Complete V5 acceptance milestone
This commit is contained in:
@@ -1,19 +1,50 @@
|
||||
# Roll Forming Friction Smoke Case
|
||||
# Roll Forming Benchmarks
|
||||
|
||||
This folder contains the original roll-forming reference documents plus a
|
||||
compact FemLite V4.8 smoke case:
|
||||
This folder contains the original roll-forming reference documents plus two
|
||||
compact FemLite V5 entries:
|
||||
|
||||
- `roll_forming_friction_smoke.inp`
|
||||
- `run_case.bat`
|
||||
- `roll_forming_kinematics_benchmark.inp`
|
||||
- `roll_forming_springback_benchmark.inp`
|
||||
|
||||
The reference model describes a quarter-symmetry cold roll-forming process with
|
||||
rigid rollers, friction coefficient 0.30, roller down-feed, roller rotation,
|
||||
workpiece plasticity and residual-stress output. FemLite V4.8 does not claim
|
||||
that complete high-fidelity process simulation. The included input keeps the
|
||||
executable mechanics that the current solver can verify reliably: a C3D8
|
||||
workpiece compressed against a C3D8 roller surrogate, scaled elastic material
|
||||
properties for a stable short explicit run, Coulomb friction, a tangential
|
||||
forming load and contact/friction output.
|
||||
`roll_forming_friction_smoke.inp` is the V4.8 executable mechanics smoke: a
|
||||
C3D8 workpiece compressed against a C3D8 roller surrogate with scaled elastic
|
||||
material properties, Coulomb friction, tangential forming load and contact
|
||||
output.
|
||||
|
||||
`roll_forming_kinematics_benchmark.inp` is the V5.6 roller kinematics benchmark.
|
||||
It drives the production rigid-cylinder/roller modules with translation,
|
||||
down-feed and angular velocity, then compares tangential slip, regularized
|
||||
traction, friction energy, pressure and torque with and without roller spin.
|
||||
|
||||
`roll_forming_springback_benchmark.inp` is the V5.6 plastic forming and
|
||||
springback benchmark. It drives the production roller kinematics, regularized
|
||||
traction, roll metrics and J2 small-strain material update on a compact
|
||||
through-thickness strip model. The benchmark forms the workpiece to a prescribed
|
||||
curvature, unloads by solving for zero resultant bending moment, and writes
|
||||
residual displacement, springback ratio and plastic-zone output.
|
||||
|
||||
Reference checks for the current kinematics input:
|
||||
|
||||
| Metric | Requirement |
|
||||
|---|---:|
|
||||
| Active samples | 6 |
|
||||
| Mean slip with spin | greater than 1.5 x no-spin slip |
|
||||
| Mean regularized traction with spin | greater than 1.1 x no-spin traction |
|
||||
| Max traction delta | greater than 50 |
|
||||
| Friction energy with spin | greater than no-spin energy |
|
||||
| Roller torque with spin | positive |
|
||||
|
||||
Reference checks for the current springback input:
|
||||
|
||||
| Metric | Requirement |
|
||||
|---|---:|
|
||||
| Material points | 81 |
|
||||
| Forming force | between `1.0e4` and `3.0e4` |
|
||||
| Plastic work | positive |
|
||||
| Plastic zone fraction | between `0.20` and `1.0` |
|
||||
| Springback ratio | between `0.05` and `0.95` |
|
||||
| Residual moment | below `1.0e-6` of peak moment scale |
|
||||
|
||||
Run:
|
||||
|
||||
@@ -21,4 +52,14 @@ Run:
|
||||
run_case.bat
|
||||
```
|
||||
|
||||
Results are written to `results\auto_run`.
|
||||
Results are written to:
|
||||
|
||||
- `results\auto_run` for the friction smoke
|
||||
- `results\roller_kinematics` for the kinematics benchmark
|
||||
- `results\springback` for the plastic springback benchmark
|
||||
|
||||
Springback reference outputs include `springback_history.csv`,
|
||||
`springback_summary.csv` and `plastic_zone.csv`. Current reference values are
|
||||
springback ratio `0.473154068`, residual displacement `0.0316107559`, plastic
|
||||
work `1.11591736e-05`, active plastic points `56/81` and residual moment
|
||||
`8.92778801e-11` in absolute value.
|
||||
|
||||
@@ -0,0 +1,84 @@
|
||||
from __future__ import annotations
|
||||
|
||||
import csv
|
||||
import subprocess
|
||||
import sys
|
||||
from pathlib import Path
|
||||
|
||||
|
||||
def read_key_values(path: Path) -> dict[str, float]:
|
||||
result: dict[str, float] = {}
|
||||
with path.open(newline="") as handle:
|
||||
reader = csv.reader(handle)
|
||||
next(reader)
|
||||
for key, value in reader:
|
||||
result[key] = float(value)
|
||||
return result
|
||||
|
||||
|
||||
def require(condition: bool, message: str) -> None:
|
||||
if not condition:
|
||||
raise AssertionError(message)
|
||||
|
||||
|
||||
def main() -> int:
|
||||
if len(sys.argv) != 3:
|
||||
raise SystemExit("usage: check_roller_kinematics.py BUILD_DIR OUTPUT_DIR")
|
||||
|
||||
repo = Path(__file__).resolve().parents[2]
|
||||
build_dir = Path(sys.argv[1]).resolve()
|
||||
out_dir = Path(sys.argv[2]).resolve()
|
||||
out_dir.mkdir(parents=True, exist_ok=True)
|
||||
|
||||
inp = Path(__file__).resolve().parent / "roll_forming_kinematics_benchmark.inp"
|
||||
text = inp.read_text(encoding="utf-8")
|
||||
require("*ROLLER KINEMATICS" in text, "missing roller kinematics block")
|
||||
|
||||
tool = build_dir / "roll_forming_kinematics_benchmark.exe"
|
||||
if not tool.exists():
|
||||
tool = build_dir / "roll_forming_kinematics_benchmark"
|
||||
completed = subprocess.run(
|
||||
[str(tool), str(inp), str(out_dir)],
|
||||
cwd=repo,
|
||||
text=True,
|
||||
stdout=subprocess.PIPE,
|
||||
stderr=subprocess.STDOUT,
|
||||
)
|
||||
if completed.returncode != 0:
|
||||
print(completed.stdout)
|
||||
raise RuntimeError(f"{tool} exited with code {completed.returncode}")
|
||||
|
||||
summary = out_dir / "roller_kinematics_summary.csv"
|
||||
history = out_dir / "roller_kinematics_history.csv"
|
||||
require(summary.exists(), "summary output missing")
|
||||
require(history.exists(), "history output missing")
|
||||
require(summary.stat().st_size > 0, "summary output empty")
|
||||
require(history.stat().st_size > 0, "history output empty")
|
||||
|
||||
data = read_key_values(summary)
|
||||
require(int(data["samples"]) == 6, "unexpected sample count")
|
||||
require(int(data["active_count"]) == 6, "all roller samples should be active")
|
||||
require(data["mean_slip_with_spin"] > data["mean_slip_without_spin"] * 1.5,
|
||||
"spin should increase tangential slip")
|
||||
require(data["mean_traction_with_spin"] > data["mean_traction_without_spin"] * 1.1,
|
||||
"spin should change regularized tangential traction")
|
||||
require(data["max_delta_traction"] > 50.0, "traction delta is too small")
|
||||
require(data["friction_energy_with_spin"] > data["friction_energy_without_spin"],
|
||||
"spin should increase friction energy")
|
||||
require(data["roller_torque_with_spin"] > 0.0, "roller torque should be positive")
|
||||
require(data["mean_pressure"] > 1.0e5, "mean pressure should be nonzero")
|
||||
|
||||
with history.open(newline="") as handle:
|
||||
rows = list(csv.DictReader(handle))
|
||||
require(len(rows) == 6, "history should have one row per sample")
|
||||
for row in rows:
|
||||
require(float(row["traction_with_spin"]) > float(row["traction_without_spin"]),
|
||||
"each sample should show spin-dependent traction")
|
||||
require(float(row["friction_energy_with_spin"]) >= 0.0,
|
||||
"friction energy must be nonnegative")
|
||||
|
||||
return 0
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
raise SystemExit(main())
|
||||
@@ -0,0 +1,103 @@
|
||||
from __future__ import annotations
|
||||
|
||||
import csv
|
||||
import subprocess
|
||||
import sys
|
||||
from pathlib import Path
|
||||
|
||||
|
||||
def read_key_values(path: Path) -> dict[str, float]:
|
||||
result: dict[str, float] = {}
|
||||
with path.open(newline="") as handle:
|
||||
reader = csv.reader(handle)
|
||||
next(reader)
|
||||
for key, value in reader:
|
||||
result[key] = float(value)
|
||||
return result
|
||||
|
||||
|
||||
def require(condition: bool, message: str) -> None:
|
||||
if not condition:
|
||||
raise AssertionError(message)
|
||||
|
||||
|
||||
def main() -> int:
|
||||
if len(sys.argv) != 3:
|
||||
raise SystemExit("usage: check_springback_results.py BUILD_DIR OUTPUT_DIR")
|
||||
|
||||
repo = Path(__file__).resolve().parents[2]
|
||||
build_dir = Path(sys.argv[1]).resolve()
|
||||
out_dir = Path(sys.argv[2]).resolve()
|
||||
out_dir.mkdir(parents=True, exist_ok=True)
|
||||
|
||||
case_dir = Path(__file__).resolve().parent
|
||||
inp = case_dir / "roll_forming_springback_benchmark.inp"
|
||||
text = inp.read_text(encoding="utf-8")
|
||||
require("*ROLL FORMING SPRINGBACK" in text, "missing springback block")
|
||||
|
||||
tool = build_dir / "roll_forming_springback_benchmark.exe"
|
||||
if not tool.exists():
|
||||
tool = build_dir / "roll_forming_springback_benchmark"
|
||||
completed = subprocess.run(
|
||||
[str(tool), str(inp), str(out_dir)],
|
||||
cwd=repo,
|
||||
text=True,
|
||||
stdout=subprocess.PIPE,
|
||||
stderr=subprocess.STDOUT,
|
||||
)
|
||||
if completed.returncode != 0:
|
||||
print(completed.stdout)
|
||||
raise RuntimeError(f"{tool} exited with code {completed.returncode}")
|
||||
|
||||
summary = out_dir / "springback_summary.csv"
|
||||
history = out_dir / "springback_history.csv"
|
||||
zone = out_dir / "plastic_zone.csv"
|
||||
require(summary.exists(), "summary output missing")
|
||||
require(history.exists(), "history output missing")
|
||||
require(zone.exists(), "plastic zone output missing")
|
||||
require(summary.stat().st_size > 0, "summary output empty")
|
||||
require(history.stat().st_size > 0, "history output empty")
|
||||
require(zone.stat().st_size > 0, "plastic zone output empty")
|
||||
|
||||
data = read_key_values(summary)
|
||||
require(int(data["samples"]) == 8, "unexpected sample count")
|
||||
require(int(data["total_points"]) == 81, "unexpected material point count")
|
||||
require(data["forming_force"] > 1.0e4, "forming force too small")
|
||||
require(data["forming_force"] < 3.0e4, "forming force too large")
|
||||
require(data["plastic_work"] > 0.0, "plastic work must be positive")
|
||||
require(data["friction_energy"] > 0.0, "friction energy must be positive")
|
||||
require(data["active_plastic_points"] > 0, "plastic zone did not activate")
|
||||
require(0.20 <= data["plastic_zone_fraction"] <= 1.0,
|
||||
"plastic zone fraction outside expected range")
|
||||
require(data["max_eqps"] > 1.0e-4, "equivalent plastic strain too small")
|
||||
require(data["release_curvature"] > 0.0, "release curvature must be positive")
|
||||
require(data["residual_curvature"] > 0.0, "residual curvature must be positive")
|
||||
require(data["formed_displacement"] > data["residual_displacement"],
|
||||
"springback should reduce displacement")
|
||||
require(data["residual_displacement"] > 0.0,
|
||||
"residual displacement should remain positive")
|
||||
require(0.05 < data["springback_ratio"] < 0.95,
|
||||
"springback ratio outside expected range")
|
||||
require(abs(data["residual_moment"]) <= max(1.0, data["peak_moment"]) * 1.0e-6,
|
||||
"unloaded residual moment is too large")
|
||||
|
||||
with history.open(newline="") as handle:
|
||||
rows = list(csv.DictReader(handle))
|
||||
require(len(rows) == 8, "history should have one row per forming sample")
|
||||
require(float(rows[-1]["plastic_work"]) >= data["plastic_work"] * 0.99,
|
||||
"history plastic work did not reach summary value")
|
||||
|
||||
with zone.open(newline="") as handle:
|
||||
points = list(csv.DictReader(handle))
|
||||
require(len(points) == 81, "plastic zone should cover all material points")
|
||||
active = [row for row in points if int(row["active"]) == 1]
|
||||
require(len(active) == int(data["active_plastic_points"]),
|
||||
"active plastic point count mismatch")
|
||||
require(max(float(row["eqps"]) for row in active) >= data["max_eqps"] * 0.99,
|
||||
"plastic zone max eqps mismatch")
|
||||
|
||||
return 0
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
raise SystemExit(main())
|
||||
@@ -0,0 +1,6 @@
|
||||
*HEADING
|
||||
FemLite roller kinematics benchmark for V5.6 roll forming
|
||||
**
|
||||
** radius, normal_force, mu, feed_rate, down_rate, angular_speed, reference_speed, duration, samples
|
||||
*ROLLER KINEMATICS
|
||||
0.050, 1000.0, 0.30, 0.20, -0.01, 4.0, 0.20, 1.0, 6
|
||||
@@ -0,0 +1,7 @@
|
||||
** FemLite V5.6 roll forming plastic springback benchmark.
|
||||
** thickness, half_width, strips, layers, length, radius,
|
||||
** feed_total, down_total, angular_speed, normal_force, mu,
|
||||
** reference_speed, duration, E, nu, yield, hardening,
|
||||
** target_curvature, samples
|
||||
*ROLL FORMING SPRINGBACK
|
||||
0.004, 0.030, 9, 9, 0.20, 0.05, 0.20, -0.002, 4.0, 20000.0, 0.30, 0.20, 1.0, 210000.0, 0.30, 250.0, 10000.0, 3.0, 8
|
||||
@@ -1,3 +1,40 @@
|
||||
@echo off
|
||||
call "%~dp0..\run_example_case.bat" "%~dp0" "roll_forming" "--run" "roll_forming_friction_smoke.inp" "10"
|
||||
rem FemLite roll forming smoke, roller kinematics and springback benchmark runner.
|
||||
setlocal
|
||||
set "CASE_DIR=%~dp0"
|
||||
for %%I in ("%CASE_DIR%..\..") do set "ROOT_DIR=%%~fI"
|
||||
set "BUILD_DIR=%ROOT_DIR%\build-win-gcc-16"
|
||||
|
||||
call "%CASE_DIR%..\run_example_case.bat" "%CASE_DIR%" "roll_forming" "--run" "roll_forming_friction_smoke.inp" "10"
|
||||
if errorlevel 1 exit /b %errorlevel%
|
||||
|
||||
set "TOOL=%BUILD_DIR%\roll_forming_kinematics_benchmark.exe"
|
||||
set "INP=%CASE_DIR%roll_forming_kinematics_benchmark.inp"
|
||||
set "OUT_DIR=%CASE_DIR%results\roller_kinematics"
|
||||
if not exist "%OUT_DIR%" mkdir "%OUT_DIR%"
|
||||
del /Q "%OUT_DIR%\roller_kinematics_*.csv" 2>nul
|
||||
|
||||
if not exist "%TOOL%" (
|
||||
echo Building roll_forming_kinematics_benchmark...
|
||||
cmake --build "%BUILD_DIR%" --config Release --target roll_forming_kinematics_benchmark
|
||||
if errorlevel 1 exit /b %errorlevel%
|
||||
)
|
||||
|
||||
"%TOOL%" "%INP%" "%OUT_DIR%"
|
||||
if errorlevel 1 exit /b %errorlevel%
|
||||
|
||||
set "TOOL=%BUILD_DIR%\roll_forming_springback_benchmark.exe"
|
||||
set "INP=%CASE_DIR%roll_forming_springback_benchmark.inp"
|
||||
set "OUT_DIR=%CASE_DIR%results\springback"
|
||||
if not exist "%OUT_DIR%" mkdir "%OUT_DIR%"
|
||||
del /Q "%OUT_DIR%\springback_*.csv" 2>nul
|
||||
del /Q "%OUT_DIR%\plastic_zone.csv" 2>nul
|
||||
|
||||
if not exist "%TOOL%" (
|
||||
echo Building roll_forming_springback_benchmark...
|
||||
cmake --build "%BUILD_DIR%" --config Release --target roll_forming_springback_benchmark
|
||||
if errorlevel 1 exit /b %errorlevel%
|
||||
)
|
||||
|
||||
"%TOOL%" "%INP%" "%OUT_DIR%"
|
||||
exit /b %errorlevel%
|
||||
|
||||
Reference in New Issue
Block a user