# Roll Forming Benchmarks This folder contains the original roll-forming reference documents plus two compact FemLite V5 entries: - `roll_forming_friction_smoke.inp` - `roll_forming_kinematics_benchmark.inp` - `roll_forming_springback_benchmark.inp` `roll_forming_friction_smoke.inp` is the V4.8 executable mechanics smoke: a C3D8 workpiece compressed against a C3D8 roller surrogate with scaled elastic material properties, Coulomb friction, tangential forming load and contact output. `roll_forming_kinematics_benchmark.inp` is the V5.6 roller kinematics benchmark. It drives the production rigid-cylinder/roller modules with translation, down-feed and angular velocity, then compares tangential slip, regularized traction, friction energy, pressure and torque with and without roller spin. `roll_forming_springback_benchmark.inp` is the V5.6 plastic forming and springback benchmark. It drives the production roller kinematics, regularized traction, roll metrics and J2 small-strain material update on a compact through-thickness strip model. The benchmark forms the workpiece to a prescribed curvature, unloads by solving for zero resultant bending moment, and writes residual displacement, springback ratio and plastic-zone output. Reference checks for the current kinematics input: | Metric | Requirement | |---|---:| | Active samples | 6 | | Mean slip with spin | greater than 1.5 x no-spin slip | | Mean regularized traction with spin | greater than 1.1 x no-spin traction | | Max traction delta | greater than 50 | | Friction energy with spin | greater than no-spin energy | | Roller torque with spin | positive | Reference checks for the current springback input: | Metric | Requirement | |---|---:| | Material points | 81 | | Forming force | between `1.0e4` and `3.0e4` | | Plastic work | positive | | Plastic zone fraction | between `0.20` and `1.0` | | Springback ratio | between `0.05` and `0.95` | | Residual moment | below `1.0e-6` of peak moment scale | Run: ```bat run_case.bat ``` Results are written to: - `results\auto_run` for the friction smoke - `results\roller_kinematics` for the kinematics benchmark - `results\springback` for the plastic springback benchmark Springback reference outputs include `springback_history.csv`, `springback_summary.csv` and `plastic_zone.csv`. Current reference values are springback ratio `0.473154068`, residual displacement `0.0316107559`, plastic work `1.11591736e-05`, active plastic points `56/81` and residual moment `8.92778801e-11` in absolute value.