty tie | 建议 | | Kinematic tie | 后续 | | Damage release | 建议作为特色 | | Tie-to-contact 转换 | 强烈建议 | | Mortar tie | 后续 | | Nitsche tie | 后续 | --- ## 10.3 第三层:FSI | 功能 | 第一版是否需要 | | ------------------------------ | -------- | | FEM surface ghost particles | 建议 | | SPH pressure projection to FEM | 必须用于 FSI | | FEM velocity boundary to SPH | 必须用于 FSI | | Riemann FSI | 后续重点 | | 多介质 EOS interface | 后续 | | 水下爆炸专用 FSI | 后续重点 | --- # 11. 建议的版本开发路线 下面给一个比较适合 CCLite 的版本路线。 --- ## CCLite 0.1.x:最小可用接口层 目标:打通 SPHLite/FEMLite 数据通道。 ### 0.1.0:项目骨架 实现: ```text CCLite C API / C++ API SPHInterfaceView SPHShellInterfaceView FEMSolidSurfaceView FEMShellSurfaceView ForceOutputBuffer ContactReport ``` 验收标准: ```text 可以从 SPHLite 读取粒子状态 可以从 FEMLite 读取边界面状态 可以返回 SPH/FEM 接触力输出 ``` --- ### 0.1.1:FEM 边界面导入 实现: ```text FEM solid boundary face import FEM shell face import triangle/quad face primitive face normal/area calculation AABB generation ``` --- ### 0.1.2:SPH 粒子导入 实现: ```text SPH solid particle import SPH shell particle import particle AABB shell particle AABB contact radius estimation ``` --- ### 0.1.3:调试输出 实现: ```text candidate pair VTK contact point VTK penetration report interface pair report force report ``` 这一版非常重要,方便后续排查接触问题。 --- ## CCLite 0.2.x:基础 SPH-FEM penalty contact 目标:完成最基础、最实用的跨域接触。 ### 0.2.0:SPH 实体粒子 ↔ FEM 实体面 实现: ```text point-triangle contact point-quad contact normal penalty force damping force force transfer to FEM nodes equal-opposite force to SPH particle ``` --- ### 0.2.1:SPH 实体粒子 ↔ FEM 壳面 实现: ```text shell midsurface projection shell thickness-aware gap double-sided contact shell node force transfer ``` --- ### 0.2.2:边缘接触 实现: ```text particle-edge closest point shell edge contact solid face edge contact edge fallback when projection is outside face ``` --- ### 0.2.3:摩擦接触 实现: ```text relative tangential velocity penalty tangential force Coulomb limit frictional energy output ``` --- ### 0.2.4:自动 penalty 参数 实现: ```text user-defined stiffness material-based stiffness time-step-based stiffness auto penalty scaling ``` --- ## CCLite 0.3.x:壳粒子与 FEM 接触 目标:支持 SPH 壳粒子与 FEM 壳/实体交互。 ### 0.3.0:SPH 壳粒子 ↔ FEM 壳面 实现: ```text oriented shell particle model director-aware normal thickness-aware shell-shell gap normal penalty force moment transfer to shell particle/FEM shell ``` --- ### 0.3.1:SPH 壳粒子 ↔ FEM 实体面 实现: ```text shell particle to solid face projection orientation filter thickness distance contact force and moment ``` --- ### 0.3.2:壳正反面识别 实现: ```text front-side contact back-side contact double-sided shell contact normal smoothing side switching protection ``` --- ### 0.3.3:壳边缘增强 实现: ```text SPH shell particle ↔ FEM shell edge SPH shell particle ↔ FEM solid edge edge normal construction edge contact damping ``` --- ## CCLite 0.4.x:SPH-FEM tied coupling 目标:支持连续区域连接。 ### 0.4.0:SPH solid ↔ FEM solid penalty tie 实现: ```text SPH particle projection to FEM face/element shape function interpolation penalty displacement tie penalty velocity tie force back-transfer ``` --- ### 0.4.1:SPH solid ↔ FEM shell tie 实现: ```text particle to shell midsurface tie thickness offset support shell node force transfer ``` --- ### 0.4.2:SPH shell ↔ FEM shell tie 实现: ```text shell particle position tie director tie velocity tie angular velocity tie moment transfer ``` --- ### 0.4.3:tie-to-contact release 实现: ```text interface bond state damage input from SPHLite/FEMLite tie stiffness degradation bond release automatic contact activation after release ``` 这会成为 CCLite 的重要亮点。 --- ## CCLite 0.5.x:FSI 基础耦合 目标:支持水-结构、气体-结构、爆炸-结构耦合。 ### 0.5.0:FEM surface boundary particles 实现: ```text FEM 面采样 boundary particles 随 FEM 面运动更新 boundary particle normal/velocity/area 输出给 SPHLite ``` --- ### 0.5.1:SPH pressure projection to FEM 实现: ```text SPH pressure sampling near FEM surface kernel weighted pressure projection nodal force assembly pressure work output ``` --- ### 0.5.2:FEM velocity boundary to SPH 实现: ```text moving wall velocity no-penetration boundary slip / no-slip switch boundary velocity ghost state ``` --- ### 0.5.3:双向弱耦合 FSI 实现: ```text SPH → FEM pressure force FEM → SPH moving boundary subcycling support interface energy report ``` --- ## CCLite 0.6.x:冲击/爆炸高级 FSI 目标:面向水下爆炸、冲击波、可压缩 SPH。 ### 0.6.0:Riemann FSI interface 实现: ```text SPH fluid state extraction FEM boundary state extraction normal Riemann solver interface pressure p* interface velocity u* ``` --- ### 0.6.1:EOS support for interface 实现接口支持: ```text Ideal gas Stiffened gas JWL Tait Mie-Grüneisen ``` 注意:EOS 可以由 SPHLite 提供,CCLite 只需要调用 EOS interface。 --- ### 0.6.2:水下爆炸 FSI 场景 实现: ```text JWL explosive gas ↔ FEM shell stiffened gas water ↔ FEM shell multi-material SPH side state pressure impulse report ``` --- ### 0.6.3:FSI 稳定性增强 实现: ```text added-mass stabilization interface pressure filtering normal smoothing time subcycling support force relaxation ``` --- # 12. 和 SPHLite / FEMLite 的关系 建议采用“三层驱动关系”。 ```text 上层 Driver / CaeLite ├── 调用 SPHLite 更新 SPH 内力 ├── 调用 FEMLite 更新 FEM 内力 ├── 调用 CCLite 计算 SPH-FEM 界面力 ├── 汇总力 └── 时间推进 ``` 不要让 CCLite 主控整个求解流程。否则会破坏模块边界。 --- ## 12.1 显式动力学推荐流程 ```text for each time step: SPHLite: compute SPH internal forces FEMLite: compute FEM internal forces CCLite: collect SPH/FEM interface states search SPH-FEM candidate pairs detect contact/coupling compute interface forces output SPH/FEM force increments Driver: add forces to SPH and FEM update acceleration update velocity update displacement update damage update interface state ``` --- ## 12.2 隐式/显式混合流程 如果 FEMLite 是隐式,SPHLite 是显式,可以先支持弱耦合: ```text SPH 显式推进 FEM 隐式推进 CCLite 交换界面力和边界速度 采用 staggered coupling ``` 后续再做强耦合迭代: ```text while interface residual not converged: SPH predictor FEM solve CCLite interface correction ``` 但第一阶段不建议做复杂强耦合。 --- # 13. CCLite 的 API 设计建议 建议优先提供 C API,方便 SPHLite/FEMLite/CaeLite 调用。 ## 13.1 基本生命周期 ```c CCL_Context* ccl_create_context(void); void ccl_destroy_context(CCL_Context* ctx); void ccl_set_time_step(CCL_Context* ctx, double dt); void ccl_set_contact_parameters(CCL_Context* ctx, const CCL_ContactParams* params); void ccl_set_coupling_parameters(CCL_Context* ctx, const CCL_CouplingParams* params); ``` --- ## 13.2 输入接口 ```c void ccl_set_sph_particles( CCL_Context* ctx, const CCL_SPHParticle* particles, int count ); void ccl_set_sph_shell_particles( CCL_Context* ctx, const CCL_SPHShellParticle* particles, int count ); void ccl_set_fem_solid_faces( CCL_Context* ctx, const CCL_FEMFace* faces, int count ); void ccl_set_fem_shell_faces( CCL_Context* ctx, const CCL_FEMShellFace* faces, int count ); ``` --- ## 13.3 计算接口 ```c void ccl_build_search(CCL_Context* ctx); void ccl_compute_contact(CCL_Context* ctx); void ccl_compute_tie_coupling(CCL_Context* ctx); void ccl_compute_fsi_coupling(CCL_Context* ctx); void ccl_compute_all(CCL_Context* ctx); ``` --- ## 13.4 输出接口 ```c int ccl_get_sph_force_count(CCL_Context* ctx); void ccl_get_sph_forces(CCL_Context* ctx, CCL_SPHForce* out); int ccl_get_fem_force_count(CCL_Context* ctx); void ccl_get_fem_forces(CCL_Context* ctx, CCL_FEMForce* out); void ccl_get_contact_report(CCL_Context* ctx, CCL_ContactReport* report); void ccl_write_debug_vtk(CCL_Context* ctx, const char* filename); ``` --- # 14. CCLite 的配置文件建议 可以设计一个简单 JSON/YAML 配置。 ```yaml cclite: mode: explicit contact: enabled: true pair_types: - sph_solid_to_fem_shell - sph_solid_to_fem_solid - sph_shell_to_fem_shell normal_law: penalty friction_law: coulomb damping: true penalty: mode: auto_timestep scale: 0.2 friction: mu: 0.15 shell: thickness_aware: true double_sided: true edge_contact: true coupling: tie: enabled: true law: penalty_tie release_by_damage: true fsi: enabled: true method: pressure_projection boundary_particles: true ``` --- # 15. 验证算例建议 CCLite 必须有独立验证算例,不能只靠完整 CaeLite 工程例子。 ## 15.1 接触验证 ```text 1. 单个 SPH 粒子撞刚性 FEM 平面 2. SPH 粒子云压缩 FEM 实体表面 3. SPH 粒子撞 FEM 壳板 4. SPH 壳粒子撞 FEM 壳板 5. 粒子撞壳边缘 6. 带摩擦斜面滑移 ``` 验收指标: ```text 穿透量 反弹速度 动量守恒 接触能量 摩擦耗散 接触力峰值 ``` --- ## 15.2 tied coupling 验证 ```text 1. FEM 杆 + SPH 杆拉伸 2. FEM 板 + SPH 局部区域弯曲 3. FEM 壳 + SPH 壳过渡拉伸 4. tie 释放后自由分离 5. tie 释放后再次接触 ``` 验收指标: ```text 界面位移连续性 界面力平衡 应力波透射/反射 能量误差 释放状态正确性 ``` --- ## 15.3 FSI 验证 ```text 1. SPH 水柱冲击 FEM 刚性壁 2. SPH 水柱冲击 FEM 弹性板 3. 水下冲击波作用 FEM 壳 4. 气泡/高压区作用薄板 5. 入水砰击简化模型 ``` 验收指标: ```text 压力峰值 冲量 板中心位移 能量交换 界面无明显穿透 压力振荡水平 ``` --- # 16. CCLite 的工业级关键点 要想后续做成可靠模块,建议从一开始就加入这些诊断能力。 ## 16.1 接触诊断 ```text 最大穿透量 平均穿透量 接触对数量 接触力最大值 接触力总和 接触能量 摩擦耗散 接触失效/释放数量 ``` --- ## 16.2 动量和能量检查 每个时间步输出: ```text SPH side total contact force FEM side total contact force force balance residual contact work interface energy transfer ``` 要求: ```text SPH 接触力总和 + FEM 接触力总和 ≈ 0 ``` 如果不满足,说明力反传或形函数分配有问题。 --- ## 16.3 可视化调试 建议输出: ```text contact_pairs.vtp contact_normals.vtp penetration_points.vtp interface_forces.vtp tie_bonds.vtp released_bonds.vtp boundary_particles.vtp ``` 这对调接触算法非常关键。 --- # 17. CCLite 的最佳初期定位 不要一开始就追求: ```text 通用 mortar 强耦合隐式接触 任意壳-壳自接触 复杂多体接触 ``` 这些会拖慢进度。 最好的初期定位是: > **一个显式动力学友好的 SPH-FEM 跨域接触与耦合库。** 第一阶段核心卖点: ```text SPH 粒子 ↔ FEM 面接触 SPH 粒子 ↔ FEM 壳接触 SPH 壳粒子 ↔ FEM 壳接触 SPH-FEM penalty tie tie-to-contact release SPH-FEM FSI pressure transfer ``` 这已经能支撑很多工程场景: ```text 水下爆炸作用壳体 水冲击薄板 粒子/碎片撞击结构 局部 SPH 破坏区与 FEM 结构耦合 FEM 壳结构与 SPH 壳破坏区耦合 ``` --- # 18. 推荐的 CCLite 技术路线图 可以概括成下面这条路线: ```text CCLite 0.1 接口和数据视图 ↓ CCLite 0.2 SPH solid particle ↔ FEM solid/shell penalty contact ↓ CCLite 0.3 SPH shell particle ↔ FEM solid/shell thickness-aware contact ↓ CCLite 0.4 SPH-FEM tied coupling + damage release + tie-to-contact ↓ CCLite 0.5 SPH-FEM FSI: pressure projection + ghost particles ↓ CCLite 0.6 Riemann FSI + underwater explosion interface ↓ CCLite 0.7+ mortar/Nitsche/augmented Lagrangian/high-order shell coupling ``` --- # 19. 最建议的模块名称 既然叫 CCLite,可以把内部模块命名为: ```text ccl_core ccl_interface ccl_geometry ccl_search ccl_contact ccl_coupling ccl_fsi ccl_transfer ccl_diagnostics ``` 算法对象命名: ```text CCLContactPair CCLContactLaw CCLCouplingPair CCLCouplingLaw CCLInterfaceBond CCLBoundaryParticle CCLForceTransfer CCLShellContact CCLFSIInterface ``` --- # 20. 总结建议 CCLite 的方向非常合适。建议把它定义为: > **SPHLite 与 FEMLite 之间的跨域耦合与接触算法库。** 它应该负责: ```text SPH solid ↔ FEM solid/shell contact SPH shell ↔ FEM solid/shell contact SPH-FEM tied coupling damage release / tie-to-contact SPH-FEM FSI pressure/velocity transfer ghost/boundary particles Riemann FSI interface diagnostics ``` 它不应该负责: ```text SPH 内部粒子作用 SPH 内部壳粒子接触 FEM 内部实体/壳接触 FEM 单元内力 SPH 粒子内力 全局时间积分 材料本构 ``` 最稳妥的开发策略是: ```text 先做 penalty contact 再做 shell thickness-aware contact 再做 SPH-FEM tied coupling 再做 tie-to-contact damage release 再做 FSI pressure projection 最后做 Riemann FSI / mortar / Nitsche / augmented Lagrangian ``` 这样 CCLite 的边界清楚、算法层次清楚,也能自然服务于你已有的 **SPHLite** 和 **FEMLite**。