# Thick Plate Pressure Benchmark This folder contains a FemLite NAFEMS LE10 thick-plate pressure benchmark based on `models.sme.thick_plate.pdf`. - `thick_plate_le10.inp`: generated C3D20 quarter-model benchmark deck. - `generate_thick_plate_le10.py`: regenerates the benchmark deck. - `check_thick_plate_results.py`: runs FemLite and checks the D-point stress. - `run_case.bat`: convenience runner for the generated deck. The PDF benchmark is a quarter elliptical thick plate with an elliptical hole: - Inner ellipse semiaxes: a = 2.0 m, b = 1.0 m. - Outer ellipse semiaxes: a = 3.25 m, b = 2.75 m. - Thickness: 0.6 m, with two elements through thickness. - Material: E = 210 GPa, nu = 0.3, density = 7850 kg/m3. - Load: 1 MPa on the top surface in the negative z direction. - Constraints: symmetry on x = 0 and y = 0, outer ellipse fixed in x and y, and the outer-ellipse midplane edge fixed in z. The generated FemLite deck uses 128 C3D20 elements. Because FemLite CSV output stores element-average stresses, the checker recovers the C3D20 small-strain stress directly from the solved displacement field at point D `(2, 0, 0.6)`. Reference comparison: | Quantity at D | Reference | Value | |---|---:|---:| | NAFEMS sigma_y | `models.sme.thick_plate.pdf` | -5.38 MPa | | COMSOL sigma_y | `models.sme.thick_plate.pdf` | -5.72 MPa | | FemLite recovered sigma_y | `thick_plate_le10.inp` | about -5.70 MPa | Run: ```bat run_case.bat ``` Results are written to `results\auto_run`. Regenerate: ```powershell Python\.venv\Scripts\python.exe examples\thick_plate\generate_thick_plate_le10.py ``` Check from the repository root: ```powershell Python\.venv\Scripts\python.exe examples\thick_plate\check_thick_plate_results.py . build-win-gcc-16\femlite.exe build-win-gcc-16\example_benchmark\thick_plate_le10 ```