Files
FemLite/tests/unit/test_material_mc_driver.f90
2026-06-26 00:48:57 +08:00

403 lines
14 KiB
Fortran

program test_material_mc_driver
use fem_precision
use fem_error
use fem_database
use fem_material_mohr_coulomb
use fem_material_mc_driver
implicit none
real(rk), parameter :: E_TEST = 1000.0_rk
real(rk), parameter :: NU_TEST = 0.25_rk
real(rk), parameter :: C_TEST = 10.0_rk
real(rk), parameter :: T_TEST = 2.0_rk
real(rk), parameter :: TOL = 1.0e-8_rk
real(rk) :: phi
real(rk) :: psi
integer :: ierr
phi = 30.0_rk * acos(-ONE) / 180.0_rk
psi = 5.0_rk * acos(-ONE) / 180.0_rk
call setup_mc(phi, psi, ONE, ierr)
call require_success(ierr, 1)
call check_options()
call check_elastic_driver()
call check_shear_driver()
call check_tension_driver()
call check_path_merge()
call check_triaxial_path()
call check_tension_path()
call check_point_eval()
call check_limited_status()
call check_error_paths()
call database_finalize(ierr)
call require_success(ierr, 2)
contains
subroutine setup_mc(phi_in, psi_in, factor, ierr)
real(rk), intent(in) :: phi_in
real(rk), intent(in) :: psi_in
real(rk), intent(in) :: factor
integer, intent(out) :: ierr
call database_allocate_model(1, 1, 0, 0, 0, 0, 1, 0, 0, &
0, 0, 0, 0, 0, ierr)
if (ierr .ne. FEM_SUCCESS) return
mat_name(1) = 'SOIL'
mat_plastic_model(1) = 'MOHR_COULOMB'
mat_density(1) = 1800.0_rk
mat_e(1) = E_TEST
mat_nu(1) = NU_TEST
mat_mc_phi(1) = phi_in
mat_mc_cohesion(1) = C_TEST
mat_mc_dilation(1) = psi_in
mat_mc_tension(1) = T_TEST
mat_mc_res_phi(1) = ZERO
mat_mc_res_cohesion(1) = ZERO
mat_mc_res_dilation(1) = ZERO
mat_mc_reduction(1) = factor
ierr = FEM_SUCCESS
end subroutine setup_mc
subroutine check_options()
type(mc_driver_options) :: options
integer :: ierr_local
call mc_driver_options_init(options)
call mc_driver_options_valid(options, ierr_local)
call require_success(ierr_local, 10)
if (options%max_substeps .lt. options%min_substeps) call fail(11)
if (options%target_strain .le. ZERO) call fail(12)
if (trim(mc_driver_branch_name(MC_BRANCH_ELASTIC)) .ne. 'ELASTIC') &
call fail(13)
if (trim(mc_driver_branch_name(MC_BRANCH_SHEAR)) .ne. 'SHEAR') &
call fail(14)
if (trim(mc_driver_branch_name(MC_BRANCH_TENSION)) .ne. 'TENSION') &
call fail(15)
if (trim(mc_driver_branch_name(MC_BRANCH_MIXED)) .ne. 'MIXED') &
call fail(16)
if (trim(mc_driver_status_name(MC_DRV_OK)) .ne. 'OK') call fail(17)
if (trim(mc_driver_status_name(MC_DRV_LIMITED)) .ne. 'LIMITED') &
call fail(18)
end subroutine check_options
subroutine check_elastic_driver()
type(mc_driver_options) :: options
type(mc_driver_diag) :: diag
real(rk) :: deps(NSTRESS)
real(rk) :: stress_old(NSTRESS)
real(rk) :: stress_new(NSTRESS)
real(rk) :: state_old(NSTATEV_MAX)
real(rk) :: state_new(NSTATEV_MAX)
integer :: ierr_local
integer :: substeps
integer :: branch
integer :: status
real(rk) :: max_yield
real(rk) :: plastic_total
real(rk) :: work_total
call mc_driver_options_init(options)
options%target_strain = 1.0e-3_rk
deps = ZERO
deps(1) = -1.0e-4_rk
deps(2) = -1.0e-4_rk
deps(3) = -1.0e-4_rk
stress_old = ZERO
state_old = ZERO
call mc_driver_update(1, deps, 0.1_rk, state_old, stress_old, options, &
stress_new, state_new, diag, ierr_local)
call require_success(ierr_local, 30)
if (diag%substeps .ne. 1) call fail(31)
if (diag%final_branch .ne. MC_BRANCH_ELASTIC) call fail(32)
if (diag%branch_count(MC_BRANCH_ELASTIC) .ne. 1) call fail(33)
if (state_new(1) .gt. TOL) call fail(34)
if (stress_new(1) .ge. ZERO .or. stress_new(2) .ge. ZERO) call fail(35)
if (diag%tangent_trace .le. ZERO) call fail(36)
call mc_driver_summary(diag, substeps, branch, max_yield, plastic_total, &
work_total, status, ierr_local)
call require_success(ierr_local, 37)
if (substeps .ne. 1 .or. branch .ne. MC_BRANCH_ELASTIC) call fail(38)
if (status .ne. MC_DRV_OK) call fail(39)
if (plastic_total .gt. TOL) call fail(40)
if (work_total .le. ZERO) call fail(41)
if (max_yield .gt. TOL) call fail(42)
end subroutine check_elastic_driver
subroutine check_shear_driver()
type(mc_driver_options) :: options
type(mc_driver_diag) :: diag
real(rk) :: deps(NSTRESS)
real(rk) :: stress_old(NSTRESS)
real(rk) :: stress_new(NSTRESS)
real(rk) :: state_old(NSTATEV_MAX)
real(rk) :: state_new(NSTATEV_MAX)
real(rk) :: yield_norm
integer :: branch
integer :: ierr_local
call mc_driver_options_init(options)
options%target_strain = 2.0e-3_rk
options%min_substeps = 12
options%max_substeps = 80
deps = ZERO
stress_old = ZERO
stress_old(1) = -10.0_rk
stress_old(2) = -10.0_rk
stress_old(3) = -80.0_rk
state_old = ZERO
call mc_driver_update(1, deps, 1.0_rk, state_old, stress_old, options, &
stress_new, state_new, diag, ierr_local)
call require_success(ierr_local, 60)
if (diag%substeps .lt. 10) call fail(61)
if (diag%branch_count(MC_BRANCH_SHEAR) + &
diag%branch_count(MC_BRANCH_MIXED) .lt. 1) call fail(62)
if (diag%plastic_total .le. ZERO) call fail(63)
if (diag%max_plastic_step .le. ZERO) call fail(64)
if (stress_new(3) .le. stress_old(3)) call fail(65)
call mc_driver_yield_norm(1, stress_new, yield_norm, branch, ierr_local)
call require_success(ierr_local, 66)
if (yield_norm .gt. max(1.0e-5_rk, 100.0_rk * options%yield_tolerance)) &
call fail(67)
if (branch .ne. MC_BRANCH_ELASTIC .and. branch .ne. MC_BRANCH_SHEAR) &
call fail(68)
end subroutine check_shear_driver
subroutine check_tension_driver()
type(mc_driver_options) :: options
type(mc_driver_diag) :: diag
real(rk) :: deps(NSTRESS)
real(rk) :: stress_old(NSTRESS)
real(rk) :: stress_new(NSTRESS)
real(rk) :: state_old(NSTATEV_MAX)
real(rk) :: state_new(NSTATEV_MAX)
real(rk) :: principal(3)
real(rk) :: vectors(3,3)
integer :: ierr_local
call mc_driver_options_init(options)
options%target_strain = 1.0e-3_rk
options%max_substeps = 80
deps = ZERO
deps(1) = 0.03_rk
stress_old = ZERO
state_old = ZERO
call mc_driver_update(1, deps, 1.0_rk, state_old, stress_old, options, &
stress_new, state_new, diag, ierr_local)
call require_success(ierr_local, 80)
if (diag%branch_count(MC_BRANCH_TENSION) .lt. 1 .and. &
diag%branch_count(MC_BRANCH_MIXED) .lt. 1) call fail(81)
if (diag%plastic_total .le. ZERO) call fail(82)
call material_mc_principal(stress_new, principal, vectors, ierr_local)
call require_success(ierr_local, 83)
if (principal(1) - T_TEST .gt. 1.0e-7_rk) call fail(84)
if (state_new(1) .le. ZERO) call fail(85)
end subroutine check_tension_driver
subroutine check_path_merge()
type(mc_driver_options) :: options
type(mc_driver_diag) :: diag
real(rk) :: deps_hist(NSTRESS,4)
real(rk) :: dt_hist(4)
real(rk) :: stress_old(NSTRESS)
real(rk) :: state_old(NSTATEV_MAX)
real(rk) :: stress_hist(NSTRESS,4)
integer :: branch_hist(4)
integer :: ierr_local
call mc_driver_options_init(options)
options%target_strain = 2.0e-3_rk
options%max_substeps = 80
deps_hist = ZERO
deps_hist(3,1) = -0.01_rk
deps_hist(3,2) = -0.01_rk
deps_hist(1,3) = 0.015_rk
deps_hist(4,4) = 0.02_rk
dt_hist = 0.25_rk
stress_old = ZERO
stress_old(1) = -8.0_rk
stress_old(2) = -8.0_rk
stress_old(3) = -8.0_rk
state_old = ZERO
call mc_driver_path(1, 4, deps_hist, dt_hist, state_old, stress_old, &
options, stress_hist, branch_hist, diag, ierr_local)
call require_success(ierr_local, 100)
if (diag%substeps .lt. 10) call fail(101)
if (diag%plastic_total .le. ZERO) call fail(102)
if (branch_hist(4) .lt. MC_BRANCH_ELASTIC .or. &
branch_hist(4) .gt. MC_BRANCH_MIXED) call fail(103)
if (maxval(abs(stress_hist(:,4))) .le. ZERO) call fail(104)
if (abs(diag%work_total) .le. TOL) call fail(105)
end subroutine check_path_merge
subroutine check_triaxial_path()
type(mc_driver_options) :: options
type(mc_driver_diag) :: diag
real(rk) :: stress_hist(NSTRESS,6)
integer :: branch_hist(6)
integer :: ierr_local
call mc_driver_options_init(options)
options%target_strain = 1.5e-3_rk
options%max_substeps = 200
call mc_driver_triaxial(1, -0.20_rk, 5.0_rk, 6, options, stress_hist, &
branch_hist, diag, ierr_local)
call require_success(ierr_local, 120)
if (diag%substeps .lt. 30) call fail(121)
if (stress_hist(3,6) .ge. stress_hist(1,6)) call fail(122)
if (diag%branch_count(MC_BRANCH_ELASTIC) .lt. 1) call fail(123)
if (diag%plastic_total .lt. ZERO) call fail(124)
if (branch_hist(6) .lt. MC_BRANCH_ELASTIC .or. &
branch_hist(6) .gt. MC_BRANCH_MIXED) call fail(125)
end subroutine check_triaxial_path
subroutine check_tension_path()
type(mc_driver_options) :: options
type(mc_driver_diag) :: diag
real(rk) :: stress_hist(NSTRESS,5)
integer :: branch_hist(5)
real(rk) :: principal(3)
real(rk) :: vectors(3,3)
integer :: ierr_local
call mc_driver_options_init(options)
options%target_strain = 1.0e-3_rk
options%max_substeps = 80
call mc_driver_tension(1, 0.04_rk, 5, options, stress_hist, branch_hist, &
diag, ierr_local)
call require_success(ierr_local, 140)
if (diag%branch_count(MC_BRANCH_TENSION) .lt. 1 .and. &
diag%branch_count(MC_BRANCH_MIXED) .lt. 1) call fail(141)
call material_mc_principal(stress_hist(:,5), principal, vectors, &
ierr_local)
call require_success(ierr_local, 142)
if (principal(1) - T_TEST .gt. 1.0e-7_rk) call fail(143)
if (diag%plastic_total .le. ZERO) call fail(144)
if (branch_hist(5) .ne. MC_BRANCH_TENSION .and. &
branch_hist(5) .ne. MC_BRANCH_MIXED .and. &
branch_hist(5) .ne. MC_BRANCH_ELASTIC) call fail(145)
end subroutine check_tension_path
subroutine check_point_eval()
type(mc_driver_point) :: point
real(rk) :: stress(NSTRESS)
real(rk) :: state(NSTATEV_MAX)
real(rk) :: yield_norm
integer :: branch
integer :: ierr_local
stress = ZERO
stress(1) = -5.0_rk
stress(2) = -20.0_rk
stress(3) = -50.0_rk
state = ZERO
call mc_driver_point_eval(1, stress, state, point, ierr_local)
call require_success(ierr_local, 160)
if (point%branch .ne. MC_BRANCH_SHEAR) call fail(161)
if (point%shear_f .le. ZERO) call fail(162)
if (point%principal(1) .lt. point%principal(2)) call fail(163)
call mc_driver_yield_norm(1, stress, yield_norm, branch, ierr_local)
call require_success(ierr_local, 164)
if (branch .ne. MC_BRANCH_SHEAR) call fail(165)
if (yield_norm .le. ZERO) call fail(166)
end subroutine check_point_eval
subroutine check_limited_status()
type(mc_driver_options) :: options
type(mc_driver_diag) :: diag
real(rk) :: deps(NSTRESS)
real(rk) :: stress_old(NSTRESS)
real(rk) :: stress_new(NSTRESS)
real(rk) :: state_old(NSTATEV_MAX)
real(rk) :: state_new(NSTATEV_MAX)
integer :: ierr_local
call mc_driver_options_init(options)
options%target_strain = 1.0e-5_rk
options%max_substeps = 3
deps = ZERO
deps(3) = -0.02_rk
stress_old = ZERO
state_old = ZERO
call mc_driver_update(1, deps, 1.0_rk, state_old, stress_old, options, &
stress_new, state_new, diag, ierr_local)
call require_success(ierr_local, 180)
if (diag%status .ne. MC_DRV_LIMITED) call fail(181)
if (diag%requested_steps .le. options%max_substeps) call fail(182)
if (diag%limited_steps .ne. 1) call fail(183)
if (trim(mc_driver_status_name(diag%status)) .ne. 'LIMITED') call fail(184)
end subroutine check_limited_status
subroutine check_error_paths()
type(mc_driver_options) :: options
type(mc_driver_diag) :: diag
type(mc_driver_diag) :: left
type(mc_driver_diag) :: right
type(mc_driver_diag) :: merged
real(rk) :: deps(NSTRESS)
real(rk) :: stress_old(NSTRESS)
real(rk) :: stress_new(NSTRESS)
real(rk) :: state_old(NSTATEV_MAX)
real(rk) :: state_new(NSTATEV_MAX)
real(rk) :: stress_hist(NSTRESS,1)
integer :: branch_hist(1)
integer :: ierr_local
call mc_driver_options_init(options)
options%max_substeps = 0
call mc_driver_options_valid(options, ierr_local)
if (ierr_local .eq. FEM_SUCCESS) call fail(200)
call mc_driver_options_init(options)
options%target_strain = -ONE
call mc_driver_options_valid(options, ierr_local)
if (ierr_local .eq. FEM_SUCCESS) call fail(201)
call mc_driver_options_init(options)
options%cutback_factor = ONE
call mc_driver_options_valid(options, ierr_local)
if (ierr_local .eq. FEM_SUCCESS) call fail(202)
call mc_driver_options_init(options)
deps = ZERO
stress_old = ZERO
state_old = ZERO
call mc_driver_update(2, deps, ZERO, state_old, stress_old, options, &
stress_new, state_new, diag, ierr_local)
if (ierr_local .eq. FEM_SUCCESS) call fail(203)
call mc_driver_triaxial(1, -0.01_rk, -ONE, 1, options, stress_hist, &
branch_hist, diag, ierr_local)
if (ierr_local .eq. FEM_SUCCESS) call fail(204)
call mc_driver_diag_reset(left)
call mc_driver_diag_reset(right)
left%status = MC_DRV_INVALID
call mc_driver_merge_diag(left, right, merged, ierr_local)
if (ierr_local .eq. FEM_SUCCESS) call fail(205)
end subroutine check_error_paths
subroutine require_success(ierr, code)
integer, intent(in) :: ierr
integer, intent(in) :: code
if (ierr .ne. FEM_SUCCESS) call fail(code)
end subroutine require_success
subroutine fail(code)
integer, intent(in) :: code
write(*,*) 'test_material_mc_driver failed:', code
stop 1
end subroutine fail
end program test_material_mc_driver