Complete V5 acceptance milestone
This commit is contained in:
@@ -1,19 +1,50 @@
|
||||
# Roll Forming Friction Smoke Case
|
||||
# Roll Forming Benchmarks
|
||||
|
||||
This folder contains the original roll-forming reference documents plus a
|
||||
compact FemLite V4.8 smoke case:
|
||||
This folder contains the original roll-forming reference documents plus two
|
||||
compact FemLite V5 entries:
|
||||
|
||||
- `roll_forming_friction_smoke.inp`
|
||||
- `run_case.bat`
|
||||
- `roll_forming_kinematics_benchmark.inp`
|
||||
- `roll_forming_springback_benchmark.inp`
|
||||
|
||||
The reference model describes a quarter-symmetry cold roll-forming process with
|
||||
rigid rollers, friction coefficient 0.30, roller down-feed, roller rotation,
|
||||
workpiece plasticity and residual-stress output. FemLite V4.8 does not claim
|
||||
that complete high-fidelity process simulation. The included input keeps the
|
||||
executable mechanics that the current solver can verify reliably: a C3D8
|
||||
workpiece compressed against a C3D8 roller surrogate, scaled elastic material
|
||||
properties for a stable short explicit run, Coulomb friction, a tangential
|
||||
forming load and contact/friction output.
|
||||
`roll_forming_friction_smoke.inp` is the V4.8 executable mechanics smoke: a
|
||||
C3D8 workpiece compressed against a C3D8 roller surrogate with scaled elastic
|
||||
material properties, Coulomb friction, tangential forming load and contact
|
||||
output.
|
||||
|
||||
`roll_forming_kinematics_benchmark.inp` is the V5.6 roller kinematics benchmark.
|
||||
It drives the production rigid-cylinder/roller modules with translation,
|
||||
down-feed and angular velocity, then compares tangential slip, regularized
|
||||
traction, friction energy, pressure and torque with and without roller spin.
|
||||
|
||||
`roll_forming_springback_benchmark.inp` is the V5.6 plastic forming and
|
||||
springback benchmark. It drives the production roller kinematics, regularized
|
||||
traction, roll metrics and J2 small-strain material update on a compact
|
||||
through-thickness strip model. The benchmark forms the workpiece to a prescribed
|
||||
curvature, unloads by solving for zero resultant bending moment, and writes
|
||||
residual displacement, springback ratio and plastic-zone output.
|
||||
|
||||
Reference checks for the current kinematics input:
|
||||
|
||||
| Metric | Requirement |
|
||||
|---|---:|
|
||||
| Active samples | 6 |
|
||||
| Mean slip with spin | greater than 1.5 x no-spin slip |
|
||||
| Mean regularized traction with spin | greater than 1.1 x no-spin traction |
|
||||
| Max traction delta | greater than 50 |
|
||||
| Friction energy with spin | greater than no-spin energy |
|
||||
| Roller torque with spin | positive |
|
||||
|
||||
Reference checks for the current springback input:
|
||||
|
||||
| Metric | Requirement |
|
||||
|---|---:|
|
||||
| Material points | 81 |
|
||||
| Forming force | between `1.0e4` and `3.0e4` |
|
||||
| Plastic work | positive |
|
||||
| Plastic zone fraction | between `0.20` and `1.0` |
|
||||
| Springback ratio | between `0.05` and `0.95` |
|
||||
| Residual moment | below `1.0e-6` of peak moment scale |
|
||||
|
||||
Run:
|
||||
|
||||
@@ -21,4 +52,14 @@ Run:
|
||||
run_case.bat
|
||||
```
|
||||
|
||||
Results are written to `results\auto_run`.
|
||||
Results are written to:
|
||||
|
||||
- `results\auto_run` for the friction smoke
|
||||
- `results\roller_kinematics` for the kinematics benchmark
|
||||
- `results\springback` for the plastic springback benchmark
|
||||
|
||||
Springback reference outputs include `springback_history.csv`,
|
||||
`springback_summary.csv` and `plastic_zone.csv`. Current reference values are
|
||||
springback ratio `0.473154068`, residual displacement `0.0316107559`, plastic
|
||||
work `1.11591736e-05`, active plastic points `56/81` and residual moment
|
||||
`8.92778801e-11` in absolute value.
|
||||
|
||||
Reference in New Issue
Block a user