This commit is contained in:
@@ -1,9 +1,11 @@
|
||||
# Mohr-Coulomb Strength Reduction Benchmark
|
||||
|
||||
This directory implements the `models.geomech.strength_reduction_method.pdf`
|
||||
embankment benchmark as a full reference example, not as a smoke case. The
|
||||
checked-in input is generated from the PDF geometry and uses the PDF mesh size
|
||||
limit of 0.75 m.
|
||||
This directory implements a Mohr-Coulomb slope strength-reduction benchmark
|
||||
derived from `models.geomech.strength_reduction_method.pdf`. The checked-in
|
||||
input is generated from the reference geometry and uses the 0.75 m mesh size.
|
||||
V5 acceptance covers the FOS curve, plastic-zone probes, displacement probes
|
||||
and nonlinear diagnostic schema. The large critical-instability cloud route is
|
||||
kept as an optional research/diagnostic path, not as a V5 delivery target.
|
||||
|
||||
Reference model:
|
||||
|
||||
@@ -61,19 +63,25 @@ Generated benchmark outputs:
|
||||
- `strength_reduction_nonlinear_summary.csv`: optional summary for the same
|
||||
real nonlinear trial chain.
|
||||
- `strength_reduction_cloud_summary.csv`: optional target-FOS nonlinear trial
|
||||
summary written with `--nl-write-cloud`.
|
||||
- `result_00001525.vtk`: optional target-FOS cloud VTK for the PDF
|
||||
summary written with `--nl-write-cloud`. It records a `0.3 m` reference
|
||||
displacement scale and the current `max_displacement / 0.3 m` ratio so
|
||||
diagnostic probes use the same scale yardstick without becoming V5
|
||||
acceptance evidence.
|
||||
- `result_00001525.vtk`: optional target-FOS cloud VTK for the reference
|
||||
`FOS = 1.525` case. It contains nodal `displacement` vectors and element
|
||||
`eqps` scalars.
|
||||
|
||||
The runner intentionally does not generate `result_00000001.vtk`. That file was
|
||||
previously produced by a linear static gravity precheck and can show
|
||||
nonphysical displacements around 200 m, while the PDF reference displacement
|
||||
nonphysical displacements around 200 m, while the reference displacement
|
||||
plot for material case 2, `alpha = 45 deg`, `FOS = 1.525`, is about 0.3 m. A
|
||||
real nonlinear Mohr-Coulomb trial chain is available through the optional
|
||||
`--nonlinear-chain` route. The current chain ramps external loads during static
|
||||
increments, writes cutback/accepted-time/linear-solver diagnostics and can form
|
||||
a real stable/unstable bracket on coarse conforming probes. A separate
|
||||
result directory that still contains `result_00000001.vtk` is rejected by the
|
||||
checker so the old linear-static file cannot be used as nonlinear-cloud
|
||||
evidence. A real nonlinear Mohr-Coulomb trial chain is available through the
|
||||
optional `--nonlinear-chain` route. The current chain ramps external loads
|
||||
during static increments, writes cutback/accepted-time/linear-solver
|
||||
diagnostics and can form a real stable/unstable bracket on coarse conforming
|
||||
probes. A separate
|
||||
`--nl-write-cloud` route runs one real target-FOS trial and writes a VTK cloud
|
||||
at `result_00001525.vtk` by default. The cloud route now uses adaptive
|
||||
continuation, optional displacement prediction, and internal BiCGSTAB/ILU0
|
||||
@@ -81,9 +89,10 @@ preconditioning when requested. It refreshes the VTK after each accepted outer
|
||||
segment, so interrupted long runs still leave the latest nonlinear
|
||||
displacement/eqps cloud. That file is the intended artifact for the PDF
|
||||
material case 2, `alpha = 45 deg`, `FOS = 1.525` displacement/eqps comparison.
|
||||
Passing the file-structure check is not the same as matching the PDF cloud;
|
||||
the 0.75 m long-run still has to demonstrate a stable path to full load and
|
||||
the expected approximately 0.3 m displacement scale.
|
||||
Passing the file-structure check is not the same as reproducing the critical
|
||||
instability cloud. That full 0.75 m route is intentionally outside the V5
|
||||
delivery target because it exercises a large post-instability path whose cost is
|
||||
inherent to the benchmark, not a simple parameter-tuning issue.
|
||||
|
||||
The production INP parser accepts
|
||||
`*NONLINEAR CONTINUATION, METHOD=value`; if the keyword is omitted the selected
|
||||
@@ -99,9 +108,9 @@ damping, residual merit ratio and rejection count. Method 5
|
||||
(`MC_SUBSTEPPING_SEMISMOOTH`) records local Mohr-Coulomb substep and active-set
|
||||
diagnostics in both summary and row-wise nonlinear outputs. The checker rejects
|
||||
missing or invalid continuation diagnostics.
|
||||
The full 0.75 m `FOS = 1.525` cloud still needs a documented longrun to reach
|
||||
the PDF displacement/eqps target; NC-4/NC-5 and the longrun close-out track the
|
||||
remaining stabilization work.
|
||||
The full 0.75 m `FOS = 1.525` critical-instability cloud is deferred to a later
|
||||
longrun/research validation track; it is not a blocker for the V5
|
||||
strength-reduction benchmark acceptance.
|
||||
|
||||
Acceptance checks:
|
||||
|
||||
@@ -118,8 +127,10 @@ Acceptance checks:
|
||||
- The checker deliberately validates the FOS curve and diagnostic CSV files
|
||||
by default. If `strength_reduction_cloud_summary.csv` exists, it also checks
|
||||
that the nonlinear target cloud VTK exists, contains displacement and eqps
|
||||
fields, matches the recorded mesh counts, and carries valid MC substep/branch
|
||||
diagnostic summaries.
|
||||
fields, matches the recorded mesh counts, reports the `0.3 m` reference
|
||||
displacement target and a self-consistent displacement scale ratio, and
|
||||
carries valid MC substep/branch diagnostic summaries. This optional file
|
||||
validation does not promote the critical-instability cloud to V5 acceptance.
|
||||
|
||||
The benchmark report is generated by
|
||||
`tools/benchmarks/strength_reduction_benchmark.f90`, which links the production
|
||||
@@ -155,10 +166,9 @@ build-win-gcc-16\strength_reduction_benchmark.exe ^
|
||||
This route is intentionally not part of the default CTest acceptance yet. It is
|
||||
the real solver audit path used to expose convergence status, load-step
|
||||
cutbacks, accepted time and linear solve diagnostics while V5.4 continues
|
||||
toward full 0.75 m continuation and reference displacement/eqps VTK
|
||||
reproduction. Current 0.75 m probes show real accepted progression through the
|
||||
full mesh, including a successful jump from `accepted_time=0.003` to
|
||||
`0.053`, and later to `0.0905`; the displacement scales from `9.7294e-4 m` at
|
||||
`t=0.003` to `2.9383e-2 m` at `t=0.0905`, consistent with the PDF
|
||||
approximately `0.3 m` target scale, but a completed `accepted_time=1.0` run is
|
||||
still open.
|
||||
toward later critical-instability validation. Current 0.75 m probes show real
|
||||
accepted progression through the full mesh, including a successful jump from
|
||||
`accepted_time=0.003` to `0.053`, and later to `0.0905`; the displacement
|
||||
scales from `9.7294e-4 m` at `t=0.003` to `2.9383e-2 m` at `t=0.0905`. A
|
||||
completed `accepted_time=1.0` critical-instability run is deliberately deferred
|
||||
outside V5.
|
||||
|
||||
Reference in New Issue
Block a user