# Spherical Cap Central Point Load Benchmark This folder contains a displacement-control FemLite benchmark derived from `models.sme.spherical_cap_with_central_point_load.pdf`: - `generate_spherical_cap.py` - `spherical_cap_displacement_control.inp` - `spherical_cap_displacement_control_shell4.inp` - `check_spherical_cap_results.py` - `run_case.bat` The reference model is the NAFEMS spherical cap postbuckling case: radius `a = 10 m`, thickness `th = 0.203840 m`, `E = 210 GPa`, `nu = 0.3`, cap angle `pi/4`, rim support, and crown displacement control. The Shell-16 baseline keeps the documented polar topology with a crown S3 fan and S4 meridional bands, uses the historical full-rim constraint (`RIM_DOF_MAX=6`), and explicitly requests `SHELL_GEOMETRIC=LINEAR`. The Shell-4 finite-strain target uses the same geometry and material scale, but replaces the crown fan with an all-quadrilateral square-to-disk S4 remesh so that it can enter the V5.11 `SHELL_GEOMETRIC=FINITE_STRAIN` production path. Its rim support intentionally constrains translations only (`RIM_DOF_MAX=3`) to match the PDF shell point/rim-support interpretation used by the diagnostic decks; full rotational rim clamping is not the Shell-4 postbuckling benchmark target because it masks the observed load drop. Both decks prescribe the crown displacement to `-6.2 m`; the reaction is nondimensionalized as ```text Fn = -F*a/(E*th^3*2*pi), wn = -w/th ``` FemLite currently checks the displacement-control shell path that its small-strain shell formulation can support. By default, the checker runs static-linear Shell-16 samples at the PDF table displacement values and writes `spherical_cap_load_displacement.csv`. If the environment variable `FEMLITE_SPHERICAL_CAP_NONLINEAR=1` is set, the checker instead attempts a real `--static-nonlinear` Shell-4 direct-displacement path over the bounded V5.11 post-peak window and validates `continuation_path.csv`, the translational rim support, path-control diagnostics and a reproducible load drop after the first peak. The bounded nonlinear route defaults to `uz=-3.24 m`; it can be changed with `FEMLITE_SPHERICAL_CAP_BOUNDED_UZ`. If `FEMLITE_SPHERICAL_CAP_RIKS=1` is set, the checker runs a separate load-control Shell-4 Riks route. It converts the crown control to a proportional crown `CLOAD`, writes `spherical_cap_riks_load_path.csv`, and validates that the load parameter reaches a real limit-point neighborhood and decreases after the peak while displacement continues to grow. This is a method-4 load-type Riks evidence route for a real post-limit branch segment; broader branch-following generalization is still deferred. V5.11 uses this example as a finite-strain S4 capability proof, not as a claim that the full `uz=-6.2 m` PDF curve has been strictly reproduced. Full Shell-4/8/16 digitized-curve matching, later restiffening-window tuning and late post-peak performance optimization are deferred to the next version. Run: ```bat run_case.bat ``` Results are written to `results\auto_run`. Important output files: - `continuation_path.csv`: production accepted-increment direct displacement path, present only when the optional nonlinear diagnostic route completes. - `spherical_cap_load_displacement.csv`: checker-derived nondimensional `wn = -w/th` and `Fn = -F*a/(E*th^3*2*pi)` curve. - `spherical_cap_riks_load_path.csv`: optional load-control Riks path, present only when `FEMLITE_SPHERICAL_CAP_RIKS=1` completes.