10 KiB
10 KiB
FemLite V5 Benchmark And Acceptance Matrix
日期:2026-06-26
本文档记录当前 V5 已完成能力对应的测试入口、示例目录、参考指标和容差。
状态标记仍只维护在 docs/v5_development_plan.md;本文件只给出可执行验收矩阵。
测试层级
| 层级 | 用途 | 推荐命令 |
|---|---|---|
| 默认回归 | 快速确认全部单元、模块、CLI、示例和 benchmark 不回退 | ctest --test-dir build-win-gcc-16 -C Release --output-on-failure |
| V5 验收子集 | 只运行当前 V5 已完成能力的核心测试和 benchmark | ctest --test-dir build-win-gcc-16 -C Release -L v5_acceptance --output-on-failure |
| 示例 benchmark | 只运行带 benchmark 标签的示例级检查 | ctest --test-dir build-win-gcc-16 -C Release -L benchmark --output-on-failure |
| 定向调试 | 调试单个能力或相邻能力 | ctest --test-dir build-win-gcc-16 -C Release -R "<test-name>" --output-on-failure |
默认回归当前 Windows GCC 16 Release 记录为 106/106 passed。V5 验收子集
当前记录为 35/35 passed。
多平台复测矩阵
| 平台 | 构建目录 | 工具链 | 默认 CTest | V5 验收子集 | 备注 |
|---|---|---|---|---|---|
| Windows GCC | build-win-gcc-16 |
GNU Fortran 16.1.0 | 106/106 passed | 35/35 passed | 20.1 clean clone 和 20.2 后本地回归均通过 |
| WSL GNU | build-wsl-gfortran-v5-20-2 |
GNU Fortran 13.3.0、GNU C 13.3.0、CMake 3.28.3 | 106/106 passed | 35/35 passed | benchmark 工具已修正跨平台路径分隔符 |
| Windows Intel/MSVC | build-win-ifx-v5-20-2 |
VS DevCmd 17.14.33、MSVC 19.44.35227.0、IntelLLVM ifx 2026.0.0 | 106/106 passed | 35/35 passed | CTest 环境优先加载 ifx compiler runtime;Mohr-Coulomb 边界分类容差已稳定 |
| Windows GCC OpenMP | build-win-gcc-16 |
GNU Fortran 16.1.0,OpenMP enabled | contact_omp1、contact_omp4、perf_contact_pair_omp_consistency 3/3 passed |
n/a | 1/4 线程 contact/performance smoke 非计时统计一致 |
V5 验收矩阵
| V5 项 | 能力 | 目录或模块 | CTest 名称 | 参考指标 | 容差/验收条件 |
|---|---|---|---|---|---|
| V5.2 | 内部 solver 诊断、no-external-solver 策略 | src/solver, tests/module, tests/interface |
linear_solver_cg, csr_diagnostics, solver_implicit, implicit_inp, c_api, CLI implicit/static tests |
CG/BiCGSTAB/GMRES 迭代、残差、CSR matrix class、legacy external id rejection | 旧外部 method/backend id 被拒绝且不改变设置;静力、隐式和非线性路径通过内部 solver dispatch |
| V5.3 | 非匹配实体 mortar 压缩 | examples/contact_two_blocks_compression |
example_contact_two_blocks_compression_benchmark |
pressure_profile.csv, active contact, master coverage, weighted gap, multiplier residual |
多 master facet 覆盖;weighted penetration 和 multiplier residual 在 checker 容差内;VTK 输出存在 |
| V5.3 | 大滑移 mortar-friction | examples/contact_block_sliding |
example_contact_block_sliding_benchmark |
sliding_profile.csv, stick/slip, accumulated slip, tangential force, friction work |
多 master/active candidate;累计滑移和摩擦功为正且非负耗散;VTK 输出存在 |
| V5.3 | shell-shell contact | examples/shell_shell_contact |
example_shell_shell_contact_benchmark |
contact profile, active contact, force norm, gap residual, augmented multiplier | active contact 大于零;gap/force/multiplier 指标通过 checker |
| V5.3 | shell-solid contact | examples/shell_solid_contact |
example_shell_solid_contact_benchmark |
contact profile, master search, shell-to-solid force transfer | active contact 大于零;master search 和 nodal force 指标通过 checker |
| V5.3 | 接触状态和 restart 连续性 | tests/module |
contact_mortar_al, contact_mortar_iter, contact_mortar_report, contact_mortar_tangent, contact_multiplier_report, restart |
AL multiplier, contact_multiplier_audit, mortar_tan_audit_matrix, tangent/report diagnostics, restart restored history |
接触历史、摩擦累计量和 multiplier 状态在 restart 后连续;0.5.1 覆盖 active/released/open multiplier 写读、duplicate/invalid 为零、commit/trial 差异为零,并检查 mortar tangent row/column balance、刚体平移残差、非对称量和能量 probe |
| V5.4 | Mohr-Coulomb 材料点 | tests/unit |
material_mohr_coulomb, material_mc_driver, material_mc_envelope |
三轴压缩/伸展、纯剪、张拉截断、branch id、plastic multiplier | yield margin、分支号、塑性增量和 envelope safety ratio 通过测试容差 |
| V5.4 | 强度折减坡体 benchmark | examples/strengthReduction |
example_strength_reduction_benchmark |
FS=1.21125, 8 trials, 3 stable, 5 unstable, 2 active plastic probes |
safety factor 在 checker 容差内;bracket 收敛;plastic zone 和 displacement probe 激活 |
| V5.5 | Euler column 解析屈曲 | examples/euler_column_buckling |
example_euler_column_buckling_benchmark |
first load relative error 3.27660856E-05, residual 1.50014805E-11, phi^T K_G phi=1 |
相对误差、残差和几何刚度归一化通过 checker |
| V5.5 | 波纹壳循环屈曲 benchmark | examples/buckling_corrugated_shell |
example_buckling_corrugated_shell_benchmark |
selected wave 4 load 453.031407, critical wave 8 load 393.369677, cyclic/full relative error 1.25473461E-16 |
循环边界残差、模态残差、wave sweep 和 modal CSV 通过 checker |
| V5.5 | 屈曲/循环模块 | tests/module |
buckling_support, cyclic_symmetry |
geometric stiffness helper, cyclic map residual | 内部 dense 特征值、Euler helper 和周期映射通过模块容差 |
| V5.6 | 辊运动学和正则化牵引 | examples/roll_forming |
example_roll_forming_kinematics_benchmark, rigid_roller |
mean slip 0.4 with spin vs 0.2 without spin; mean traction 289.208274 vs 228.478247; torque 14.4604137 |
有/无角速度路径必须产生不同 slip/traction;摩擦能和扭矩为正 |
| V5.6 | 塑性成形和回弹 benchmark | examples/roll_forming |
example_roll_forming_springback_benchmark |
springback ratio 0.473154068, residual displacement 0.0316107559, plastic work 1.11591736E-05, 56/81 plastic points |
塑性功为正;塑性区激活;残余弯矩接近零;回弹比例在 checker 范围内 |
| V5.7 | cohesive 单积分点 | tests/module |
cohesive_contact |
bonded loading, mixed-mode damage, unloading/reload, complete decohesion, restart | 损伤不可逆;耗散非负;failed 状态 traction 清零;restart 保持状态 |
| V5.7 | 球-膜粘附/脱粘 benchmark | examples/ball_adhesion_decohesion |
example_ball_adhesion_cohesive_benchmark |
peak pull-off 119.246023, min compression -362.051100, dissipated energy 0.451891017, final failed fraction 1.0 |
滞回面积、耗散能、损伤和脱粘面积通过 checker |
| V5.8 | 颗粒基础验收 | tests/module |
particle_acceptance, particle_fem_coupling |
free fall, wall collision, three-particle pile, particle-facet force balance | 质量守恒;重叠有界;耗散非负;facet 节点力平衡残差在容差内 |
| V5.8 | 动态颗粒柔性容器 benchmark | examples/Dynamic_Grain_Packing_of_a_Flexible_Container |
example_dynamic_grain_container_benchmark |
4 particles, 4 facet contacts, mapped_steps=40, max load 3.68E+01, min center uz=-7.29240354E-06, max overlap 3.00615680E-03 |
结构输入不得含 *DLOAD pressure surrogate;映射节点力和容器位移非零;质量守恒、重叠和能量通过 checker |
示例输出文件
| 示例目录 | 主要输出 | checker |
|---|---|---|
examples/contact_two_blocks_compression |
pressure_profile.csv, VTK |
check_contact_results.py |
examples/contact_block_sliding |
sliding_profile.csv, VTK |
check_contact_results.py |
examples/shell_shell_contact |
shell contact profile, VTK | check_contact_results.py |
examples/shell_solid_contact |
shell-solid contact profile, VTK | check_contact_results.py |
examples/strengthReduction |
strength_reduction_history.csv, summary, plastic_zone.csv, displacement_probe.csv |
check_strength_reduction_results.py |
examples/euler_column_buckling |
buckling_summary.csv, buckling_mode_1.csv |
check_buckling_results.py |
examples/buckling_corrugated_shell |
summary, wave sweep, modes, profile | check_buckling_results.py |
examples/roll_forming |
roller kinematics history/summary, springback history/summary, plastic_zone.csv |
check_roller_kinematics.py, check_springback_results.py |
examples/ball_adhesion_decohesion |
adhesion_history.csv, adhesion_summary.csv, decohesion_profile.csv |
check_cohesive_results.py |
examples/Dynamic_Grain_Packing_of_a_Flexible_Container |
grain_container_history.csv, grain_container_summary.csv |
check_grain_container_results.py |
Smoke 与 benchmark 边界
- V4 smoke 仍用于快速确认旧路径,例如动态颗粒容器目录中的 pressure/ground smoke、roll forming friction smoke 和 ball adhesion contact smoke。
- V5 完成项必须至少有模块级验收或示例级 checker;不能只依赖 smoke。
- benchmark 编排工具放在
tools/benchmarks,示例输入和 checker 放在对应examples/<case>/目录,生产功能代码仍保留在src。 - 当前模块不引入第三方 solver 或外部求解器进程;相关验收只覆盖内部 solver。
文档治理边界
- 状态标记只在
docs/v5_development_plan.md维护;本矩阵只记录可运行入口、 指标和容差,避免多个文档出现互相冲突的 PASS/PARTIAL 口径。 - 每次新增或修正 benchmark 时,必须同步本文件中的 CTest 名称、示例目录、 checker、参考指标和容差说明。
- 每次完成发布确认、多平台复测或 longrun 后,必须同步本文件的测试层级和
多平台复测矩阵,并同步
docs/v5_acceptance_report.md的验收结论。 - 若某项仅为 smoke、surrogate 或 debug fallback,不得在本矩阵中列为 V5 完成项;只能在边界说明或 DEFERRED/PARTIAL 说明中登记。