82 KiB
82 KiB
FemLite V5 Remaining TODO
Status date: 2026-06-27
This file is the executable TODO list for the current 0.5.x development cycle.
The phase status table is maintained only in docs/v5_development_plan.md.
Rules for closing an item:
- Completed task headings use
[x]; open task headings use[ ]. - Code must be implemented in production modules, not benchmark-only helpers in
src. - Tests must be automated through CTest or a documented extended test command.
- Examples must live under
examples/, one folder per case, with README, input, double-click run script and a check script when the case is used for acceptance. - Documentation must describe the algorithm, interface, user behavior and developer maintenance path.
- Large generated result files must not be committed.
V5.2 Dependency-Free Sparse Solver Hardening
Boundary for this module:
- Do not add third-party solver libraries.
- Do not introduce an external solver process as a required or accepted production backend.
- Do not expose third-party or external solver method/backend interfaces through the Fortran API, C ABI, CMake options or helper tools.
- Legacy external solver numeric values must be rejected as invalid configuration and must leave the active internal solver settings unchanged.
[x] DONE V5.2-1: Harden internal sparse solver workflows
- Implementation:
- Keep CG, BiCGSTAB, GMRES and the internal dense pivoting fallback as the production solver family.
- Reject legacy external solver method/backend ids at the configuration boundary with no fallback solve and no state mutation.
- Record method, preconditioner, iteration count, residual, matrix class and failure status for every static and implicit solve.
- Reuse the existing CSR diagnostics to classify SPD, structurally symmetric and nonsymmetric systems before dispatch.
- Tests:
- Add or extend CTest coverage for SPD CG, nonsymmetric BiCGSTAB, nonsymmetric GMRES and dense pivoting matrices.
- Add structural workflow checks for linear static, implicit Newmark and one nonlinear/contact correction path using internal solvers.
- Add a C ABI check that the legacy external solver method value is rejected and does not change solver settings.
- Acceptance:
- Default builds have no third-party solver dependency.
- No external solver constants, C ABI prototypes, CMake targets or helper tools remain in the module.
- Static, implicit and nonlinear/contact paths solve through internal dispatch and report diagnostics.
- Legacy external solver selection never silently falls back to an internal solve.
- Completion evidence:
linear_solver_solverecords CSR matrix class, initial residual, final residual, relative residual, method, preconditioner, iteration and status.linear_solver_cg,solver_implicit,implicit_inpandc_apicover the internal diagnostic path and legacy external method rejection.linear_solver_cgnow also covers the internal dense pivoting solve on an indefinite matrix;solver_implicitcovers a nonlinear correction path that restores user settings after an automatic CG-to-GMRES fallback.
[x] DONE V5.2-2: Document no-external-solver policy
- Implementation:
- Update user, algorithm and developer documentation to state that the core module is dependency-free with respect to sparse solvers.
- Document the supported internal solver methods, preconditioners and diagnostics.
- Document that external solver interfaces have been removed and legacy external method values are invalid.
- Tests:
- Keep default CTest working without any optional solver package.
- Add source/documentation checks when practical to prevent reintroducing third-party solver build options.
- Acceptance:
- V5 planning and release documentation no longer list external solver enablement or adapter interfaces as current-version acceptance items.
- Completion evidence:
- User, algorithm, interface, test and developer documentation now describe the no-external-solver policy and the internal solver diagnostic fields.
V5.3 Mortar / Augmented Lagrangian Contact
[x] DONE V5.3-1: Promote two-block contact to nonmatching mortar benchmark
- Implementation:
examples/contact_two_blocks_compressionuses a nonmatching 4-facet lower master face against a 1-facet upper slave face.- The checker derives pressure profile, max gap, weighted gap, multiplier residual and augmented multiplier metrics from contact CSV output.
pressure_profile.csvis written in the result directory for benchmark inspection.
- Tests:
check_contact_results.pychecks active contact, master-facet coverage, pressure range, weighted penetration, multiplier residual, augmented multiplier growth and VTK output.- CTest
example_contact_two_blocks_compression_benchmarkruns the example and calls the check script throughtools/testing/run_example_smoke.py.
- Acceptance:
- The nonmatching pressure benchmark passes in the default Release CTest path.
- Example README documents the nonmatching mesh, reference metrics and limitations.
- Completion evidence:
ctest --test-dir build-win-gcc-16 -C Release -R example_contact_two_blocks_compression_benchmark --output-on-failurepassed on 2026-06-26.
[x] DONE V5.3-2: Promote sliding contact to large-sliding mortar-friction benchmark
- Implementation:
examples/contact_block_slidingnow uses a nonmatching 4-facet lower master surface and a 1-facet upper slave surface.- The upper block is force-driven over the master surface while normal augmented multiplier history and tangential stick/slip/friction-work output remain coupled through the production contact path.
- Restart continuity for contact friction and multiplier state is covered by
the module-level
restartCTest; the example benchmark focuses on the large-sliding friction trajectory.
- Tests:
check_contact_results.pywritessliding_profile.csvand checks multiple master facets, multiple active candidates, accumulated slip, stick/slip counters, tangential force, positive friction work and VTK output.- CTest
example_contact_block_sliding_benchmarkruns the full example and checker throughtools/testing/run_example_smoke.py. - Existing
contact_omp1,contact_omp4andperf_contact_pair_omp_consistencycontinue to cover OpenMP contact consistency at module/performance-smoke level.
- Acceptance:
- Stick/slip transitions are reported.
- Frictional work is nonnegative within tolerance.
- Restart continues multiplier and friction history without jumps in the module restart regression.
- Completion evidence:
ctest --test-dir build-win-gcc-16 -C Release -R example_contact_block_sliding_benchmark --output-on-failurepassed on 2026-06-26.
[x] DONE V5.3-3: Add shell/solid contact benchmark coverage
- Implementation:
- Added
examples/shell_shell_contactwith an S4-to-S4 contact benchmark. - Added
examples/shell_solid_contactwith an S4 slave surface contacting a C3D8 solid master face. - Both examples use the existing contact pair, mortar force/output and augmented multiplier paths; no special-case production path was added.
- Added
- Tests:
- Each example has a local checker that writes a compact profile CSV and checks active contact, force norm, gap residual, augmented multiplier, master search and VTK output.
- CTest entries
example_shell_shell_contact_benchmarkandexample_shell_solid_contact_benchmarkrun the examples and checkers.
- Acceptance:
- At least one shell-solid and one shell-shell contact case pass automated checks.
- Completion evidence:
ctest --test-dir build-win-gcc-16 -C Release -R "example_shell_(shell|solid)_contact_benchmark" --output-on-failurepassed on 2026-06-26.
V5.4 Mohr-Coulomb And Strength Reduction
[x] DONE V5.4-1: Finish material-point acceptance tests
- Implementation:
- Cover triaxial compression, triaxial extension, pure shear and tensile cutoff.
- Record active branch or return-map mode for each test.
- Tests:
- Add explicit tolerance checks for stress, plastic multiplier and branch id.
- Acceptance:
- All material-point tests pass without substep explosion.
- Tangent or algorithmic stiffness limitations are documented.
- Completion evidence:
test_material_mohr_coulombnow covers triaxial compression, triaxial extension, pure shear, tensile cutoff, mixed return, branch id, post-return yield tolerance and plastic increment checks.test_material_mc_driverandtest_material_mc_envelopecover path driver diagnostics, branch counts, limited status, tangent diagnostics, envelope margins, safety ratios and reduced material parameters.- Algorithm, detailed design, interface, test, user and developer documentation now describe the Mohr-Coulomb equations, input format, state variables, driver diagnostics and engineering tangent limitations.
- Targeted CTest command:
ctest --test-dir build-win-gcc-16 -C Release -R "material_mohr_coulomb|material_mc_driver|material_mc_envelope" --output-on-failure.
[x] DONE V5.4-2: Replace strengthReduction placeholder with MC benchmark
- Implementation:
- Update
examples/strengthReductionto use real Mohr-Coulomb material input. - Add strength reduction search controls and output safety-factor history.
- Output plastic zone and displacement control probe.
- Update
- Tests:
- Add check script for final safety factor range, bracket convergence and plastic-zone extent.
- Acceptance:
- Safety factor lies inside documented tolerance.
- Check script fails if the solve only runs linear elastic behavior.
- Completion evidence:
strength_reduction_slope_static.inpnow usesMC_SOILwith*MOHR COULOMBfriction, cohesion, dilation, tensile cutoff, residual parameters and reduction factor fields.tools/benchmarks/strength_reduction_benchmark.f90links the production core and calls the Mohr-Coulomb yield path plus strength-reduction driver/report modules to generate safety-factor history, summary, plastic-zone and displacement-probe files.check_strength_reduction_results.pyrejects the old elastic placeholder and checks converged safety factor, real stable/unstable bracket, plastic zone activation, displacement probe signs, VTK and node output.- CTest
example_strength_reduction_benchmarkpassed on 2026-06-26 withFS=1.21125, 8 trials, 3 stable trials, 5 unstable trials and 2 active plastic probes.
V5.5 Linear Buckling And Cyclic Symmetry
[x] DONE V5.5-1: Add analytic buckling verification
- Implementation:
- Add a small column or beam benchmark with known Euler critical load.
- Assemble prestress/geometric stiffness through the production path.
- Tests:
- Check first eigenvalue relative error.
- Acceptance:
- Relative error and mode normalization are documented.
- Completion evidence:
- Added
examples/euler_column_bucklingwith README, benchmark input, double-clickrun_case.batandcheck_buckling_results.py. - Added production
src/solver/fem_buckling_column.f90; it reads the Euler*BUCKLING COLUMNblock, assembles beam bending stiffness throughgeom_beam2d_column_stiffness, callsbuckling_dense_solve, compares againstbuckling_euler_column_loadand writes summary/mode CSV files. - Kept
tools/benchmarks/euler_column_buckling_benchmark.f90outsidesrcas a thin wrapper aroundbuckling_column_run_file; the old duplicate helper-side assembly/solve algorithm has been deleted. - Hardened
buckling_dense_solveso the internal dense Jacobi eigensolver iteration budget scales with problem size. examples/euler_column_buckling/run_case.batandcheck_buckling_results.pynow run the mainfemlite --bucklingworkflow.- CTest
example_euler_column_buckling_benchmarkpassed on 2026-06-27 with relative error3.27661E-05, residual1.50015E-11andphi^T K_G phi = 1.0.
- Added
[x] DONE V5.5-2: Upgrade corrugated shell benchmark
- Implementation:
- Replace static-only smoke with buckling eigenvalue analysis.
- Add cyclic sector model and full-model comparison when feasible.
- Write mode shape output through modal output path.
- Tests:
- Check critical load range and cyclic/full consistency.
- Acceptance:
- README documents eigenvalue, mode count, cyclic wave number and tolerance.
- Completion evidence:
- Added
tools/benchmarks/corrugated_shell_buckling_benchmark.f90outsidesrc; it builds a sixteen-sector reduced corrugated-shell periodic buckling model, calls productionbuckling_dense_solve, validates the selected wave throughfem_cyclic_symmetryand writes modal output throughmodal_write_csv. - Added
corrugated_shell_buckling_benchmark.inp,check_buckling_results.py, updatedrun_case.batand rewrote the example README with reference metrics and tolerances. - Replaced CTest
example_buckling_corrugated_shell_smokewithexample_buckling_corrugated_shell_benchmark. - CTest
example_buckling_corrugated_shell_benchmarkpassed on 2026-06-26 with selected wave 4 load453.031407, critical wave 8 load393.369677, cyclic/full relative error1.25473461E-16and modal residual1.31855319E-12. source_sizeCTest passed after the new benchmark tool was added.
- Added
V5.6 High-Fidelity Roll Forming
[x] DONE V5.6-1: Add real roller kinematics to contact workflow
- Implementation:
- Ensure rigid roller rotation contributes to relative tangential velocity.
- Couple roller translation, down-feed and angular velocity in input/control.
- Output roller force, torque, contact pressure band and friction work.
- Tests:
- Unit test roller kinematics and relative velocity sign.
- Example check for nonzero rolling traction and stable energy trend.
- Acceptance:
- Removing angular velocity changes tangential traction in the check case.
- Completion evidence:
- Added production
roller_regularized_tractiontofem_rigid_roller; it uses the same roller tangential velocity path and a smoothtanh(slip/reference_speed)friction factor so spin changes traction magnitude, not only slip speed. - Extended
test_rigid_rollerwith a spin/no-spin comparison that verifies angular speed changes slip and regularized traction. - Added
tools/benchmarks/roll_forming_kinematics_benchmark.f90outsidesrc; it drives production roller pose, schedule, contact kinematics, regularized traction and roll metrics to output roller history and summary. - Added
examples/roll_forming/roll_forming_kinematics_benchmark.inp,check_roller_kinematics.pyand updatedrun_case.bat/README. - CTest
example_roll_forming_kinematics_benchmarkpassed on 2026-06-26 with mean slip0.4with spin vs0.2without spin, mean traction289.208274with spin vs228.478247without spin, max traction delta60.7300272and positive roller torque14.4604137.
- Added production
[x] DONE V5.6-2: Add plastic forming and springback benchmark
- Implementation:
- Upgrade
examples/roll_formingto include plastic workpiece and unloading. - Output residual displacement, plastic zone and springback metric.
- Upgrade
- Tests:
- Check forming force range, positive plastic work and springback sign/range.
- Acceptance:
- Example is no longer only an elastic contact surrogate.
- Completion evidence:
- Added production roll metrics helpers for residual displacement and
springback ratio, with
test_rigid_rollercoverage. - Added
tools/benchmarks/roll_forming_springback_benchmark.f90outsidesrc; it drives production roller kinematics, regularized traction, roll metrics and J2 small-strain material updates on a compact multilayer workpiece section, then solves unloading release curvature by bending moment balance. - Added
examples/roll_forming/roll_forming_springback_benchmark.inpandcheck_springback_results.py;run_case.batnow runs the springback benchmark after the friction smoke and kinematics benchmark. - Targeted checker passed on 2026-06-26 with springback ratio
0.473154068, residual displacement0.0316107559, plastic work1.11591736e-05, 56/81 active plastic points and residual moment absolute value8.92778801e-11.
- Added production roll metrics helpers for residual displacement and
springback ratio, with
V5.7 Cohesive Adhesion / Decohesion
[x] DONE V5.7-1: Add cohesive single-point acceptance tests
- Implementation:
- Cover loading, unloading, mixed-mode damage and complete decohesion.
- Track damage, maximum opening, energy and status.
- Tests:
- Verify nonnegative dissipated energy and irreversible damage.
- Acceptance:
- Restarted state preserves damage and maximum opening.
- Completion evidence:
test_cohesive_contactnow drives one cohesive integration point through bonded loading, mixed-mode damage, unloading, reload and complete decohesion.- The path records damage, maximum opening, effective separation, dissipated
energy and status through
fem_cohesive_stateandfem_cohesive_metrics. - The test verifies nonnegative energy increments, irreversible damage, failed-state zero traction, failed-area metrics and restart preservation of damage, maximum opening, maximum effective separation, energy and status.
- Targeted command passed on 2026-06-26:
ctest --test-dir build-win-gcc-16 -C Release -R "cohesive_contact|source_size" --output-on-failure.
[x] DONE V5.7-2: Upgrade ball adhesion/decohesion example
- Implementation:
- Use cohesive law/state in
examples/ball_adhesion_decohesion. - Output force-displacement curve, cohesive energy and decohesion area.
- Use cohesive law/state in
- Tests:
- Add check script for hysteresis, peak pull-off force and dissipated energy.
- Acceptance:
- Example fails if cohesive damage is not activated.
- Completion evidence:
- Added
tools/benchmarks/ball_adhesion_cohesive_benchmark.f90outsidesrc; it discretizes the adhesive ball/membrane patch into concentric rings and drives compression, unloading and pull-off through productionfem_cohesive_law,fem_cohesive_stateandfem_cohesive_metrics. - Added
ball_adhesion_cohesive_benchmark.inpandcheck_cohesive_results.pyunderexamples/ball_adhesion_decohesion;run_case.batnow runs the original contact smoke and the cohesive benchmark. - The benchmark writes
adhesion_history.csv,adhesion_summary.csvanddecohesion_profile.csv, covering force-displacement hysteresis, cohesive energy, peak pull-off force, damage and decohesion area. - CTest
example_ball_adhesion_cohesive_benchmarkpassed on 2026-06-26 with peak pull-off force119.246023, min compression force-362.051100, dissipated energy0.451891017, hysteresis area0.898170568and final failed fraction1.0.
- Added
V5.8 Particle / Flexible Container Coupling
[x] DONE V5.8-1: Complete particle acceptance primitives
- Implementation:
- Cover particle free fall, wall collision, particle-particle pile and particle-facet coupling with production modules.
- Output mass, momentum, kinetic energy, dissipated energy and max overlap.
- Tests:
- Add checks for mass conservation, bounded overlap and nonnegative dissipation.
- Acceptance:
- Diagnostics are available through Fortran and documented output paths.
- Completion evidence:
- Added
pstep_diag_valuesto exposeparticle_step_diagmass, momentum, kinetic energy, step dissipated energy and max-overlap values through the Fortran module API. - Added CTest
particle_acceptance, covering free fall, damped wall rebound, three-particle pile contact and particle-facet load transfer with the production particle state/contact/step/facet modules. - The test checks mass conservation, bounded overlap, nonnegative dissipation, kinetic/momentum diagnostics and particle-facet nodal force balance.
ctest --test-dir build-win-gcc-16 -C Release -R "particle_acceptance|source_size" --output-on-failurepassed on 2026-06-26.
- Added
[x] DONE V5.8-2: Upgrade dynamic grain container example
- Implementation:
- Replace pressure surrogate with real particles and flexible container two-way force mapping.
- Record particle count, contact count, container displacement and energy.
- Tests:
- Add example check script for particle statistics and container response.
- Acceptance:
- Example fails if particle forces are not mapped back to the FEM model.
- Completion evidence:
- Added
tools/benchmarks/dynamic_grain_container_benchmark.f90outsidesrc; it loads a pressure-free flexible S4 container, applies real particle-facet contact throughparticle_fem_apply_all, maps nodal loads throughfsph, advances the FEM response and preserves particle reaction forces for particle integration. - Added
dynamic_grain_container_benchmark.inp,flexible_container_grain_benchmark.inpandcheck_grain_container_results.pyunderexamples/Dynamic_Grain_Packing_of_a_Flexible_Container;run_case.batnow runs the old smoke and the V5.8 benchmark checker. - The checker rejects pressure surrogate input and verifies particle count, contact count, mapped nodal force, downward container response, mass conservation, bounded overlap and nonnegative energy.
- CTest
example_dynamic_grain_container_benchmarkpassed on 2026-06-26 with 4 particles, 4 facet contacts,mapped_steps=40, max mapped vertical load3.68E+01, minimum center displacement-7.29240354E-06and max overlap3.00615680E-03. - Full Release command
ctest --test-dir build-win-gcc-16 -C Release --output-on-failurepassed on 2026-06-26 with 106/106 tests.
- Added
V5.9 Benchmark, Performance And Documentation
[x] DONE V5.9-1: Build V5 benchmark matrix
- Implementation:
- Add a table mapping every V5 completed capability to an example directory, test name, reference metric and tolerance.
- Keep smoke and benchmark tiers separate.
- Tests:
- Default CTest remains fast.
- Extended benchmark command runs the V5 acceptance checks.
- Acceptance:
- No completed V5 capability relies only on a smoke test.
- Completion evidence:
- Added
docs/v5_benchmark_matrix.mdwith V5.2-V5.8 capability-to-test mapping, example directories, output files, reference metrics and acceptance tolerances. - Added CTest label
v5_acceptanceto current V5 acceptance tests and benchmark examples while preserving existing default CTest behavior. - Documented the extended command
ctest --test-dir build-win-gcc-16 -C Release -L v5_acceptance --output-on-failure. - The extended command passed on 2026-06-26 with 35/35 tests.
- Added
[x] DONE V5.9-2: Refresh documentation after each capability closes
- Implementation:
- Update requirements, architecture, detailed design, algorithms, interface, test plan, user manual and developer manual only with factual implementation details.
- Keep status markers only in
docs/v5_development_plan.md.
- Acceptance:
- Status-table wording remains confined to
docs/v5_development_plan.md.
- Status-table wording remains confined to
- Completion evidence:
- Updated README,
docs/01_requirements_specification.md,docs/02_software_architecture_design.md,docs/03_detailed_design.md,docs/04_mathematical_model_and_algorithms.md,docs/05_interface_control_document.md,docs/06_test_and_verification_plan.md,docs/07_user_manual.md,docs/08_developer_manual.md,docs/v5_development_plan.mdanddocs/v5_benchmark_matrix.mdfor V5.8 and V5.9-1 changes. - Core docs describe the implemented particle algorithm, staggered
particle-container coupling, benchmark CLI, output files and verification
commands without adding phase status markers outside
docs/v5_development_plan.md. - Documentation checks verified no phase-status markers in the core docs listed above.
- Updated README,
V5.10 Acceptance And Release
[x] DONE V5.10-1: Create V5 acceptance report
- Implementation:
- Add
docs/v5_acceptance_report.md. - Summarize completed, incomplete and postponed items from
docs/v5_development_plan.md. - Include exact test commands, environment and results.
- Add
- Acceptance:
- Report identifies every remaining deferred item, reason, risk and effect on users.
- Completion evidence:
- Added
docs/v5_acceptance_report.mdwith the current V5 acceptance scope, Windows Release environment, exact CMake/CTest commands, 106/106 default CTest record and 35/35v5_acceptancerecord. - The report summarizes completed V5.2-V5.8 capabilities, remaining engineering gaps, and postponed or out-of-current-module items with reason, risk and user effect.
- README now links to the V5 acceptance report.
- Added
[x] DONE V5.10-2: Final release hygiene
- Implementation:
- Ensure worktree is clean except intended release files.
- Clean generated root result files.
- Run default CTest and any enabled extended benchmark tests.
- Acceptance:
- Release branch or main merge has reproducible test output.
- README and version metadata match the release state.
- Completion evidence:
- Root-level generated result files (
history.csv,nodes_*.csv,elements_*.csv,reactions_*.csv,contact_*.csv,result_*.vtk,femlite.log) were removed after the final full CTest run. ctest --test-dir build-win-gcc-16 -C Release -L v5_acceptance --output-on-failurepassed on 2026-06-26 with 35/35 tests.ctest --test-dir build-win-gcc-16 -C Release --output-on-failurepassed on 2026-06-26 with 106/106 tests.- README and version metadata are aligned on
0.5.0. - V5 release changes are prepared as the intended release-file set on
main; committing these changes makes the worktree clean for the current release checkpoint.
- Root-level generated result files (
V5.11 Finite-Membrane-Strain Shell And Spherical Cap Postbuckling
Boundary for this module:
- A complete case must reproduce the geometric nonlinear postbuckling path from
models.sme.spherical_cap_with_central_point_load.pdf; do not mark it complete while it only runs a linear, small-strain, monotone, or corotational diagnostic sample. - The production route is Abaqus-style finite-membrane-strain S4: finite rotation director update, finite membrane strain, Koiter-Sanders type curvature increment, MITC/ANS assumed strain, and analytic consistent tangent.
- The existing S4 corotational route is temporary technical debt. It may explain current failures, but it is not a stable interface and not acceptance evidence. Once finite-strain S4 takes over, delete its production dispatch, input aliases, tests, documentation entry points, and any unused helper code. Do not leave fallback interfaces.
- Reusable foundations are limited to
fem_shell_section, shell layer/resultant state, shell pressure follower tangent, internal nonsymmetric solver support, and continuation path output.
Current facts:
examples/spherical_cap_with_central_point_loadchecks reference geometry, material scale, Shell-16 small-strain samples, and an optional S4 nonlinear diagnostic deck.- The optional nonlinear diagnostic can reach final displacement in some runs, but the reaction path remains monotone and therefore does not match the PDF postbuckling signature.
continuation_path.csvalready records accepted displacement/reaction rows, and the checker can reject monotone nonlinear curves.SHELL_GEOMETRIC=YES,GEOMETRIC_SHELL,COROTATIONAL_SHELL, andS4_COROTATIONALare migration-era interfaces; the target user-facing syntax isSHELL_GEOMETRIC=FINITE_STRAINorSHELL_GEOMETRIC=LINEAR.
[x] TODO V5.11-0: Redesign docs around finite-strain S4
- Implementation:
- Update
docs/03_detailed_design.mdwith finite-strain S4 modules: rotation state, finite kinematics, assumed strain, nonlinear driver, tangent, drilling, and section coupling. - Update
docs/04_mathematical_model_and_algorithms.mdwith finite membrane strain, finite rotation director update, Koiter-Sanders type curvature, MITC/ANS, and analytic tangent requirements. - Update
docs/05_interface_control_document.md,docs/06_test_and_verification_plan.md,docs/07_user_manual.md,docs/08_developer_manual.md, anddocs/v5_development_plan.mdso they no longer describe corotational S4 as the V5.11 completion route. - Record the deletion rule: old exploratory code and aliases must be removed after the complete implementation replaces them.
- Update
- Acceptance:
- Documentation separates reusable foundations from temporary corotational code and explicitly forbids keeping unused interfaces.
[ ] TODO V5.11-1: Delete obsolete corotational interfaces and dead code
- Implementation:
- Inventory every production call site, input alias, public API, test, and
documentation reference containing
corotational,COROTATIONAL_SHELL,S4_COROTATIONAL, or old boolean-onlySHELL_GEOMETRICsemantics. - Keep only foundations required by finite-strain S4:
fem_shell_section, shell layer state,shell_resultant, pressure follower tangent, nonsymmetric solver support, and continuation path output. - Delete production dispatch paths, parser aliases, helper routines, and tests that only serve the old corotational route and are not needed by the finite-strain implementation.
- Add input validation so
SHELL_GEOMETRIC=FINITE_STRAINandSHELL_GEOMETRIC=LINEARare the stable forms; old aliases fail with a clear input error after migration.
- Inventory every production call site, input alias, public API, test, and
documentation reference containing
- Tests:
- Add parser tests proving old aliases are rejected after migration.
- Run shell, implicit input, spherical cap, and source-size regressions.
- Acceptance:
- No stable user-visible or internal production interface remains for the old corotational route.
rg -n "COROTATIONAL_SHELL|S4_COROTATIONAL|corotational"returns only historical notes or intentionally named removed-history comments, not live production dispatch.
[ ] TODO V5.11-2: Implement finite rotation shell state
- Implementation:
- Add node or shell-node rotation trial/committed state using exponential map or quaternion update.
- Integrate rotation state with reset, backup, rollback, commit, cutback, line-search rejection, Newmark rollback, and restart.
- Keep global node DOF 4:6 as Newton increments while committed director state carries finite rotation history.
- Tests:
- Rigid-body large rotation produces zero or near-zero shell internal force.
- Failed increments restore rotation state exactly.
- Acceptance:
- Rotation state is not recomputed from small-angle accumulated DOF in a way that loses finite rotation objectivity.
[ ] TODO V5.11-3: Implement S4 finite kinematics and MITC/ANS
- Implementation:
- Compute reference/current covariant bases, director fields, surface metrics, finite membrane strain, Koiter-Sanders type curvature increment, and transverse shear strain for S4.
- Handle initially curved or warped shell reference geometry without flattening the element into a small-strain local plane.
- Implement S4 MITC/ANS transverse shear sampling and keep extension points for membrane/bending assumed strain if needed.
- Tests:
- Small-rotation finite-strain S4 matches existing linear S4 patch results.
- Thin shell shear patch does not lock.
- Warped/curved reference patch has no spurious initial stress.
- Acceptance:
- The formulation works for the spherical-cap mesh geometry, not only flat plates.
[ ] TODO V5.11-4: Implement analytic consistent shell tangent
- Implementation:
- Assemble material tangent
B^T D_alg B. - Assemble geometric tangent from membrane force, bending moment, and transverse shear resultants.
- Assemble rotation tangent from director and curvature linearization.
- Assemble drilling stabilization tangent as a separate energy-consistent contribution.
- Keep finite-difference tangent only as an audit tool, never as the final production Newton tangent.
- Assemble material tangent
- Tests:
- Finite-difference column audit passes for elastic S4.
- J2/J2_JC/composite section tangent audit passes under large rotation.
- Newton/cutback count improves over the old corotational diagnostic route on the spherical-cap mesh.
- Acceptance:
- The tangent is analytic, documented, and does not rely on hidden benchmark-only code.
[ ] TODO V5.11-5: Couple finite-strain S4 to shell sections and materials
- Implementation:
- Route ELASTIC, J2, J2_JC, and composite shell sections through
fem_shell_sectionwith trial/rollback semantics. - Complete multilayer plastic through-thickness state where composite layers use plastic materials.
- Preserve membrane-bending coupling for unsymmetric laminates.
- Route ELASTIC, J2, J2_JC, and composite shell sections through
- Tests:
- ELASTIC/J2/J2_JC/composite large-rotation shell material tests pass.
- Plastic layer state rolls back after failed increment.
- Acceptance:
- Unsupported shell material models fail explicitly, with no fallback to an elastic engineering tangent.
[ ] TODO V5.11-6: Complete spherical cap PDF postbuckling benchmark
- Implementation:
- Generate and run Shell-4, Shell-8, and Shell-16 PDF meshes with
a = 10 m,th = 0.203840 m,E = 210 GPa,nu = 0.3, cap anglepi/4, fixed rim, and crown displacement to-6.2 m. - Output nondimensional curve data:
wn = -w/th,Fn = -F*a/(E*th^3*2*pi). - Use production continuation and finite-strain shell code only.
- Generate and run Shell-4, Shell-8, and Shell-16 PDF meshes with
- Tests:
- Checker compares Shell-4/8/16 curves to PDF tables or digitized reference values.
- Checker requires post-peak load drop and later restiffening.
- Checker fails monotone curves, small-strain samples, and old corotational diagnostic decks.
- Acceptance:
example_spherical_cap_point_load_benchmarkvalidates the full postbuckling path, not only geometry or displacement-control samples.
[ ] TODO V5.11-7: Final documentation, benchmark matrix, and evidence
- Implementation:
- Update benchmark matrix only after Shell-4/8/16 checker passes.
- Update acceptance report with exact commands, dates, curve metrics, Newton/cutback counts, and known limits.
- Remove obsolete corotational documentation references after code removal.
- Tests:
- Run targeted shell/implicit/spherical-cap/source-size regressions.
- Run the relevant V5 acceptance subset if benchmark status changes.
- Acceptance:
- V5.11 can be marked PASS only when implementation, tests, docs, and benchmark evidence all align.
V5.12 V5 Development Plan Open Backlog
Boundary for this module:
- This section mirrors the still-open
PARTIALandDEFERREDitems indocs/v5_development_plan.md, especially the 0.5.2two_archesreference route and the engineering close-out priorities listed in section 20.3. - Do not duplicate release hygiene items already closed in V5.10 unless the development plan still describes a concrete remaining engineering action.
- A compact benchmark can be kept as regression coverage, but it cannot close a task that explicitly calls for a production workflow, full continuation path or high-fidelity reference case.
[ ] TODO V5.12-1: Finish examples/two_arches PDF reference route
- Source:
docs/v5_development_plan.mdmarksexamples/two_archesasPARTIAL / 0.5.2 TARGET.- Current coverage is PDF geometry, 30/75 shell mesh, contact activation, 1.2 mm upper-arch midpoint displacement and explicit micro-step stability.
- Implementation:
- Replace the literature-route acceptance path with static continuation or an equivalent global-equation workflow; keep the dynamic micro-step only as geometry/contact binding regression.
- Implement or emulate the global equation
disp_upper - max_disp*para = 0. - Use
disp_upperas the upper-arch midpoint vertical displacement,max_disp = 60 mm, and advanceparafrom0to1, initially withrange(0,0.02,1)or an equivalent continuation step sequence. - Keep the PDF geometry and mesh values explicit in the generator/input:
Ri_upper = 80 mm,Ri_lower = 100 mm, shell width/thicknessd = 3 mm, upper arc80 deg, lower arc100 deg, upper 30 mapped shell elements and lower 75 mapped shell elements. - Keep material values explicit: lower arch
E = 40 GPa,nu = 0.2,rho = 1; upper archE = 20 GPa,nu = 0.3,rho = 1. - Apply the reference in-plane constraints, lower-end fixed constraints,
out-of-plane
yconstraints and upper-arch vertical edge-load control. - Use frictionless shell-shell contact with upper arch as source/slave and lower arch as destination/master.
- Output
two_arches_path.csvwith at leastpara,disp_upper, edge-load factor, active contact count, max gap/penetration, residual and iteration status.
- Tests:
- Upgrade
examples/two_arches/check_two_arches_results.pyto reject the dynamic micro-step path as literature-route PASS evidence. - Verify geometry coordinates, 30/75 mesh counts, material values,
disp_upper=max_disp*pararesidual, contact active set, bounded gap, nonnegative/bounded contact work and load-displacement path shape. - Add a CTest entry or update the existing benchmark entry so
example_two_arches_contact_benchmarkvalidates the static continuation route.
- Upgrade
- Acceptance:
examples/two_archespasses a reference-route checker without relying on explicit dynamic micro-steps.- The checker compares load-displacement/path metrics against documented
reference indicators from
models.sme.two_arches.pdf.
[ ] TODO V5.12-2: Close industrial mortar / AL contact gaps
- Source:
- V5.3 remains
PARTIALindocs/v5_development_plan.md.
- V5.3 remains
- Implementation:
- Complete industrial-grade AL/mortar consistent tangent behavior for nonlinear contact paths.
- Expand restart coverage beyond current active/released/open multiplier audits where the development plan still calls for more scenarios.
- Add larger OpenMP contact benchmarks that exercise nonlinear long paths, not only compact or performance-smoke paths.
- Clarify node-based surface to general element master support: direct support, conversion to facet constraints or explicitly deferred path.
- Tests:
- Add nonlinear long-path contact benchmarks with force, tangent, restart and OpenMP consistency checks.
- Ensure internal BiCGSTAB/GMRES paths expose true status for nonsymmetric or difficult tangent systems instead of hiding failures.
- Acceptance:
- Contact mainline is closer to a production constraint solve, with documented convergence behavior and restart continuity on long paths.
[ ] TODO V5.12-3: Close Mohr-Coulomb structural workflow gaps
- Source:
- V5.4 and
examples/strengthReductionremainPARTIAL / FOS PASS.
- V5.4 and
- Planned INP selector:
- Add a production INP-level nonlinear continuation selector:
*NONLINEAR CONTINUATION, METHOD=value. - Accept numeric method ids
1through5and stable symbolic names so old benchmark decks can stay compact while user-facing decks remain readable. - If the keyword is omitted, use method
1as the default production algorithm. - Reject unknown method ids/names at input validation time; do not silently fall back to a different nonlinear path.
- Record the selected method in nonlinear diagnostics, path CSV files and VTK/run summaries where applicable.
- Completion evidence:
- Added
NLC_*continuation method enums andnonlinear_continuation_methoddefault control state. - Added INP reader support for
*NONLINEAR CONTINUATION, METHOD=value. - Added
tests/data/c3d4_static_nonlinear_continuation.inpandimplicit_inpcoverage for default method 1, ids1..5, symbolic names, invalid values and state preservation on parse failure. - Added continuation method diagnostics to strengthReduction nonlinear chain/cloud/progress CSV output and checker validation.
- Targeted CTest command passed:
ctest --test-dir build-win-gcc-16 -C Release -R "implicit_inp|example_strength_reduction_benchmark" --output-on-failure.
- Added
- Add a production INP-level nonlinear continuation selector:
- Implementation:
- Add structure-level automatic trial re-solve for strength reduction.
- Define and implement nonlinear instability criteria suitable for structural strength-reduction workflows.
- Audit and document the Mohr-Coulomb engineering tangent in structural solves, including convergence status and substep counts.
- Extend
examples/strengthReductionbeyond the current FOS curve so it can reproduce the PDF material case 2,alpha = 45 deg,FOS = 1.525result with about0.3 mdisplacement-cloud scale. - Implement method
1/TWO_STAGE_LOAD_STRENGTHas the default route: first converge the real gravity/load state at strength factorF=1.0, then keep the external load fixed and continue the material strength reduction factor from1.0to the target factor.- Add production nonlinear static control
static_ramp_loadso the implicit static solver can either ramp external loads by pseudo-time or hold the assembled external load factor fixed. - Route
strength_reduction_benchmark --nonlinear-chainthrough the method-1 two-stage solve whennonlinear_continuation_method == 1. - Route
--nl-write-cloudthrough the same two-stage method-1 workflow, with the progress CSV tracking the fixed-load strength-factor stage. - Keep default
*NONLINEAR CONTINUATIONbehavior as method1and continue writing the selected method id to nonlinear chain/cloud outputs. - Reduce method-1 runtime and nonlinear iteration cost enough for the 0.75 m PDF cloud case to run to full target factor in a documented longrun command.
- Add production nonlinear static control
- Implement method
2/ADAPTIVE_TARGET_NEWTONas a production nonlinear static step-size controller that targets a bounded Newton iteration count, grows after cheap accepted steps and shrinks after expensive accepted steps, cutbacks or failed convergence.- Add INP controls
TARGET_NEWTON,GROWTH/GROWTH_FACTORandSHRINK/SHRINK_FACTOR, with validation before state mutation. - Add production diagnostics for target increment, accepted increment, next target increment, accepted Newton count and adjustment reason.
- Write method-2 diagnostics to strength-reduction nonlinear chain/cloud/progress CSV files and validate them in the example checker.
- Add module tests for production adaptive stepping and INP parsing, including invalid-control preservation.
- Add INP controls
- Implement method
3/TRUST_REGION_DAMPED_NEWTONas a safeguarded Newton path with correction-size limits and residual-merit damping for high-load nonlinear segments.- Add INP controls
TRUST_RADIUS,TRUST_MIN_RADIUS,TRUST_MAX_RADIUS,TRUST_GROWTH,TRUST_SHRINK,TRUST_ACCEPT_RATIOandTRUST_GOOD_RATIO. - Clip Newton corrections by the active trust radius before the residual-merit line search.
- Reject residual-increasing damped corrections with a reproducible solver error, allowing the existing cutback/rollback path to respond.
- Update the trust radius from residual merit reduction, damping and line-search rejection count.
- Record trust radius, next radius, damping factor, merit ratio, rejection count and trust adjustment in production diagnostics and strength-reduction CSV/summary output.
- Add INP controls
- Implement method
4/ARC_LENGTH_OR_DISPLACEMENT_CONTROLfor limit-point paths where pure load or strength-factor continuation cannot pass snapback or localization events.- Add production accepted-increment path storage in
fem_control, including control parameter, controlled DOF count, prescribed/actual displacement norms, constraint residual, reaction path, generalized work, Newton iteration and convergence status. - Record direct prescribed-displacement continuation in
implicit_solve_nonlinear_staticforMETHOD=4, using the sameload_factor * amplitudeboundary value that the solver enforces. - Expose the path through
fem_get_continuation_path_count,fem_get_continuation_path_rowandcontinuation_path.csv. - Add low-level solver and INP/API regression coverage for accepted increments, reaction output and zero constraint residual.
- Add production Riks/arc-length controls
ARC_LENGTH/ARC_RADIUSandARC_LOAD_SCALE/RIKS_LOAD_SCALE, with validation before mutating the previous valid control state. - Implement the load-proportional Riks augmented equation in
implicit_solve_nonlinear_static: extended unknowns are displacement and globalload_factor; the reference load vector is computed asdF_ext/dlambda; each Newton iteration solves residual and load directions with the same constrained tangent and enforces the spherical arc constraint. - Remove the old simplified interpretation for load-controlled method 4 cases: load-type problems no longer use ordinary Newton plus accepted-path recording as Riks evidence. The direct path is retained only for explicit nonzero prescribed-displacement control, and cases with neither a proportional load nor nonzero prescribed displacement now fail instead of using a simplified fallback.
- Prove method 4 on a real nonmonotonic or limit-point structure path, so snapback and localization events can be followed without benchmark-specific orchestration.
- Add production accepted-increment path storage in
- Implement method
5/MC_SUBSTEPPING_SEMISMOOTHfor local Mohr-Coulomb material stability, including stress-point substepping, active-set diagnostics and semismooth branch handling around corners.- Add INP controls
MC_MIN_SUBSTEPS,MC_MAX_SUBSTEPS,MC_TARGET_STRAIN,MC_YIELD_TOLandMC_PLASTIC_LIMIT, with validation before mutating the previous valid control state. - Route production
MOHR_COULOMBmaterial updates throughfem_material_mc_driverwhenMETHOD=MC_SUBSTEPPING_SEMISMOOTH. - Store material-point aggregate diagnostics in
statev(27:32): accepted substeps, requested substeps, driver status, branch mask, maximum yield residual and maximum plastic increment. - Keep the default and other continuation methods on the direct single-step Mohr-Coulomb update, while writing consistent single-step diagnostics.
- Add structure-level aggregation of MC substep/branch diagnostics to strengthReduction nonlinear chain/cloud output.
- Prove on the 0.75 m PDF cloud longrun that NC-5 reduces material corner cutbacks or local return failures when used as a documented stabilization component.
- Add INP controls
- Keep the first production implementation mutually exclusive through the
METHOD=selector; if later evidence shows the strongest path is a composition such as1+2+5, add explicit secondary flags instead of overloading the primary method id.
- Tests:
- Add INP parser tests proving omitted keyword selects method
1, all ids1..5and symbolic names are accepted, and invalid values fail before solving. - Add solver diagnostics tests proving the selected method is reported and
that method
1does not regress the existing nonlinear static path. - Add checker coverage for displacement cloud scale and equivalent plastic strain/plastic-zone behavior once the full nonlinear continuation path is available.
- Reject linear-static VTK displacement output as reference evidence.
- Add INP parser tests proving omitted keyword selects method
- Acceptance:
examples/strengthReductioncan choose any planned nonlinear continuation method from the INP file, and the default deck uses method1without a command-line override.- Method
1reaches the targetFOS=1.525PDF route, or the run summary reports a reproducible nonlinear/material failure instead of stopping at an ambiguous partialaccepted_time. - Strength reduction moves from compact FOS-curve validation to a documented nonlinear structural workflow with PDF displacement/plasticity evidence.
- Partial completion evidence for method
1:cmake --build build-win-gcc-16 --config Release --target strength_reduction_benchmark test_implicit_inppassed on 2026-06-27.ctest --test-dir build-win-gcc-16 -C Release -R "implicit_inp|example_strength_reduction_benchmark" --output-on-failurepassed on 2026-06-27.- Path smoke passed:
build-win-gcc-16\strength_reduction_benchmark.exe examples\strengthReduction\strength_reduction_slope_static.inp build-win-gcc-16\strength_reduction_twostage_smoke --nonlinear-chain --nl-max-trials 1 --nl-increments 2 --nl-max-newton 3 --nl-linear-iter 100 --nl-tol 1.0e-3. - Cloud smoke passed:
build-win-gcc-16\strength_reduction_benchmark.exe examples\strengthReduction\strength_reduction_slope_static.inp build-win-gcc-16\strength_reduction_twostage_cloud_smoke --nl-write-cloud --nl-cloud-factor 1.525 --nl-cloud-step 1525 --nl-increments 2 --nl-max-newton 3 --nl-linear-iter 100 --nl-tol 1.0e-3. - Medium 0.75 m method-1 cloud probe with
--nl-increments 10 --nl-max-newton 20 --nl-linear-iter 1000 --nl-tol 1.0e-3 --nl-preconditioner ilu0exceeded 120 s and was stopped; fullaccepted_time=1.0remains open.
- Completion evidence for method
5material-point and structure-level diagnostics:METHOD=MC_SUBSTEPPING_SEMISMOOTHroutes productionMOHR_COULOMBupdates throughfem_material_mc_driverand writesstatev(27:32).strength_reduction_benchmarknow aggregates MC point count, updated points, accepted/requested substeps, limited points, branch mask, maximum yield residual and maximum plastic step into nonlinear chain/cloud/progress rows and summary CSV output.examples/strengthReduction/check_strength_reduction_results.pyrejects missing or invalid MC row/summary diagnostics.cmake --build build-win-gcc-16 --config Release --target strength_reduction_benchmarkpassed on 2026-06-27.- Nonlinear chain/cloud smoke output under
build-win-gcc-16\strength_reduction_mc_diag_smokepassedexamples\strengthReduction\check_strength_reduction_results.py, including optional MC chain/cloud/progress diagnostics. ctest --test-dir build-win-gcc-16 -C Release -R "material_mohr_coulomb|implicit_inp|example_strength_reduction_benchmark" --output-on-failurepassed on 2026-06-27.
- Completion evidence for method
2:cmake --build build-win-gcc-16 --config Release --target test_solver_implicit test_implicit_inp strength_reduction_benchmarkpassed on 2026-06-27.ctest --test-dir build-win-gcc-16 -C Release -R "solver_implicit|implicit_inp|example_strength_reduction_benchmark" --output-on-failurepassed on 2026-06-27.solver_implicitnow verifies adaptive growth reaches the final static time with fewer accepted increments than the fixed initial step would use.implicit_inpverifiesMETHOD=ADAPTIVE_TARGET_NEWTON,TARGET_NEWTON,GROWTHandSHRINK, including failure without changing previous valid settings.examples/strengthReduction/check_strength_reduction_results.pynow rejects malformed nonlinear chain/cloud diagnostics for target increment, accepted increment, next target increment and adjustment reason.
- Completion evidence for method
3:cmake --build build-win-gcc-16 --config Release --target test_solver_implicit test_implicit_inp strength_reduction_benchmarkpassed on 2026-06-27.ctest --test-dir build-win-gcc-16 -C Release -R "solver_implicit|implicit_inp|example_strength_reduction_benchmark" --output-on-failurepassed on 2026-06-27.solver_implicitnow verifies thatMETHOD=TRUST_REGION_DAMPED_NEWTONlimits the applied correction norm, converges through multiple damped Newton iterations, updates trust diagnostics and preserves the expected displacement solution.implicit_inpverifies all trust-region control parameters and confirms invalid trust radius bounds fail without mutating previous valid settings.examples/strengthReduction/check_strength_reduction_results.pynow rejects missing or invalid trust-radius, damping, merit-ratio and rejection-count diagnostics in nonlinear chain/cloud/progress output.
- Partial completion evidence for method
4:fem_controlnow owns a dynamically sized accepted-increment continuation path table;fem_solver_implicitrecords direct displacement-control rows after nonlinear static increments converge, while the active load factor is still the one used by the solved increment.fem_controlalso storesnlc_arc_length_radius,nlc_arc_load_scale,nlc_last_arc_constraint,nlc_last_arc_lambdaandnlc_last_arc_length.fem_inp_nlcparsesARC_LENGTH/ARC_RADIUSandARC_LOAD_SCALE/RIKS_LOAD_SCALEforMETHOD=ARC_LENGTH_OR_DISPLACEMENT_CONTROL.fem_solver_implicitnow routes load-type method 4 cases to a Riks augmented equation with displacement plusload_factorunknowns and keeps direct displacement-control path recording separate from Riks evidence. Method 4 inputs with neither proportional load nor nonzero prescribed displacement return a solver error instead of falling back to ordinary Newton path recording.fem_apiexposes row-by-row continuation path access andfem_output_csvwritescontinuation_path.csvwhen path data exists.tests/data/c3d4_static_arc_disp_continuation.inpselectsMETHOD=ARC_LENGTH_OR_DISPLACEMENT_CONTROL;implicit_inpverifies the API path rows andsolver_implicitverifies the in-memory direct displacement path, the load-type Riks path and the no-control rejection.cmake --build build-win-gcc-16 --config Release --target test_solver_implicit test_implicit_inppassed on 2026-06-27.ctest --test-dir build-win-gcc-16 -C Release -R "solver_implicit|implicit_inp" --output-on-failurepassed on 2026-06-27.
- Partial completion evidence for method
5:src/base/fem_control.f90now stores MC substep controls andsrc/input/fem_inp_nlc.f90parses/validates them from*NONLINEAR CONTINUATION.src/material/fem_material_j2.f90now dispatches productionMOHR_COULOMBupdates tofem_material_mc_driveronly whenMETHOD=MC_SUBSTEPPING_SEMISMOOTH.src/material/fem_material_mohr_coulomb.f90now writes consistent single-step state diagnostics and reservesstatev(27:32)for MC substep aggregates.cmake --build build-win-gcc-16 --config Release --target test_material_mohr_coulomb test_implicit_inppassed on 2026-06-27.ctest --test-dir build-win-gcc-16 -C Release -R "material_mohr_coulomb|implicit_inp" --output-on-failurepassed on 2026-06-27.
[ ] TODO V5.12-4: Move buckling and cyclic symmetry into the main solver path
- Source:
- V5.5 and
examples/buckling_corrugated_shellremainPARTIAL.
- V5.5 and
- Implementation:
- Add a main-solver Euler column buckling workflow through
femlite --bucklingand the dedicated*BUCKLING COLUMNinput block. - Move Euler column input, assembly, dense buckling solve and CSV output
into production
src/solver/fem_buckling_column.f90. - Delete the old duplicate Euler helper-side assembly/solve algorithm
from
tools/benchmarks/euler_column_buckling_benchmark.f90; keep only a compatibility wrapper around the production module. - Complete a general
*BUCKLINGstep in the mainfemliteinput/solve flow. - Assemble shell and solid geometric stiffness after static preload through the production element/solver path.
- Integrate modal output with the normal output workflow.
- Bring cyclic sector constraints into the main solve path, including node pairing, coordinate rotation and shell rotational DOF mapping.
- Upgrade corrugated shell coverage from compact cyclic benchmark to a full shell FE preload-buckling high-fidelity model.
- Add a main-solver Euler column buckling workflow through
- Tests:
- Add module coverage for Euler column parsing, validation, solve diagnostics, output writing and mode boundary conditions.
- Update
examples/euler_column_bucklingchecker and double-click script so the regression runsfemlite --buckling, not the benchmark helper. - Run targeted CLI regression after adding the new analysis mode.
- Add general input-level
*BUCKLINGtests, preload-to-buckling tests and cyclic sector shell/solid mapping tests. - Keep Euler column benchmark as regression coverage through CTest.
- Keep compact corrugated benchmark as regression coverage while adding main-solver cyclic/preload coverage.
- Acceptance:
- Users can run the Euler column buckling workflow through
femlite --buckling, not only through benchmark helper tools. - Users can run a general preload-to-buckling workflow for shell/solid models through normal INP input.
- Cyclic sector constraints work through the main solver path.
- Users can run the Euler column buckling workflow through
- Completion evidence:
build-win-gcc-16\femlite.exe examples\euler_column_buckling\euler_column_buckling.inp --buckling --output-dir build-win-gcc-16\app_bucklingpassed on 2026-06-27 with first mode1.84239E+06, Euler reference1.84233E+06, residual1.50015E-11and relative error3.27661E-05.ctest --test-dir build-win-gcc-16 -R "^(buckling_support|example_euler_column_buckling_benchmark|smoke)$" --output-on-failurepassed on 2026-06-27.ctest --test-dir build-win-gcc-16 -R "^(cli_implicit_linear|cli_static_linear|cli_static_nonlinear|cli_implicit_newmark|cli_implicit_newmark_nonlinear)$" --output-on-failurepassed on 2026-06-27.
[ ] TODO V5.12-5: Promote roll forming from benchmark helpers to production workflow
- Source:
- V5.6 and
examples/roll_formingremainPARTIAL.
- V5.6 and
- Implementation:
- Add a main-solver roll-forming process step or equivalent production workflow for rigid roller kinematics, rotation, friction, plastic forming and unloading/springback.
- Support full 3D workpiece meshes, not only compact section benchmarks.
- Define restart-driven multi-step process semantics for forming and springback.
- Add larger longrun stability checks for the process flow.
- Tests:
- Keep roller kinematics and compact J2 springback benchmarks as regression.
- Add a full 3D workpiece run with restart, unloading, residual displacement and plastic-zone checks.
- Acceptance:
- Roll forming no longer depends on benchmark-specific orchestration for the core process path.
[ ] TODO V5.12-6: Integrate cohesive contact into the main contact workflow
- Source:
- V5.7 and
examples/ball_adhesion_decohesionremainPARTIAL.
- V5.7 and
- Implementation:
- Integrate cohesive law/state/metrics into the production contact solve, including normal/tangential traction, damage evolution, unloading/reload and energy output.
- Implement ordinary contact to cohesive contact switching rules and the reverse/released-state handling where applicable.
- Add tangent support for cohesive contact and restart persistence for damage, maximum opening, adhesion energy and decohesion state.
- Upgrade the ball-adhesion example from compact cohesive ring benchmark to a full ball-membrane FE cohesive contact long path.
- Tests:
- Extend restart tests to cohesive damage/history fields.
- Add full FE force-displacement, hysteresis, dissipated energy, damage and decohesion-area checks.
- Acceptance:
- Cohesive behavior is available through the main contact workflow and not only through single-integration-point or benchmark-only drivers.
[ ] TODO V5.12-7: Upgrade deferred and partial high-fidelity examples
- Source:
docs/v5_development_plan.mdlists several example directories asDEFERREDorPARTIAL.
- Implementation:
- Upgrade
examples/shell_solid_connectionfrom shared-node smoke to a high-fidelity shell-solid connection/contact benchmark with transition-zone stress and contact-pressure checks. - Upgrade
examples/buckling_corrugated_shellto a complete shell FE preload-buckling model after main solver*BUCKLINGsupport exists. - Upgrade
examples/roll_formingto a full 3D workpiece benchmark after the production roll-forming workflow exists. - Upgrade
examples/ball_adhesion_decohesionto a full FE cohesive ball-membrane benchmark after main contact integration exists. - Extend
examples/Dynamic_Grain_Packing_of_a_Flexible_Containerwith larger particle counts, neighbor-search performance checks and longrun energy stability.
- Upgrade
- Tests:
- Each upgraded example needs a README, input/generator, run script, checker, CTest entry and documented reference metrics/tolerances.
- Acceptance:
- No example is listed as V5 PASS if it is still a compact surrogate, fallback path or smoke-only run.
[ ] TODO V5.12-8: Complete longrun and performance close-out
- Source:
- V5.9/V5.10 remain
PARTIALin the development plan because larger longrun and full performance close-out remain recommended.
- V5.9/V5.10 remain
- Implementation:
- Define longrun tiers for contact, Mohr-Coulomb, buckling, roll forming, cohesive contact and particle-container coupling.
- Record memory, iteration, residual, timing and platform stability metrics.
- Update
docs/v5_benchmark_matrix.mdwhen new longrun/performance tests are formalized. - Restore
source_sizegovernance after the Riks/NLC and buckling work: split*NONLINEAR CONTINUATIONparsing into productionsrc/input/fem_inp_nlc.f90, keepfem_inp_helpersas generic keyword/data helpers, shorten the dense solver, CG solver, S4 stiffness and NLC parser test routines below the hard routine threshold, and document remaining structural exceptions with explicit split reasons intests/source_size_exceptions.txt. - Split implicit constraint/tangent application out of
fem_solver_implicit: added productionsrc/solver/fem_implicit_constraints.f90for Dirichlet, Robin, MPC, follower-load tangent and contact tangent application, removed the old private duplicate routines from the main implicit solver, and kept the nonlinear/static/Newmark behavior covered by targeted regression. - Split database lifecycle cleanup out of
fem_database: added productionsrc/mesh/fem_database_lifecycle.f90, keptdatabase_finalize(ierr)as the stable public wrapper, removed stale contact/free helper wrappers, and removed the now-stale hard file exception forsrc/mesh/fem_database.f90after the file dropped below 2000 lines.database_finalize_storageis now split into private model-array, material-array and step/load-array release helpers, sofem_database_lifecycle.f90no longer appears in the source-size routine review-warning list. - Split stable time-step support out of the public API facade: added
production
src/base/fem_api_stable_dt.f90for material wave speed, element characteristic length and current-position helper logic, keptfem_estimate_stable_dtas the stable public API wrapper, and removed the now-stale hard file exception forsrc/base/fem_api.f90after the file dropped below 2000 lines. - Split the strengthReduction benchmark orchestration outside
src: addedtools/benchmarks/strength_reduction_benchmark_cli.f90for CLI and nonlinear-chain option parsing, addedtools/benchmarks/strength_reduction_benchmark_report.f90for CSV/summary naming and report formatting, and split cloud/two-stage progress helpers inside the benchmark driver so all benchmark routines are below the hard 128-line threshold. - Split the hard routine-size exceptions in
fem_solver_implicit:implicit_solve_nonlinear_staticis now a thin dispatcher over begin, fixed/adaptive scheduling and arc driver helpers; Riks/arc-length initialization, predictor and constraint-measure updates are separated fromstatic_arc_increment; nonlinear static Newton correction, line search and trust-region update are separated fromnonlinear_static_increment. All routine entries were removed fromtests/source_size_exceptions.txt. - Clear the remaining file-level
source_sizeexception forfem_solver_implicit: added productionsrc/solver/fem_solver_implicit_support.f90for shared convergence, nonlinear linear-solver fallback, stiffness/external assembly, CSR/mass and trust-region helpers; added productionsrc/solver/fem_solver_newmark.f90for linear and nonlinear Newmark integration; kept the public Newmark entry points re-exported byfem_solver_implicit. The active entries intests/source_size_exceptions.txtare now empty. - Continue review-threshold cleanup for the current implicit solver split:
arc driver initialization, Riks iteration evaluation/correction and
Newmark nonlinear initialization/correction/success/failure handling were
moved into helpers.
implicit_solve_static_arc,static_arc_incrementandimplicit_newmark_nonlinear_stepno longer appear in thesource_sizereview-warning list. - Continue file-level review-target cleanup for
fem_solver_implicit: added productionsrc/solver/fem_solver_static_nonlinear.f90for nonlinear static fixed/adaptive scheduling, static predictor history, direct displacement-control path recording, load-type Riks/arc-length and nonlinear static Newton increments.fem_solver_implicitnow keeps linear static plus dispatcher/public-entry ownership and no longer appears in the source-size review-warning list. - Continue review-target cleanup on other large production modules only
where it clarifies ownership and preserves full algorithms, especially
fem_api,fem_database,fem_element_internaland benchmark tool files.fem_api: extracted shared Newmark run preparation for implicit and nonlinear Newmark API runs;fem_run_newmark_nonlinearno longer appears in the source-size routine warning list.fem_api: split the public API facade into production support modules:fem_api_stateowns the initialized flag,fem_api_couplingowns SPH/contact/surface/facet API routines,fem_api_diagnosticsowns convergence/continuation/linear-solver/shell-stability API routines, andfem_api_state_accessowns node/element state query API routines. The originalfem_apimodule keeps initialization, model I/O, solve/output orchestration and re-exports the moved public entries;fem_api.f90no longer appears in the source-size file-level review-warning list.fem_control: splitcontrol_set_defaultsinto private grouped reset helpers for time/nonlinear controls, solver controls, diagnostics and feature flags. The public default-reset entry remains unchanged, andcontrol_set_defaultsno longer appears in the source-size routine review-warning list.fem_material_j2: split J2 plastic state update intoupdate_j2_plastic_state, keeping the return-mapping algorithm intact; changedstress_dependent_modulusto preserve the caller-provided Young's modulus value on error returns.material_update_j2no longer appears in the source-size routine review-warning list, and the Windows GCC maybe-uninitialized warning for SDE Young's modulus is gone.fem_database: moved database initialization storage reset intodatabase_initialize_storageinfem_database_lifecycle, keeping the publicdatabase_initialize(ierr)wrapper stable; added productionfem_database_lookupfor ID/name queries and surface face helpers, added productionfem_database_validationfor full model validation, and keptdatabase_validate_model(ierr)as a stable wrapper.fem_database.f90,database_initialize,validate_materialsandvalidate_contact_datano longer appear in the source-size review-warning list.fem_material_mohr_coulomb: initialized MC parameter and Lame parameter outputs on all error paths, clearing the Windows GCC maybe-uninitialized warnings for tension, lambda and shear without changing the return-mapping or tangent algorithms.fem_linear_solver_dense: split dense CSR copy, partial-pivot elimination/back-substitution, pivot selection and residual calculation into private helpers while preserving the internal dense pivoting fallback algorithm.linear_dense_solveno longer appears in the source-size routine review-warning list.fem_linear_solver_iterative: split CG preconditioner/initialization setup, BiCGSTAB initialization and omega correction, and GMRES initialization into private helpers while preserving the production iteration formulas and internal preconditioner dispatch.linear_cg_solve,linear_bicgstab_solveandlinear_gmres_solveno longer appear in the source-size routine review-warning list.fem_assembly_csr: split CSR pattern row counting and row-column population into private helpers while preserving element/MPC/contact sparsity insertion and row sorting.assembly_build_csr_patternno longer appears in the source-size routine review-warning list.fem_inp_helpers: moved Mohr-Coulomb material line parsing into productionfem_inp_material_parser, moved contact pair/property/friction parsing into productionfem_inp_contact_parser, and keptfem_inp_helpersfocused on generic token/keyword helpers and shared INP utilities.parse_mc_line,parse_contact_pair_headerand the file-levelfem_inp_helpers.f90warning no longer appear in the source-size review-warning list.fem_inp_reader: split count-model state reset and node/element total validation out of the first-pass INP counting routine. The first-pass keyword/data counting behavior remains unchanged, andinp_count_modelno longer appears in the source-size routine review-warning list.fem_output_csv: split contact CSV header, summary row and pair row writing into private helpers while preserving the existing CSV schema and contact diagnostics fields.output_csv_write_contactno longer appears in the source-size routine review-warning list.fem_particle_config_check: split particle check limit parsing intopcheck_parse_limits, keeping line cleaning, CHECK data-line handling and final validation unchanged.pcheck_parse_lineno longer appears in the source-size routine review-warning list.
- Tests:
- Add documented extended commands for longrun/performance suites, separate from default fast CTest.
- Re-run relevant Windows GCC, Windows Intel/MSVC and WSL GNU subsets when longrun coverage changes.
- Run targeted source-size and behavior regression after the parser/solver
cleanup.
Completion evidence on 2026-06-27:
ctest --test-dir build-win-gcc-16 -R "^(implicit_inp|linear_solver_cg|shell_internal|source_size)$" --output-on-failureandctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|linear_solver_cg|shell_internal|buckling_support|example_euler_column_buckling_benchmark|cli_implicit_linear|cli_static_linear|cli_static_nonlinear|cli_implicit_newmark|cli_implicit_newmark_nonlinear)$" --output-on-failureboth passed. - Run targeted regression after splitting implicit constraint helpers.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_solver_implicit test_implicit_inp -j 4andctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|source_size)$" --output-on-failureboth passed. - Run targeted build and source-size cleanup after splitting database
lifecycle.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_implicit_inp test_solver_implicit -j 4passed; source-size was rerun and exposed the stalesrc/mesh/fem_database.f90file exception, which was removed; rerunctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed. - Run targeted build and source-size cleanup after splitting API stable
time-step support.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_implicit_inp test_solver_implicit -j 4passed; source-size was rerun and exposed the stalesrc/base/fem_api.f90file exception, which was removed; rerunctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed. - Run targeted build and source-size cleanup after splitting
strengthReduction benchmark CLI/report/cloud helpers.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target strength_reduction_benchmark -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(source_size|example_strength_reduction_benchmark)$" --output-on-failurepassed after removing stale benchmark routine exceptions. - Run targeted build and source-size cleanup after splitting
fem_solver_implicitnonlinear static and Riks routine helpers. Completion evidence on 2026-06-27:cmake --build build-win-gcc-16 --target test_solver_implicit test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed after removing staleimplicit_solve_nonlinear_static,static_arc_incrementandnonlinear_static_incrementroutine exceptions. - Run targeted build and source-size cleanup after splitting implicit
support and Newmark into focused production modules.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_solver_implicit test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed after removing the stalesrc/solver/fem_solver_implicit.f90file exception.tests/source_size_exceptions.txtnow contains no active exceptions. - Run targeted build and source-size cleanup after reducing the current
implicit solver review-size routines.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_solver_implicit test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed afterimplicit_solve_static_arc,static_arc_incrementandimplicit_newmark_nonlinear_stepdisappeared from the source-size warning list. - Run targeted build and source-size cleanup after moving nonlinear static
scheduling, Riks/arc-length and static Newton increments into
fem_solver_static_nonlinear. Completion evidence on 2026-06-27:cmake --build build-win-gcc-16 --target test_solver_implicit test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed, andfem_solver_implicit.f90no longer appears in thesource_sizewarning list. - Run targeted build and API/source-size cleanup after extracting shared
Newmark run preparation inside
fem_api. Completion evidence on 2026-06-27:cmake --build build-win-gcc-16 --target test_solver_implicit test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(solver_implicit|implicit_inp|source_size|c_api)$" --output-on-failurepassed, andfem_run_newmark_nonlinearno longer appears in thesource_sizeroutine warning list. - Run targeted build and API facade/source-size cleanup after splitting
coupling, diagnostics and state-access API routines out of
fem_api. Completion evidence on 2026-06-27:cmake --build build-win-gcc-16 --target test_c_api test_smoke test_solver_implicit test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(smoke|c_api|solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed, andfem_api.f90no longer appears in thesource_sizefile-level review-warning list. - Run targeted build and source-size cleanup after splitting database
lifecycle release categories.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_smoke test_restart test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(smoke|restart|implicit_inp|source_size)$" --output-on-failurepassed, anddatabase_finalize_storageno longer appears in thesource_sizeroutine review-warning list. - Run targeted build and source-size cleanup after splitting
control_set_defaults. Completion evidence on 2026-06-27:cmake --build build-win-gcc-16 --target test_implicit_inp test_solver_implicit test_element_stiffness test_linear_solver_cg -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(implicit_inp|solver_implicit|element_stiffness|linear_solver_cg|source_size)$" --output-on-failurepassed, andcontrol_set_defaultsno longer appears in thesource_sizeroutine review-warning list. - Run targeted build and source-size cleanup after splitting J2 plastic
state update and clearing the SDE Young's modulus warning.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_material_j2 test_material_mohr_coulomb test_implicit_inp -j 4passed without the previousyoung may be used uninitializedwarning;ctest --test-dir build-win-gcc-16 -R "^(material_j2|material_mohr_coulomb|implicit_inp|source_size)$" --output-on-failurepassed, andfem_material_j2.f90no longer appears in thesource_sizewarning list. - Run targeted build and source-size cleanup after moving database
initialization into lifecycle storage helpers and splitting database
validation routines.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_database_topology test_smoke test_restart test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(database_topology|smoke|restart|implicit_inp|source_size)$" --output-on-failurepassed, anddatabase_initializeno longer appears in thesource_sizewarning list. After splitting validation helpers and clearing MC maybe-uninitialized warnings,cmake --build build-win-gcc-16 --target test_material_mohr_coulomb test_database_topology test_implicit_inp -j 4passed without the previous MC warnings, andctest --test-dir build-win-gcc-16 -R "^(material_mohr_coulomb|database_topology|implicit_inp|source_size)$" --output-on-failurepassed. - Run targeted build and source-size cleanup after moving database lookup
and validation into dedicated production modules.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_database_topology test_smoke test_implicit_inp test_contact -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(database_topology|smoke|implicit_inp|contact|source_size)$" --output-on-failurepassed. Directcheck_source_size.pyoutput no longer listssrc/mesh/fem_database.f90or its validation routines. - Run targeted build and source-size cleanup after splitting the dense
solver fallback.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_linear_solver_cg test_solver_implicit test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(linear_solver_cg|solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed, and directcheck_source_size.pyoutput no longer listslinear_dense_solve. - Run targeted build and source-size cleanup after splitting the
iterative CG/BiCGSTAB/GMRES solver routines.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_linear_solver_cg test_solver_implicit -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(linear_solver_cg|solver_implicit|source_size)$" --output-on-failurepassed. Directcheck_source_size.pyoutput no longer listslinear_cg_solve,linear_bicgstab_solveorlinear_gmres_solve. - Run targeted build and source-size cleanup after splitting CSR assembly
pattern helpers.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_assembly_csr test_solver_implicit test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(assembly_csr|solver_implicit|implicit_inp|source_size)$" --output-on-failurepassed, and directcheck_source_size.pyoutput no longer listsassembly_build_csr_pattern. - Run targeted build and source-size cleanup after moving material/contact
INP parsing out of
fem_inp_helpers. Completion evidence on 2026-06-27:cmake --build build-win-gcc-16 --target test_implicit_inp test_contact test_material_mohr_coulomb -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(implicit_inp|contact|material_mohr_coulomb|source_size)$" --output-on-failurepassed. Directcheck_source_size.pyoutput no longer listssrc/input/fem_inp_helpers.f90,parse_mc_lineorparse_contact_pair_header. - Run targeted build and source-size cleanup after splitting the INP
first-pass counter.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(implicit_inp|source_size)$" --output-on-failurepassed, and directcheck_source_size.pyoutput no longer listsinp_count_model. - Run targeted build and source-size cleanup after splitting contact CSV
output helpers.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_vtk_output test_contact test_implicit_inp -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(vtk_output|contact|implicit_inp|source_size)$" --output-on-failurepassed, and directcheck_source_size.pyoutput no longer listsoutput_csv_write_contact. - Run targeted build and source-size cleanup after splitting particle
check parsing.
Completion evidence on 2026-06-27:
cmake --build build-win-gcc-16 --target test_particle_config_check test_particle_config_suite -j 4passed;ctest --test-dir build-win-gcc-16 -R "^(particle_config_check|particle_config_suite|source_size)$" --output-on-failurepassed, and directcheck_source_size.pyoutput no longer listspcheck_parse_line.
- Acceptance:
- V5 performance and longrun coverage has clear commands, output metrics, tolerances and platform records.