# FEM Interface Control Document 文档状态:接口基线草稿 适用对象:船舶接触爆炸船体结构 FEM 核心库与小型分析程序 ## 1. 文档目的 本文档定义 FEM 核心库对外暴露的调用接口、数组维度、编号规则、内存所有权、错误码、单位制和 SPH-FEM 耦合接口。 本文档是外部程序,特别是 SPH 程序,与 FemLite 进行联调时的接口合同。 ## 2. 接口范围 第一版提供: - Fortran95 原生接口。 - 显式瞬态动力学推进接口。 - Abaqus inp 模型读取接口。 - 外部 SPH 驱动接口。 - 节点力、facet 压力、facet 压力加剪切力接口。 - 节点运动学和单元平均结果查询接口。 - CSV 输出控制接口。 第二版提供: - C ABI 包装层。 - Python 调试接口。 - 高斯点结果查询接口。 - VTK 和 restart 相关接口。 第三版提供: - 线性静力求解接口。 - 非线性静力求解接口。 - 隐式 Newmark 动力学推进接口。 - 静力收敛历史查询接口。 - 节点反力查询接口。 - 接触状态、接触力和接触功查询接口。 第四版扩展: - node-based surface、analytical rigid plane surface 和 contact property 查询/输入子集。 - contact pair active-set、gap residual 和 augmented penalty 诊断接口。 - contact pair 搜索统计接口,用于 V4.4 搜索/并行性能验收。 - 线性求解器设置和最近一次线性求解统计接口,用于 V4.6 内部求解路径切换验收。 - 壳 drilling/S3 剪切锁定控制和稳定性统计接口,用于 V4.7 壳基准验收。 ## 3. 接口设计原则 接口设计遵循: - 第一版只承诺 Fortran95 原生接口。 - 不依赖 Fortran 2003 `iso_c_binding`。 - 不依赖面向对象类型绑定。 - 调用者不直接访问 FEM 内部数据库。 - 外部数组采用调用者分配。 - 查询类接口采用两步查询模式。 - 所有核心接口通过 ierr 返回错误状态。 - warning 只写入日志,不作为 ierr 返回。 - FEM 不做单位转换,调用者必须保证单位一致。 ## 4. 编号与维度约定 ### 4.1 编号约定 外部接口默认使用 Abaqus 原始编号: - node_id 为 Abaqus 输入文件中的节点编号。 - elem_id 为 Abaqus 输入文件中的单元编号。 - facet_id 为 FEM 构造并导出的稳定 facet 编号。 内部可维护连续编号,并提供原始编号和内部编号之间的查询接口。 建议接口: ```fortran subroutine fem_get_internal_node_id(node_id_ext, node_id_int, ierr) subroutine fem_get_internal_elem_id(elem_id_ext, elem_id_int, ierr) subroutine fem_get_external_node_id(node_id_int, node_id_ext, ierr) subroutine fem_get_external_elem_id(elem_id_int, elem_id_ext, ierr) ``` ### 4.2 自由度约定 自由度编号: ```text 1 UX 2 UY 3 UZ 4 RX 5 RY 6 RZ ``` 节点力接口: - `force(3,nnode)` 只作用于平动自由度 UX、UY、UZ。 - 通用自由度接口使用 `node_id + dof + value`。 ### 4.3 数组维度约定 接口数组采用 Fortran 列主序友好的维度: ```fortran coord(3,nnode) velocity(3,nnode) acceleration(3,nnode) normal(3,nfacet) force(3,nnode) shear(3,nfacet) conn(max_face_nodes,nfacet) x(3,max_face_nodes,nfacet) vnod(3,max_face_nodes,nfacet) ``` 所有数组下标从 1 开始。 ## 5. 字符串约定 文件名: ```fortran character(len=*), intent(in) :: filename ``` 内部固定长度: ```text NAME_LEN = 80 ELEM_TYPE_LEN = 16 ``` 对外返回名称时,由调用者提供固定长度字符数组。 ## 6. 内存所有权 第一版采用调用者分配数组的模式。 查询类接口采用两步流程: ```text 1. 调用 fem_get_xxx_size 查询数量和最大维度 2. 调用者 allocate 所需数组 3. 调用 fem_get_xxx_data 填充数组 ``` FEM 内部不返回由库内 allocate 的外部数组指针。 ## 7. 库生命周期接口 标准生命周期: ```fortran subroutine fem_initialize(ierr) integer, intent(out) :: ierr end subroutine subroutine fem_finalize(ierr) integer, intent(out) :: ierr end subroutine ``` 调用规则: - `fem_initialize` 必须在其他接口之前调用。 - `fem_finalize` 负责释放 FEM 内部内存。 - 多次重复初始化和释放应返回明确错误或在日志中记录状态。 ## 8. 模型输入与构建接口 ```fortran subroutine fem_read_inp(filename, ierr) character(len=*), intent(in) :: filename integer, intent(out) :: ierr end subroutine subroutine fem_build_model(ierr) integer, intent(out) :: ierr end subroutine subroutine fem_compute_lumped_mass(ierr) integer, intent(out) :: ierr end subroutine ``` 推荐调用顺序: ```text fem_initialize fem_read_inp fem_build_model fem_compute_lumped_mass ``` 说明: - `fem_read_inp` 只负责读取和解析输入。 - `fem_build_model` 负责内部编号、自由度、facet 和状态变量数据库构建。 - `fem_compute_lumped_mass` 负责形成显式动力学所需集中质量。 ### 8.1 Mohr-Coulomb 材料输入子集 第五版当前支持 Abaqus 风格材料块中的 `*MOHR COULOMB` 子集。该关键字必须位于 `*MATERIAL` 块内,且材料仍需通过 `*ELASTIC` 提供弹性模量和泊松比。数据行格式为: ```inp *MOHR COULOMB friction_angle_deg, cohesion, dilation_angle_deg, tensile_strength residual_friction_angle_deg, residual_cohesion, residual_dilation_angle_deg, reduction_factor ``` 约定: - 角度以 degree 输入,内部转换为 radian。 - `friction_angle_deg` 必须在 `(0, 90)` 内。 - `cohesion`、`tensile_strength` 和 `residual_cohesion` 必须非负。 - `dilation_angle_deg` 必须在 `[0, friction_angle_deg]` 内。 - `reduction_factor < 1` 按 1 处理;大于 1 时用于强度折减材料参数。 - 残余摩擦角、残余黏聚力和残余膨胀角作为折减下限。 解析后数据库字段包括 `mat_mc_phi`、`mat_mc_cohesion`、`mat_mc_dilation`、 `mat_mc_tension`、`mat_mc_res_phi`、`mat_mc_res_cohesion`、 `mat_mc_res_dilation` 和 `mat_mc_reduction`。材料模型名称写入 `mat_plastic_model='MOHR_COULOMB'`,由材料分发层进入 Mohr-Coulomb 更新和切线路径。 ### 8.2 非线性 continuation 方法选择 第五版 0.5.2 开始支持 FemLite 扩展关键字: ```inp *NONLINEAR CONTINUATION, METHOD=value, TARGET_NEWTON=n, GROWTH=g, SHRINK=s, TRUST_RADIUS=r, TRUST_MIN_RADIUS=rmin, TRUST_MAX_RADIUS=rmax, TRUST_GROWTH=tg, TRUST_SHRINK=ts, TRUST_ACCEPT_RATIO=ra, TRUST_GOOD_RATIO=rg, ARC_LENGTH=dl, ARC_LOAD_SCALE=s_lambda, MC_MIN_SUBSTEPS=nmin, MC_MAX_SUBSTEPS=nmax, MC_TARGET_STRAIN=eps, MC_YIELD_TOL=tol, MC_PLASTIC_LIMIT=dpmax, SHELL_GEOMETRIC=LINEAR|FINITE_STRAIN|YES|NO ``` 该关键字为 header-only 控制项,不需要数据行。若省略该关键字, `nonlinear_continuation_method` 默认取 `1`。`METHOD` 可使用数字或符号名: | 数字 | 符号名 | 当前接口含义 | |---:|---|---| | 1 | `TWO_STAGE_LOAD_STRENGTH` | 默认路线;先收敛完整外载,再固定外载推进强度折减因子。 | | 2 | `ADAPTIVE_TARGET_NEWTON` | 目标 Newton 迭代数自适应步长控制。 | | 3 | `TRUST_REGION_DAMPED_NEWTON` | trust-region / damping Newton 控制。 | | 4 | `ARC_LENGTH_OR_DISPLACEMENT_CONTROL` | 载荷型问题使用 Riks/arc-length 增广方程;非零 prescribed-displacement 问题使用直接位移控制 accepted-path 记录;两类控制量均不存在时报错。 | | 5 | `MC_SUBSTEPPING_SEMISMOOTH` | Mohr-Coulomb substepping / semismooth 活动集路线。 | 解析器同时接受常用短名或连字符形式,例如 `LOAD_STRENGTH`、 `TARGET_NEWTON`、`TRUST_REGION`、`ARC_LENGTH`、`DISPLACEMENT_CONTROL` 和 `SUBSTEPPING_SEMISMOOTH`。非法数字或未知名称在输入读取阶段报错,且不修改已存在的 `nonlinear_continuation_method`。 可选控制项: | 参数 | 适用方法 | 合法范围 | 含义 | |---|---|---|---| | `TARGET_NEWTON` 或 `TARGET` | 2 | 正整数 | 目标 Newton 迭代数。 | | `GROWTH` 或 `GROWTH_FACTOR` | 2 | `> 1` | 低迭代接受步后的下一步增长倍率。 | | `SHRINK` 或 `SHRINK_FACTOR` | 2 | `(0, 1)` | 高迭代、cutback 或失败后的下一步收缩倍率。 | | `TRUST_RADIUS` 或 `RADIUS` | 3 | `>= 0` | 初始/current trust radius;0 表示由首个修正自动初始化。 | | `TRUST_MIN_RADIUS` 或 `MIN_RADIUS` | 3 | `> 0` | trust radius 下限。 | | `TRUST_MAX_RADIUS` 或 `MAX_RADIUS` | 3 | `0` 或 `>= TRUST_MIN_RADIUS` | trust radius 上限;0 表示不显式封顶。 | | `TRUST_GROWTH` 或 `TRUST_GROWTH_FACTOR` | 3 | `> 1` | 高质量残差下降后的半径增长倍率。 | | `TRUST_SHRINK` 或 `TRUST_SHRINK_FACTOR` | 3 | `(0, 1)` | 阻尼、拒绝或低质量下降后的半径收缩倍率。 | | `TRUST_ACCEPT_RATIO` 或 `MERIT_ACCEPT_RATIO` | 3 | `[0, 1)` | 小于该 residual merit 下降率时收缩半径。 | | `TRUST_GOOD_RATIO` 或 `MERIT_GOOD_RATIO` | 3 | `(0, 1]` 且 `>= TRUST_ACCEPT_RATIO` | 达到该下降率且无阻尼/拒绝时增长半径。 | | `ARC_LENGTH` 或 `ARC_RADIUS` | 4 | `>= 0` | Riks 球面约束半径;`0` 表示使用当前静力增量长度。 | | `ARC_LOAD_SCALE`、`RIKS_LOAD_SCALE` 或 `LOAD_SCALE` | 4 | `> 0` | `load_factor` 在弧长约束中的缩放,默认 `1`。 | | `MC_MIN_SUBSTEPS` 或 `MIN_SUBSTEPS` | 5 | 正整数 | Mohr-Coulomb 局部积分最小子步数,默认 `1`。 | | `MC_MAX_SUBSTEPS` 或 `MAX_SUBSTEPS` | 5 | 正整数且 `>= MC_MIN_SUBSTEPS` | Mohr-Coulomb 局部积分最大子步数,默认 `64`。 | | `MC_TARGET_STRAIN` 或 `TARGET_STRAIN` | 5 | `> 0` | 按最大应变增量选择子步数的目标应变尺度,默认 `2.5e-3`。 | | `MC_YIELD_TOL`、`MC_YIELD_TOLERANCE` 或 `YIELD_TOL` | 5 | `>= 0` | 子步返回后正屈服残差触发 limited 状态的容差,默认 `1.0e-7`。 | | `MC_PLASTIC_LIMIT` 或 `PLASTIC_LIMIT` | 5 | `> 0` | 单子步塑性增量触发 limited 状态的上限,默认 `5.0e-2`。 | | `SHELL_GEOMETRIC` | S4 nonlinear shell | 目标接口为 `LINEAR` 或 `FINITE_STRAIN`;迁移期兼容 `YES/TRUE/ON/1` 和 `NO/FALSE/OFF/0` | `FINITE_STRAIN` 请求 V5.11 后续 Abaqus-style finite-membrane-strain S4 路线;`YES` 仅作为迁移期兼容写法。 | | `GEOMETRIC_SHELL`、`COROTATIONAL_SHELL`、`S4_COROTATIONAL` | deprecated | 迁移期布尔兼容 | 这些名称来自 corotational 尝试,不能作为稳定接口;finite-strain S4 生产路径落地时必须删除解析、文档、测试和示例入口。 | 所有非法控制值在输入读取阶段报错,且不修改此前有效的 continuation 控制状态。 当前已完成生产输入接口、默认值、非法值校验和诊断记录。方法 1 已在 strengthReduction nonlinear chain/cloud 工作流中接入两阶段 load-strength continuation,并通过 `static_ramp_load` 让第二阶段在固定外载下使用伪时间推进材料 强度折减因子;方法 2 已接入生产目标 Newton 步长控制;方法 3 已接入生产 trust-region damped Newton 控制;方法 4 已接入载荷型 Riks/arc-length 增广方程、 直接位移控制 accepted increment 路径记录、无控制量时的显式 solver error、 Fortran API 查询和 `continuation_path.csv` 输出;方法 5 已接入生产 Mohr-Coulomb 材料点子步和活动集诊断,并在 strengthReduction nonlinear chain/cloud/progress 输出中汇总结构级 MC 子步和分支状态。0.75 m 全模型长跑仍在 NC-1/SR-1 收束中。方法 4 的真实非单调结构路径验收、方法 5 的 longrun 效果证明 继续按 `docs/v5_development_plan.md` 的 NC-4 至 NC-5 实现。 当 `METHOD=MC_SUBSTEPPING_SEMISMOOTH` 时,材料点状态变量额外约定: ```text statev(27) accepted substeps statev(28) requested substeps statev(29) driver status, 0 OK and 1 limited statev(30) branch mask, elastic=1, shear=2, tension=4, mixed=8 statev(31) max positive yield residual statev(32) max plastic increment ``` strengthReduction nonlinear chain/cloud/progress CSV 的 continuation 诊断字段包括: ```text continuation_method,target_dt,actual_dt,next_dt,adapt_adjust, trust_radius,next_trust_radius,damping,merit_ratio,trust_rejections,trust_adjust, mc_points,mc_updated_points,mc_substeps,mc_requested_substeps,mc_limited_points, mc_branch_mask,mc_max_yield,mc_max_plastic_step ``` summary CSV 还记录 `target_newton`、`growth_factor`、`shrink_factor`、 `trust_radius`、`trust_min_radius`、`trust_max_radius`、`trust_growth_factor`、 `trust_shrink_factor`、`trust_accept_ratio`、`trust_good_ratio`、`last_trust_radius`、 `next_trust_radius`、`last_damping`、`last_merit_ratio`、 `last_trust_rejections`、`last_trust_adjust`、`mc_min_substeps`、 `mc_max_substeps`、`mc_target_strain`、`mc_yield_tol`、`mc_plastic_limit` 以及同名结构级 MC 聚合字段。`mc_branch_mask` 为积分点分支 bit OR 结果: elastic=1、shear=2、tension=4、mixed=8。 当 `METHOD=ARC_LENGTH_OR_DISPLACEMENT_CONTROL` 且存在 accepted path 数据时,标准 CSV 输出目录中会新增 `continuation_path.csv`,字段为: ```text step,time,control_parameter,control_dof_count, prescribed_l2,prescribed_max,actual_l2,actual_max, constraint_residual_linf,constraint_residual_l2, control_reaction_sum,control_reaction_generalized,control_work, iterations,residual_norm,relative_residual,correction_norm, status_code,failure_code ``` 其中 prescribed/actual 位移使用求解时实际施加的 `load_factor * amplitude(t) * boundary_value` 口径;直接位移路径的 control parameter 等于 accepted increment 的伪时间;载荷型 Riks 路径中该字段为求解得到的 `load_factor`。V5.11 目标接口是 `SHELL_GEOMETRIC=FINITE_STRAIN`,对应完整 finite-membrane-strain S4 formulation、有限转动 director、MITC/ANS assumed strain 和解析一致切线。当前 corotational S4 路径只作为迁移期临时代码和诊断基础, 不表示完整 Shell-4/8/16 后屈曲验收已经完成;其专用别名和生产 dispatch 在完整路线 落地后必须删除。方法 4 后续扩展真实非单调结构验收时应保持 `continuation_path.csv` 字段向后兼容。 ### 8.3 Benchmark 工具输入子集 `tools/benchmarks` 下的程序是验收编排工具,不属于 `fem_read_inp` 的通用 Abaqus 子集。它们可以读取小型专用输入以驱动核心模块验证,但不得把专用 keyword 宣称为主求解器接口。 主 `femlite --buckling` Euler 柱屈曲路径和兼容包装 `euler_column_buckling_benchmark` 当前读取如下专用块: ```inp *BUCKLING COLUMN E, I, L, element_count, effective_length_factor ``` 字段含义: - `E`:弹性模量。 - `I`:梁截面二次矩。 - `L`:柱长。 - `element_count`:Euler-Bernoulli 梁单元数量,当前要求不少于 2。 - `effective_length_factor`:Euler 解析临界载荷中的有效长度系数。 主程序通过 `fem_buckling_column` 装配梁弯曲刚度,调用生产 `geom_beam2d_column_stiffness` 和 `buckling_dense_solve`,输出 `buckling_summary.csv` 与 `buckling_mode_1.csv`。该块是已接入主程序的 Euler 柱专用生产入口;它不等同于完整 Abaqus 风格通用 `*BUCKLING` step。 静力预载 step 联动、壳/实体几何刚度装配、循环扇区约束和模态 VTK 输出仍属于 V5.5 后续工程接口。`tools/benchmarks/euler_column_buckling_benchmark` 只保留为 调用同一生产模块的兼容薄包装,不应再维护独立屈曲算法。 `corrugated_shell_buckling_benchmark` 当前读取如下专用块: ```inp *CORRUGATED SHELL BUCKLING sectors, selected_wave, output_mode_count, bottom_radius, top_radius, height, thickness young, poisson, stiffness_coupling_ratio, geometric_coupling_ratio, corrugation_factor ``` 字段含义: - `sectors`:周期扇区数。 - `selected_wave`:要与全模型特征值比较的循环波数。 - `output_mode_count`:写入 modal CSV 的低阶模态数量。 - `bottom_radius`、`top_radius`、`height`、`thickness`:参考波纹锥壳尺度。 - `young`、`poisson`:材料弹性参数。 - `stiffness_coupling_ratio`、`geometric_coupling_ratio`:周期相邻扇区刚度和几何刚度耦合比例。 - `corrugation_factor`:波纹增强因子,用于形成紧凑 benchmark 的基础弯曲刚度。 该工具输出 `corrugated_buckling_summary.csv`、`corrugated_buckling_waves.csv`、 `corrugated_buckling_modes.csv` 和 `corrugated_buckling_profile.csv`。它用于 验证内部屈曲求解、循环波数一致性和 modal CSV 输出,不代表主求解器已经支持 完整 Abaqus 风格屈曲 step。 `roll_forming_kinematics_benchmark` 当前读取如下专用块: ```inp *ROLLER KINEMATICS radius, normal_force, mu, feed_rate, down_rate, angular_speed, reference_speed, duration, samples ``` 字段含义: - `radius`:刚体辊半径。 - `normal_force`:用于牵引和压力指标的参考法向力。 - `mu`:摩擦系数。 - `feed_rate`、`down_rate`:进给和下压速度。 - `angular_speed`:绕辊轴角速度。 - `reference_speed`:正则化牵引中的滑移速度尺度;0 表示经典 Coulomb 幅值。 - `duration`、`samples`:输出历史采样时间和采样数。 该工具输出 `roller_kinematics_history.csv` 和 `roller_kinematics_summary.csv`,用于验证角速度进入接触相对切向速度、正则化 牵引、摩擦能、压力和扭矩指标。它不是主 `femlite` 输入语法的一部分。 `roll_forming_springback_benchmark` 当前读取如下专用块: ```inp *ROLL FORMING SPRINGBACK thickness, half_width, strips, layers, length, radius, feed_total, down_total, angular_speed, normal_force, mu, reference_speed, duration, E, nu, yield, hardening, target_curvature, samples ``` 字段含义: - `thickness`、`half_width`、`strips`、`layers`:紧凑多层工件截面离散。 - `length`:用于残余位移和回弹位移指标的跨距。 - `radius`、`feed_total`、`down_total`、`angular_speed`、`normal_force`、`mu`、 `reference_speed`、`duration` 和 `samples`:滚压运动学、牵引和历史采样参数。 - `E`、`nu`、`yield` 和 `hardening`:J2 小应变材料点参数。 - `target_curvature`:成形目标曲率。 该工具输出 `springback_history.csv`、`springback_summary.csv` 和 `plastic_zone.csv`,用于验证塑性功、塑性区、成形力、卸载残余弯矩、残余位移 和 springback ratio。它同样不是主 `femlite` 输入语法的一部分。 `ball_adhesion_cohesive_benchmark` 当前读取如下专用块: ```inp *BALL ADHESION COHESIVE ball_radius, contact_radius, rings, samples, duration, max_indentation, max_opening, normal_stiffness, tangent_stiffness, normal_strength, tangent_strength, fracture_energy_i, fracture_energy_ii, mode_mix_eta, compression_factor, slip_ratio ``` 字段含义: - `ball_radius`、`contact_radius`:球半径和 compact 粘附区半径。 - `rings`、`samples`:同心环数量和 force-displacement 采样点数。 - `max_indentation`、`max_opening`:压入和拉脱位移幅值。 - `normal/tangent_stiffness`、`normal/tangent_strength`、`fracture_energy_i/ii`、 `mode_mix_eta` 和 `compression_factor`:传给 `cohesive_params_init` 的 traction-separation 参数。 - `slip_ratio`:拉脱阶段切向滑移与正开口的比例。 该工具输出 `adhesion_history.csv`、`adhesion_summary.csv` 和 `decohesion_profile.csv`,用于验证 force-displacement hysteresis、peak pull-off force、cohesive energy、damage 和 decohesion area。它同样不是主 `femlite` 输入语法的一部分。 ## 9. 求解控制接口 ```fortran subroutine fem_estimate_stable_dt(dtcrit, ierr) real(rk), intent(out) :: dtcrit integer, intent(out) :: ierr end subroutine subroutine fem_advance_explicit(dt, ierr) real(rk), intent(in) :: dt integer, intent(out) :: ierr end subroutine subroutine fem_get_current_time(time, step, ierr) real(rk), intent(out) :: time integer, intent(out) :: step integer, intent(out) :: ierr end subroutine ``` 独立程序模式: - `femlite` 读取 inp 后控制时间循环。 - 输出由 `femlite` 按控制参数调用。 外部 SPH 驱动模式: ```text fem_get_boundary_facets external SPH calculation fem_clear_sph_forces fem_apply_sph_xxx fem_advance_explicit(dt) ``` 在 SPH 驱动模式下,时间步长由外部程序传入。 第三版静力和隐式动力接口: ```fortran subroutine fem_solve_static_linear(max_iter, tol, iter, res_norm, ierr) integer, intent(in) :: max_iter real(rk), intent(in) :: tol integer, intent(out) :: iter real(rk), intent(out) :: res_norm integer, intent(out) :: ierr end subroutine subroutine fem_solve_static_nonlinear(max_increment, max_iter, tol, & iter, res_norm, ierr) integer, intent(in) :: max_increment integer, intent(in) :: max_iter real(rk), intent(in) :: tol integer, intent(out) :: iter real(rk), intent(out) :: res_norm integer, intent(out) :: ierr end subroutine subroutine fem_advance_implicit_newmark(dt, max_iter, tol, iter, res_norm, ierr) real(rk), intent(in) :: dt integer, intent(in) :: max_iter real(rk), intent(in) :: tol integer, intent(out) :: iter real(rk), intent(out) :: res_norm integer, intent(out) :: ierr end subroutine subroutine fem_run_implicit_newmark(max_iter, tol, iter_total, res_norm, ierr) integer, intent(in) :: max_iter real(rk), intent(in) :: tol integer, intent(out) :: iter_total real(rk), intent(out) :: res_norm integer, intent(out) :: ierr end subroutine subroutine fem_advance_newmark_nonlinear(dt, max_iter, tol, iter, res_norm, ierr) real(rk), intent(in) :: dt integer, intent(in) :: max_iter real(rk), intent(in) :: tol integer, intent(out) :: iter real(rk), intent(out) :: res_norm integer, intent(out) :: ierr end subroutine subroutine fem_run_newmark_nonlinear(max_iter, tol, iter_total, res_norm, ierr) integer, intent(in) :: max_iter real(rk), intent(in) :: tol integer, intent(out) :: iter_total real(rk), intent(out) :: res_norm integer, intent(out) :: ierr end subroutine subroutine fem_set_rayleigh_damping(alpha_mass, beta_stiffness, ierr) real(rk), intent(in) :: alpha_mass real(rk), intent(in) :: beta_stiffness integer, intent(out) :: ierr end subroutine ``` 说明: - 静力接口不要求调用 `fem_compute_lumped_mass`。 - 隐式动力接口可复用质量矩阵、阻尼矩阵、CSR 矩阵和边界条件数据库。 - `fem_solve_static_linear` 与命令行 `--static-linear` 对应。 - `--implicit-linear` 保留为 `--static-linear` 的兼容别名。 - 命令行 `--allow-cutback`、`--max-newton n` 和 `--newton-tol value` 分别写入 `allow_step_cutback`、`max_newton_iter` 和 `newton_tol_force`,用于非线性 静力与非线性 Newmark 入口。 - `fem_run_implicit_newmark` 使用输入文件中的时间控制运行到 `time_end`。 - `fem_run_newmark_nonlinear` 使用输入文件中的时间控制运行到 `time_end`,对应命令行 `--implicit-newmark-nonlinear`。 - `fem_set_rayleigh_damping` 设置 `C = alpha_mass M + beta_stiffness K`。 - 非线性 Newmark Fortran95 接口当前接入实体 J2 算法切线、壳膜内/弯曲/剪切 J2/J2_JC section tangent、trial/restore/commit、线搜索、可选步长缩减、Robin/MPC 切线、刚性平面 penalty contact 切线和面-面 contact pair 切线;C ABI 和 Python 调试接口跟随扩展。 ## 10. 载荷接口 ### 10.1 外力清零 ```fortran subroutine fem_clear_external_forces(ierr) integer, intent(out) :: ierr end subroutine subroutine fem_clear_sph_forces(ierr) integer, intent(out) :: ierr end subroutine ``` SPH 耦合规则: - 外部程序每个时间步显式调用 `fem_clear_sph_forces`。 - 然后调用 SPH 载荷施加接口。 - 最后调用 `fem_advance_explicit(dt)`。 - `fem_advance_explicit` 不应自动清除刚传入的 `fsph`。 ### 10.2 节点力 ```fortran subroutine fem_apply_nodal_force(nnode_in, node_id, force, ierr) integer, intent(in) :: nnode_in integer, intent(in) :: node_id(nnode_in) real(rk), intent(in) :: force(3,nnode_in) integer, intent(out) :: ierr end subroutine ``` 说明: - `node_id` 使用 Abaqus 原始节点编号。 - `force` 使用全局坐标。 - 只作用于平动自由度。 ### 10.3 通用自由度载荷 ```fortran subroutine fem_apply_dof_force(nitem, node_id, dof, value, ierr) integer, intent(in) :: nitem integer, intent(in) :: node_id(nitem) integer, intent(in) :: dof(nitem) real(rk), intent(in) :: value(nitem) integer, intent(out) :: ierr end subroutine ``` 说明: - `dof` 采用 1 到 6 的自由度编号。 - 非激活自由度应返回错误。 ## 11. SPH-FEM 耦合接口 ### 11.1 facet 数量查询 ```fortran subroutine fem_get_boundary_facet_count(nfacet, max_face_nodes, ierr) integer, intent(out) :: nfacet integer, intent(out) :: max_face_nodes integer, intent(out) :: ierr end subroutine ``` ### 11.2 facet 数据查询 ```fortran subroutine fem_get_boundary_facets(nfacet_in, max_face_nodes_in, & facet_id, elem_id, face_id, facet_nnode, & facet_conn, x, vnod, normal, area, ierr) integer, intent(in) :: nfacet_in integer, intent(in) :: max_face_nodes_in integer, intent(out) :: facet_id(nfacet_in) integer, intent(out) :: elem_id(nfacet_in) integer, intent(out) :: face_id(nfacet_in) integer, intent(out) :: facet_nnode(nfacet_in) integer, intent(out) :: facet_conn(max_face_nodes_in,nfacet_in) real(rk), intent(out) :: x(3,max_face_nodes_in,nfacet_in) real(rk), intent(out) :: vnod(3,max_face_nodes_in,nfacet_in) real(rk), intent(out) :: normal(3,nfacet_in) real(rk), intent(out) :: area(nfacet_in) integer, intent(out) :: ierr end subroutine ``` 说明: - `elem_id` 使用 Abaqus 原始单元编号。 - `facet_conn` 使用 Abaqus 原始节点编号。 - `normal` 为固体外法向。 - 删除单元对应 facet 不应作为有效 facet 导出。 - 外部程序接受 `x(3,max_face_nodes,nfacet)` 和 `vnod(3,max_face_nodes,nfacet)` 三维数组。 ### 11.3 SPH 节点力输入 ```fortran subroutine fem_apply_sph_nodal_forces(nnode_in, node_id, force, ierr) integer, intent(in) :: nnode_in integer, intent(in) :: node_id(nnode_in) real(rk), intent(in) :: force(3,nnode_in) integer, intent(out) :: ierr end subroutine ``` ### 11.4 SPH facet 压力输入 ```fortran subroutine fem_apply_sph_facet_pressure(nfacet_in, facet_id, pressure, ierr) integer, intent(in) :: nfacet_in integer, intent(in) :: facet_id(nfacet_in) real(rk), intent(in) :: pressure(nfacet_in) integer, intent(out) :: ierr end subroutine ``` 压力约定: ```text p > 0 means compression t = -p n ``` ### 11.5 SPH facet 压力与剪切输入 ```fortran subroutine fem_apply_sph_facet_tractions(nfacet_in, facet_id, pressure, shear, ierr) integer, intent(in) :: nfacet_in integer, intent(in) :: facet_id(nfacet_in) real(rk), intent(in) :: pressure(nfacet_in) real(rk), intent(in) :: shear(3,nfacet_in) integer, intent(out) :: ierr end subroutine ``` 剪切约定: - `shear(3,nfacet)` 为全局坐标下的剪切牵引向量。 - FEM 将 `-p n + shear` 映射为 facet 等效节点力。 ## 12. 结果查询接口 ### 12.1 节点运动学 ```fortran subroutine fem_get_nodal_kinematics(nnode_in, node_id, uout, vout, aout, ierr) integer, intent(in) :: nnode_in integer, intent(in) :: node_id(nnode_in) real(rk), intent(out) :: uout(3,nnode_in) real(rk), intent(out) :: vout(3,nnode_in) real(rk), intent(out) :: aout(3,nnode_in) integer, intent(out) :: ierr end subroutine ``` 说明: - 第一版只返回平动位移、速度、加速度。 - 壳节点转角查询可在第二版扩展。 ### 12.2 单元状态 ```fortran subroutine fem_get_element_status(nelem_in, elem_id, status, ierr) integer, intent(in) :: nelem_in integer, intent(in) :: elem_id(nelem_in) integer, intent(out) :: status(nelem_in) integer, intent(out) :: ierr end subroutine ``` 状态约定: ```text 0 active 1 deleted 2 inactive by input ``` ### 12.3 单元平均结果 ```fortran subroutine fem_get_element_average_state(nelem_in, elem_id, stress, strain, & plastic_strain, eqps, damage, ierr) integer, intent(in) :: nelem_in integer, intent(in) :: elem_id(nelem_in) real(rk), intent(out) :: stress(6,nelem_in) real(rk), intent(out) :: strain(6,nelem_in) real(rk), intent(out) :: plastic_strain(6,nelem_in) real(rk), intent(out) :: eqps(nelem_in) real(rk), intent(out) :: damage(nelem_in) integer, intent(out) :: ierr end subroutine ``` 说明: - 第一版返回单元平均值。 - 高斯点查询作为第二版高级接口实现。 ### 12.4 节点反力 第三版提供节点反力查询: ```fortran subroutine fem_get_nodal_reactions(nnode_in, node_id, reaction, ierr) integer, intent(in) :: nnode_in integer, intent(in) :: node_id(nnode_in) real(rk), intent(out) :: reaction(6,nnode_in) integer, intent(out) :: ierr end subroutine ``` 说明: - `reaction(1:3,:)` 为平动反力。 - `reaction(4:6,:)` 为转动反力或力矩。 - 实体单元未激活转动自由度时,对应分量返回 0。 ### 12.5 静力收敛历史 第三版提供当前或最近一次静力/隐式求解收敛状态查询: ```fortran subroutine fem_get_convergence_status(increment, iteration, residual_norm, & correction_norm, converged, ierr) integer, intent(out) :: increment integer, intent(out) :: iteration real(rk), intent(out) :: residual_norm real(rk), intent(out) :: correction_norm logical, intent(out) :: converged integer, intent(out) :: ierr end subroutine subroutine fem_get_convergence_metrics(relative_residual_norm, & contact_gap_norm, combined_norm, ierr) real(rk), intent(out) :: relative_residual_norm real(rk), intent(out) :: contact_gap_norm real(rk), intent(out) :: combined_norm integer, intent(out) :: ierr end subroutine subroutine fem_get_convergence_diagnostics(cutback_count, last_dt, & last_accepted_time, status_code, & failure_code, ierr) integer, intent(out) :: cutback_count real(rk), intent(out) :: last_dt real(rk), intent(out) :: last_accepted_time integer, intent(out) :: status_code integer, intent(out) :: failure_code integer, intent(out) :: ierr end subroutine ``` 说明: - `increment` 为最近一次静力/隐式求解尝试的实际步号或增量号。 - `iteration` 为该增量内最近一次 Newton 迭代号;求解尚未开始时为 0。 - `residual_norm` 为最近一次力残差范数。 - `correction_norm` 为最近一次位移修正范数;线性路径或尚未形成修正时为 0。 对 `METHOD=TRUST_REGION_DAMPED_NEWTON`,该值为 trust radius 和 damping 处理后 实际应用的修正范数。 - `converged` 表示最近一次记录的增量是否已满足收敛准则。 - `relative_residual_norm` 为力残差相对参考外力范数的比值。 - `contact_gap_norm` 为最近一次接触力评估中的最大 contact gap residual。 - `combined_norm` 为相对力残差、位移修正范数和 contact gap residual 的最大值,用于统一诊断多准则收敛状态。 - `cutback_count` 为最近一次静力/非线性 Newmark 运行累计触发的步长缩减次数。 - `last_dt` 为最近一次记录的静力增量长度或 Newmark 时间步长。 - `last_accepted_time` 为最近一次已提交成功的求解时间;失败并回滚时保持为最后有效时间。 - `status_code` 使用 `CONVERGENCE_STATUS_IDLE=0`、`ITERATING=1`、`CONVERGED=2`、`CUTBACK=3`、`FAILED=-1`。 - `failure_code` 使用 `CONV_FAIL_NONE=0`、`CONV_FAIL_NONCONVERGENCE=1`、`CONV_FAIL_CUTBACK_LIMIT=2`、`CONV_FAIL_STOPPED=3`。 - V4.5 起,非线性静力 Newton 迭代、静力 cutback 失败路径、非线性 Newmark cutback 运行和接触力评估会更新该状态;contact gap/mortar residual 当前作为 diagnostics 进入多准则统计,硬收敛判据仍以力残差为主。 第五版 0.5.2 追加 continuation path 查询: ```fortran subroutine fem_get_continuation_path_count(count, ierr) integer, intent(out) :: count integer, intent(out) :: ierr end subroutine subroutine fem_get_continuation_path_row(index, step, time, control_parameter, & control_dof_count, prescribed_l2, prescribed_max, actual_l2, actual_max, & residual_linf, residual_l2, reaction_sum, reaction_generalized, work, & iteration, residual_norm, relative_residual, correction_norm, status_code, & failure_code, ierr) integer, intent(in) :: index integer, intent(out) :: step, control_dof_count, iteration integer, intent(out) :: status_code, failure_code, ierr real(rk), intent(out) :: time, control_parameter real(rk), intent(out) :: prescribed_l2, prescribed_max, actual_l2, actual_max real(rk), intent(out) :: residual_linf, residual_l2 real(rk), intent(out) :: reaction_sum, reaction_generalized, work real(rk), intent(out) :: residual_norm, relative_residual, correction_norm end subroutine ``` `index` 从 1 开始;越界返回输入错误。当前该 API 覆盖 `METHOD=4` 的直接 prescribed-displacement accepted path 和载荷型 Riks path;后续非单调结构验收应复用同一查询接口。 ### 12.6 线性求解器控制 V4.6 提供内部线性求解器配置和最近一次求解统计查询: ```fortran subroutine fem_set_linear_solver(method, preconditioner, ierr) integer, intent(in) :: method integer, intent(in) :: preconditioner integer, intent(out) :: ierr end subroutine subroutine fem_get_linear_solver_settings(method, preconditioner, ierr) integer, intent(out) :: method integer, intent(out) :: preconditioner integer, intent(out) :: ierr end subroutine subroutine fem_get_linear_solver_stats(method, preconditioner, iteration, & residual_norm, status_code, ierr) integer, intent(out) :: method integer, intent(out) :: preconditioner integer, intent(out) :: iteration real(rk), intent(out) :: residual_norm integer, intent(out) :: status_code integer, intent(out) :: ierr end subroutine subroutine fem_get_linsol_diagnostics(matrix_class, initial_residual, & final_residual, relative_residual, & status_code, ierr) integer, intent(out) :: matrix_class real(rk), intent(out) :: initial_residual real(rk), intent(out) :: final_residual real(rk), intent(out) :: relative_residual integer, intent(out) :: status_code integer, intent(out) :: ierr end subroutine ``` 说明: - `method` 使用 `LSOLVER_CG=1`、`LSOLVER_BICGSTAB=2`、 `LSOLVER_GMRES=3`、`LSOLVER_DENSE=4`。 - `preconditioner` 使用 `LPRECOND_NONE=0`、`LPRECOND_JACOBI=1`、 `LPRECOND_GAUSS_SEIDEL=2`、`LPRECOND_ILU0=3`;`LSOLVER_DENSE` 忽略预条件器并记录实际配置值。 - `status_code` 使用 `LS_STATUS_IDLE=0`、`LS_STATUS_CONVERGED=1`、`LS_STATUS_FAILED=-1`。 - CG 主要面向对称正定系统;BiCGSTAB 和 GMRES 可用于非对称 CSR 小系统; DENSE 是内部 dense pivoting fallback,用于小中型回归矩阵或非线性修正诊断, 不是第三方 sparse-direct 后端。 - `matrix_class` 使用 `FEMLITE_CSR_CLASS_GENERAL=1`、`STRUCT_SYM=2`、 `SYMMETRIC=3`、`SPD_CAND=4`。分发层在调用内部 Krylov 求解器前 分析 CSR 图案、对角项和数值对称性,并记录初始残差、最终残差和最终相对残差。 - 非上述 method 值为非法配置;旧外部求解器 method 数值也必须返回错误,并保持当前 method/preconditioner 设置不变。 - 静力、隐式 Newmark 和非线性 Newton 修正方程均通过同一分发层求解。 ### 12.7 壳稳定控制 V4.7 提供壳单元稳定参数设置和最近一次壳刚度装配统计查询: ```fortran subroutine fem_set_shell_stabilization(drilling_factor, s3_shear_factor, & s3_shear_min_scale, ierr) real(rk), intent(in) :: drilling_factor real(rk), intent(in) :: s3_shear_factor real(rk), intent(in) :: s3_shear_min_scale integer, intent(out) :: ierr end subroutine subroutine fem_get_shell_stabilization(drilling_factor, s3_shear_factor, & s3_shear_min_scale, ierr) real(rk), intent(out) :: drilling_factor real(rk), intent(out) :: s3_shear_factor real(rk), intent(out) :: s3_shear_min_scale integer, intent(out) :: ierr end subroutine subroutine fem_get_shell_stability_stats(sample_count, last_element, & last_drilling_stiffness, & last_shear_scale, min_shear_scale, & max_drilling_stiffness, ierr) integer, intent(out) :: sample_count integer, intent(out) :: last_element real(rk), intent(out) :: last_drilling_stiffness real(rk), intent(out) :: last_shear_scale real(rk), intent(out) :: min_shear_scale real(rk), intent(out) :: max_drilling_stiffness integer, intent(out) :: ierr end subroutine ``` C ABI 对应函数为: ```c int femlite_set_shell_stabilization(double drilling_factor, double s3_shear_factor, double s3_shear_min_scale); int femlite_get_shell_stabilization(double *drilling_factor, double *s3_shear_factor, double *s3_shear_min_scale); int femlite_get_shell_stability_stats(int *sample_count, int *last_element, double *last_drilling_stiffness, double *last_shear_scale, double *min_shear_scale, double *max_drilling_stiffness); ``` 说明: - 默认值为 `drilling_factor=1.0e-4`、`s3_shear_factor=0.0625`、`s3_shear_min_scale=1.0e-4`。 - `drilling_factor` 取值范围为 `[0,1]`,`s3_shear_factor >= 0`,`s3_shear_min_scale` 取值范围为 `(0,1]`。 - 统计量在 `control_set_defaults` 时清零;每次壳单元刚度装配后记录最近样本,并累计最小 S3 剪切折减和最大 drilling 刚度。 ### 12.8 接触状态 第三版提供接触结果查询接口: ```fortran subroutine fem_get_contact_summary(active_count, work_step, work_total, & max_penetration, force_norm, ierr) integer, intent(out) :: active_count real(rk), intent(out) :: work_step real(rk), intent(out) :: work_total real(rk), intent(out) :: max_penetration real(rk), intent(out) :: force_norm integer, intent(out) :: ierr end subroutine ``` 第四版追加接触诊断查询接口,不改变旧 summary 接口: ```fortran subroutine fem_get_contact_diagnostics(active_pair_count, & activated_pair_count, & maintained_pair_count, & released_pair_count, & max_gap_residual, max_aug_lambda, ierr) integer, intent(out) :: active_pair_count integer, intent(out) :: activated_pair_count integer, intent(out) :: maintained_pair_count integer, intent(out) :: released_pair_count real(rk), intent(out) :: max_gap_residual real(rk), intent(out) :: max_aug_lambda integer, intent(out) :: ierr end subroutine ``` - `active_pair_count`:最近一次接触力评估中至少有一个激活贡献的 contact pair 数。 - `activated_pair_count`:本次由 open 切换为 active 的 pair 数。 - `maintained_pair_count`:本次保持 active 的 pair 数。 - `released_pair_count`:本次由 active 切换为 open 的 pair 数。 - `max_gap_residual`:逐 pair gap 残差最大值,当前定义为最近一次力评估中的最大穿透量。 - `max_aug_lambda`:逐 pair augmented penalty 法向乘子最大值。 第四版 V4.3 起步追加摩擦输出查询接口: ```fortran subroutine fem_get_contact_friction(work_step, work_total, & max_accumulated_slip, ierr) real(rk), intent(out) :: work_step real(rk), intent(out) :: work_total real(rk), intent(out) :: max_accumulated_slip integer, intent(out) :: ierr end subroutine ``` - `work_step`:最近一次接触评估中的正摩擦耗散功估计。 - `work_total`:累计正摩擦耗散功估计。 - `max_accumulated_slip`:逐 contact pair 累计滑移最大值。 V4.3 进一步追加 mortar 积分点级历史统计接口: ```fortran subroutine fem_get_contact_hist_stats(slot_count, max_slot_slip, & max_slot_work, max_tangent_force, ierr) integer, intent(out) :: slot_count real(rk), intent(out) :: max_slot_slip real(rk), intent(out) :: max_slot_work real(rk), intent(out) :: max_tangent_force integer, intent(out) :: ierr end subroutine ``` - `slot_count`:当前模型内已创建的 mortar 积分点摩擦历史槽数量。 - `max_slot_slip`:单个历史槽的最大累计滑移。 - `max_slot_work`:单个历史槽的最大累计摩擦功。 - `max_tangent_force`:单个历史槽中历史切向力模长最大值。 - 当前历史槽键为 `pair + slave element/face + master element/face + point_id`,其中 `point_id` 是该 slave/master facet overlap 内的 mortar 积分点序号。 V4.4 起步追加 contact pair 搜索统计接口: ```fortran subroutine fem_get_contact_search_stats(facet_count, master_count, & broad_count, active_count, & bvh_node_count, ierr) integer, intent(out) :: facet_count integer, intent(out) :: master_count integer, intent(out) :: broad_count integer, intent(out) :: active_count integer, intent(out) :: bvh_node_count integer, intent(out) :: ierr end subroutine ``` - `facet_count`:最近一次接触力评估中累计处理的 boundary facet 数;多 contact pair 时按 pair 评估次数累计。 - `master_count`:最近一次接触力评估中累计识别的 master facet 数。 - `broad_count`:搜索第一遍候选评估次数;全搜索、uniform grid 和 BVH 路径均记录。 - `active_count`:候选评估中判定为接触激活的次数。 - `bvh_node_count`:最近一次接触力评估累计构建的 BVH 节点数;非 BVH 路径为 0。 V4.4 追加接触性能计时接口,时间单位为秒,口径为 Fortran `cpu_time`: ```fortran subroutine fem_get_contact_perf_stats(search_time, force_time, & tangent_time, ierr) real(rk), intent(out) :: search_time real(rk), intent(out) :: force_time real(rk), intent(out) :: tangent_time integer, intent(out) :: ierr end subroutine ``` - `search_time`:最近一次接触状态周期内 contact pair 搜索准备和第一遍候选评估累计 CPU 时间。 - `force_time`:最近一次 `contact_apply_plane_forces` 总 CPU 时间。 - `tangent_time`:最近一次接触切线装配累计 CPU 时间;若未调用切线装配则为 0。 V4.4 追加 BVH 局部候选缓存统计接口: ```fortran subroutine fem_get_contact_cache_stats(used_count, overflow_count, ierr) integer, intent(out) :: used_count integer, intent(out) :: overflow_count integer, intent(out) :: ierr end subroutine ``` - `used_count`:最近一次接触力评估中使用 BVH active 候选缓存施力的 slave facet 数。 - `overflow_count`:active 候选数超过固定缓存容量并回退到旧 BVH 遍历施力路径的 slave facet 数。 Restart 说明: - restart 文件格式从 V4.3 起写出为 `FEMLITE_RESTART 2`。 - v2 在 DOF、单元状态和高斯点状态之后追加 `CONTACT_HISTORY` 段,用于保存 mortar 积分点摩擦历史槽。 - 读入端兼容旧的 v1 文件;若旧文件没有 `CONTACT_HISTORY` 段,则读入时清空当前接触历史。 V5.7 cohesive 生产模块当前提供 Fortran 内部接口,尚未新增 C ABI 包装: ```fortran subroutine cohesive_params_init(kn, kt, tn0, tt0, gi, gii, eta, & comp_factor, params, ierr) subroutine cohesive_trial_update(params, opening, slip, old_damage, & old_max_eff, traction_n, traction_t, & tangent_n, tangent_t, new_damage, & new_max_eff, dissipated, status, ierr) subroutine cohesive_state_store_trial(pair, selem, sface, melem, mface, & point_id, damage, max_opening, & max_effective, energy_delta, status, & ierr) subroutine cohesive_state_write(unit_id, ios) subroutine cohesive_state_read(unit_id, count_in, ierr) subroutine cohesive_metrics_add(state, status, damage, opening, effective, & area, cohesive_energy, elastic_energy, ierr) ``` `cohesive_trial_update` 的状态码为 `OPEN=0`、`BONDED=1`、`DAMAGING=2`、 `FAILED=3`、`COMPRESS=4`。`energy_delta` 必须为非负耗散增量;state 层会将 damage、最大开口、最大有效分离和能量做不可逆累计。独立 cohesive state restart 段的文本头为 `COHESIVE_STATE count`,随后逐槽写出 pair/slave/master 索引、point id、status、damage、maximum opening、maximum effective separation、 energy 和 trial energy。主 `femlite` restart 文件尚未接入 cohesive state 段; 当前 V5.7 单点验收通过模块级 write/read 验证 restart 语义。 V5.8 颗粒生产模块当前提供 Fortran 内部接口,尚未新增 C ABI 包装: ```fortran subroutine particle_add(ext_id, position, velocity, radius, mass, slot, ierr) subroutine particle_kinetic_energy(energy, ierr) subroutine particle_momentum(momentum, total_mass, ierr) subroutine particle_contact_init(kn, cn, kt, mu, kwall, cwall, params, ierr) subroutine pstep_advance(ctrl, params, walls, nwall, diag, ierr) subroutine pstep_diag_values(diag, dt, mass_before, mass_after, & momentum_before, momentum_after, & kinetic_before, kinetic_after, & dissipated_energy, max_overlap, ierr) subroutine pfacet_step_cloud(nparticle, slots, nfacet, max_nodes, & facet_nnode, coords, velocities, params, & node_loads, stats, ierr) subroutine pfacet_step_summary(stats, particle_count, contact_count, & max_overlap, total_energy, total_power, & force_norm, ierr) subroutine particle_fem_apply_all(params, clear_particle_forces, stats, ierr) subroutine particle_fem_stats_summary(stats, particle_count, contact_count, & max_overlap, total_energy, total_power, & force_norm, ierr) subroutine particle_fem_stats_force_norms(stats, particle_force_norm, & node_force_norm, ierr) subroutine pfacet_force_balance(nnode, node_forces, particle_force, & residual, ierr) ``` `pstep_diag_values` 使用 `particle_step_diag%dissipated_power * dt` 输出单步 `dissipated_energy`;质量、动量和动能分别来自 step 前后状态。facet coupling 路径的总质量、动量和动能通过 `particle_momentum` 与 `particle_kinetic_energy` 查询,节点载荷平衡通过 `pfacet_force_balance` 查询。`test_particle_acceptance` 覆盖这些 Fortran 输出路径。`particle_fem_apply_all` 从当前 FEM 边界 facet 收集坐标/速度,计算所有激活颗粒的 facet 接触,按节点写回 `fsph`,并返回 contact count、最大重叠、能量、耗散功率和力范数统计。 V5.8 dynamic grain container benchmark 工具命令行: ```text dynamic_grain_container_benchmark INPUT.inp OUTPUT_DIR ``` `INPUT.inp` 使用 benchmark 专用控制块: ```inp *DYNAMIC GRAIN CONTAINER structure_file, steps, dt, gx, gy, gz, damping, search_gap, probe_node *PARTICLE CONTACT kn, cn, kt, mu, kwall, cwall *PARTICLES id, x, y, z, vx, vy, vz, radius, mass ``` 工具输出 `grain_container_history.csv` 和 `grain_container_summary.csv`。该 benchmark 输入格式服务于 `examples/` 验收,不是主 `femlite` 应用程序的通用 INP keyword。 第三版当前 contact pair 支持两种配置方式: 1. INP 文件中的 FemLite 子集: ```inp *CONTACT PAIR, SLAVE=slave_target, MASTER=master_target, PENALTY=value, DAMPING=value, SEARCH=value, FRICTION=value, FRICTION_REGULARIZATION=value, AUGMENT=value ``` - header 式写法中,`SLAVE`、`MASTER` 和 `PENALTY` 为必填参数。 - `DAMPING`、`SEARCH`、`FRICTION`、`FRICTION_REGULARIZATION` 和 `AUGMENT` 为可选参数,未给出时默认为 0。 - `SLAVE` 和 `MASTER` 可为 surface 名称、elset 名称、element id 字符串或 `ALL`。 - 解析器接受大小写混用、参数等号两侧空格以及单/双引号包裹的名称。 也支持 Abaqus 常见的数据行式 contact pair 子集: ```inp *SURFACE, NAME=slave_surface, TYPE=ELEMENT slave_elset_or_element, face_label *SURFACE, NAME=master_surface, TYPE=ELEMENT master_elset_or_element, face_label *CONTACT PAIR, PENALTY=value, DAMPING=value, SEARCH=value, FRICTION=value, FRICTION_REGULARIZATION=value slave_surface, master_surface ``` - `*SURFACE` 当前支持 `TYPE=ELEMENT`、`TYPE=NODE` 和 analytical rigid `PLANE` 子集;`TYPE` 可省略,缺省为 `ELEMENT`。 - `OP` 可省略或写为 `ADD` / `NEW`:省略时按 `ADD` 处理;同名 surface 的 `ADD` 会追加数据行,`NEW` 会清除该 surface 已有数据行后重新定义。 - surface 可包含多条数据行;每行第一个字段可为 elset 名称或 element id,二者可在同一 surface 中混用。 - 第二字段 `face_label` 可省略;省略、`ALL` 或 `EXTERIOR` 表示该 target 的所有候选 facet 均可匹配。 - 当前支持 `S1`、`S2` 等面号标签,以及 `F1`、`FACE1` 等等价写法;壳单元支持 `SPOS`/`SNEG` 匹配其当前单一 shell facet。 - `SPOS`/`SNEG` 已参与接触计算语义:master surface 的 `SNEG` 会翻转有效接触法向;slave surface 若显式给出 `SPOS`/`SNEG`,候选接触只接受该侧法向朝向 master facet 的组合。 - 更完整的 Abaqus surface 变体、曲线/球/柱 analytical surface 和更复杂的数据行变体仍列入后续版本。 - 数据行式 `*CONTACT PAIR` 的 header 中仍要求 `PENALTY`,slave/master 从下一行读取。 2. Fortran95 核心数据库接口: ```fortran subroutine database_allocate_surfaces(num_surfaces, num_items, ierr) integer, intent(in) :: num_surfaces integer, intent(in) :: num_items integer, intent(out) :: ierr end subroutine subroutine database_allocate_contact_pair(num_pairs, ierr) integer, intent(in) :: num_pairs integer, intent(out) :: ierr end subroutine ``` 配置数组包括: - `surface_name(surface)`:surface 名称。 - `surface_start(surface)`、`surface_count(surface)`:surface 数据行在 item 表中的起始位置和数量;当同名 surface 经过 `OP=ADD` 非连续追加时,`surface_count` 表示有效 item 数量。 - `surface_owner(item)`:surface item 所属 surface 编号;为 0 表示该 item 已被 `OP=NEW` 覆盖失效。 - `surface_target(item)`:surface 数据行的 elset 名称或 element id 字符串。 - `surface_face(item)`:surface 数据行的 face label,用于实际接触候选 facet 筛选。 - `contact_pair_slave(pair)`:slave 接触目标,可为 surface 名称、elset 名称、element id 字符串或 `ALL`。 - `contact_pair_master(pair)`:master 接触目标,可为 surface 名称、elset 名称、element id 字符串或 `ALL`。 - `contact_pair_penalty(pair)`:法向 penalty 刚度,必须大于 0。 - `contact_pair_damping(pair)`:法向阻尼,必须非负。 - `contact_pair_search(pair)`:搜索距离,0 表示只按 facet 等效半径过滤。 - `contact_pair_friction(pair)`:Coulomb 摩擦系数,必须非负;0 表示无摩擦。 - `contact_pair_friction_reg(pair)`:摩擦正则化滑移尺度,必须非负;0 表示经典 Coulomb 截断。 - `contact_pair_aug_factor(pair)`:augmented penalty 更新系数,必须非负;0 表示仅使用 penalty。 当前 contact pair 支持投影裁剪 mortar 形函数积分、多 master facet 面积上限修正、Coulomb 粘滑历史、均匀空间网格候选搜索、OpenMP BVH 宽相搜索和 facet 空间 broad-phase 精筛。 接触统计包括: - `contact_active_count`:最近一次接触力评估中的激活贡献数。 - `contact_work_step`:最近一次接触力评估的接触功估计。 - `contact_work_total`:累计接触功估计。 - `contact_max_penetration`:最近一次接触力评估的最大穿透量。 - `contact_force_norm`:最近一次接触力评估的接触力范数累加。 逐 contact pair 统计保存在 `contact_pair_active/work/max_penetration/force_norm`、`contact_pair_status/activation_count/release_count/gap_residual/aug_lambda`、`contact_pair_stick_count/slip_count/slip/tangent_force`、`contact_pair_friction_work/fric_work_total` 数组中,并写入 `contact_XXXXXXXX.csv`。V4.4 起,contact CSV 的 `SUMMARY` 行写出 `search_facets/search_masters/search_candidates/search_active/search_bvh_nodes` 全局搜索统计、`search_cache_used/search_cache_overflow` 缓存统计,以及 `search_cpu_time/contact_force_cpu_time/contact_tangent_cpu_time` 计时统计;逐 `PAIR` 行通过内部 Fortran 查询 `contact_get_pair_stats` 写出对应接触对的搜索、缓存和计时统计。当前 C ABI 只暴露全局 search/perf/cache 统计,pair 级查询先作为 Fortran 内部接口和 CSV 输出提供。 ## 13. 输出控制接口 ```fortran subroutine fem_set_output_directory(path, ierr) character(len=*), intent(in) :: path integer, intent(out) :: ierr end subroutine subroutine fem_set_output_interval(interval, ierr) integer, intent(in) :: interval integer, intent(out) :: ierr end subroutine subroutine fem_write_output(step, time, ierr) integer, intent(in) :: step real(rk), intent(in) :: time integer, intent(out) :: ierr end subroutine ``` 说明: - 第一版输出 CSV 和日志。 - 第二版扩展 VTK 和 restart。 - 第三版扩展静力收敛历史、反力和接触结果输出。 - 外部程序可关闭自动输出并显式调用 `fem_write_output`。 ## 14. 版本与错误查询接口 ### 14.1 版本查询 ```fortran subroutine fem_get_version(major, minor, patch, ierr) integer, intent(out) :: major integer, intent(out) :: minor integer, intent(out) :: patch integer, intent(out) :: ierr end subroutine ``` ### 14.2 错误查询 ```fortran subroutine fem_get_last_error(code, message, ierr) integer, intent(out) :: code character(len=*), intent(out) :: message integer, intent(out) :: ierr end subroutine ``` 错误返回规则: - `ierr = 0` 表示成功。 - `ierr > 0` 表示错误。 - warning 只写日志,不作为 ierr 返回。 - 发生错误后,`fem_get_last_error` 可返回最近一次错误码和错误信息。 错误码分组: ```text 0 success 1000 input errors 2000 mesh and dof errors 3000 material and state errors 4000 solver errors 5000 coupling errors 6000 output errors 9000 internal errors ``` ## 15. 单位制约定 FemLite 不进行单位转换。 调用者必须保证以下数据采用一致单位制: - Abaqus inp 几何尺寸 - 材料密度 - 弹性和塑性参数 - 时间步长 - 节点力 - 压力 - 剪切牵引 - SPH 传入数据 - 输出解释 日志中应记录单位制不检查的提示。 ## 16. 第一版典型调用流程 ### 16.1 独立 FEM 程序流程 ```text fem_initialize fem_read_inp fem_build_model fem_compute_lumped_mass loop: fem_estimate_stable_dt fem_advance_explicit fem_write_output fem_finalize ``` ### 16.2 SPH 驱动流程 ```text fem_initialize fem_read_inp fem_build_model fem_compute_lumped_mass loop: fem_get_boundary_facet_count allocate external arrays if needed fem_get_boundary_facets SPH computes pressure, shear or nodal force fem_clear_sph_forces fem_apply_sph_facet_pressure / fem_apply_sph_facet_tractions / fem_apply_sph_nodal_forces fem_advance_explicit(dt) fem_get_nodal_kinematics if needed fem_finalize ``` ## 17. C/C++/Python 包装层规划 第二版提供: - C ABI 包装层。 - Python 调试接口。 - 面向 C/C++ 的扁平化数组接口。 包装层原则: - 不改变 Fortran95 原生接口的物理含义。 - 不改变压力、剪切、编号和单位制约定。 - 对三维数组接口提供扁平化视图。 - 包装层单独测试,不污染 FEM 核心。 第三版包装层扩展: - C ABI 暴露静力求解、反力查询和收敛状态查询。 - Python 调试接口支持运行静力算例并导出关键位移、反力和残差历史。 第四版包装层扩展: - C ABI 追加 `femlite_get_contact_diagnostics`,返回 active pair 数、activated/maintained/released pair 数、最大 gap residual 和最大 augmented penalty 乘子。 - C ABI 追加 `femlite_get_contact_friction_summary`,返回摩擦 step/total 功和最大累计滑移。 - C ABI 追加 `femlite_get_contact_history_stats`,返回 mortar 积分点摩擦历史槽数量、单槽最大累计滑移、单槽最大累计摩擦功和单槽最大切向力模长。 - C ABI 追加 `femlite_get_contact_search_stats`,返回 contact pair 搜索 facet/master/candidate/active/BVH 节点统计。 - C ABI 追加 `femlite_get_contact_perf_stats`,返回 contact search/force/tangent CPU 时间统计。 - C ABI 追加 `femlite_get_contact_cache_stats`,返回 BVH 候选缓存使用和溢出统计。 - C ABI 暴露 `femlite_get_convergence_status`,其中 `converged` 使用 `int` 返回 0/1。 - C ABI 暴露 `femlite_get_convergence_metrics`,返回相对力残差、contact gap residual 和 combined norm。 - C ABI 暴露 `femlite_get_convergence_diagnostics`,返回 cutback 次数、最后步长、最后有效时间、收敛状态码和失败原因码。 - C ABI 暴露 `femlite_set_linear_solver`、`femlite_get_linear_solver_settings`、 `femlite_get_linear_solver_stats` 和 `femlite_get_linear_solver_diagnostics`, 返回/设置值与 Fortran API 常量一致。 - 上述函数只追加新符号,不改变 `femlite_get_contact_summary` 的签名和含义。