34 KiB
FEM Interface Control Document
文档状态:接口基线草稿
适用对象:船舶接触爆炸船体结构 FEM 核心库与小型分析程序
1. 文档目的
本文档定义 FEM 核心库对外暴露的调用接口、数组维度、编号规则、内存所有权、错误码、单位制和 SPH-FEM 耦合接口。
本文档是外部程序,特别是 SPH 程序,与 FemLite 进行联调时的接口合同。
2. 接口范围
第一版提供:
- Fortran95 原生接口。
- 显式瞬态动力学推进接口。
- Abaqus inp 模型读取接口。
- 外部 SPH 驱动接口。
- 节点力、facet 压力、facet 压力加剪切力接口。
- 节点运动学和单元平均结果查询接口。
- CSV 输出控制接口。
第二版提供:
- C ABI 包装层。
- Python 调试接口。
- 高斯点结果查询接口。
- VTK 和 restart 相关接口。
第三版提供:
- 线性静力求解接口。
- 非线性静力求解接口。
- 隐式 Newmark 动力学推进接口。
- 静力收敛历史查询接口。
- 节点反力查询接口。
- 接触状态、接触力和接触功查询接口。
第四版扩展:
- node-based surface、analytical rigid plane surface 和 contact property 查询/输入子集。
- contact pair active-set、gap residual 和 augmented penalty 诊断接口。
- contact pair 搜索统计接口,用于 V4.4 搜索/并行性能验收。
- 线性求解器设置和最近一次线性求解统计接口,用于 V4.6 内部/外部求解路径切换验收。
3. 接口设计原则
接口设计遵循:
- 第一版只承诺 Fortran95 原生接口。
- 不依赖 Fortran 2003
iso_c_binding。 - 不依赖面向对象类型绑定。
- 调用者不直接访问 FEM 内部数据库。
- 外部数组采用调用者分配。
- 查询类接口采用两步查询模式。
- 所有核心接口通过 ierr 返回错误状态。
- warning 只写入日志,不作为 ierr 返回。
- FEM 不做单位转换,调用者必须保证单位一致。
4. 编号与维度约定
4.1 编号约定
外部接口默认使用 Abaqus 原始编号:
- node_id 为 Abaqus 输入文件中的节点编号。
- elem_id 为 Abaqus 输入文件中的单元编号。
- facet_id 为 FEM 构造并导出的稳定 facet 编号。
内部可维护连续编号,并提供原始编号和内部编号之间的查询接口。
建议接口:
subroutine fem_get_internal_node_id(node_id_ext, node_id_int, ierr)
subroutine fem_get_internal_elem_id(elem_id_ext, elem_id_int, ierr)
subroutine fem_get_external_node_id(node_id_int, node_id_ext, ierr)
subroutine fem_get_external_elem_id(elem_id_int, elem_id_ext, ierr)
4.2 自由度约定
自由度编号:
1 UX
2 UY
3 UZ
4 RX
5 RY
6 RZ
节点力接口:
force(3,nnode)只作用于平动自由度 UX、UY、UZ。- 通用自由度接口使用
node_id + dof + value。
4.3 数组维度约定
接口数组采用 Fortran 列主序友好的维度:
coord(3,nnode)
velocity(3,nnode)
acceleration(3,nnode)
normal(3,nfacet)
force(3,nnode)
shear(3,nfacet)
conn(max_face_nodes,nfacet)
x(3,max_face_nodes,nfacet)
vnod(3,max_face_nodes,nfacet)
所有数组下标从 1 开始。
5. 字符串约定
文件名:
character(len=*), intent(in) :: filename
内部固定长度:
NAME_LEN = 80
ELEM_TYPE_LEN = 16
对外返回名称时,由调用者提供固定长度字符数组。
6. 内存所有权
第一版采用调用者分配数组的模式。
查询类接口采用两步流程:
1. 调用 fem_get_xxx_size 查询数量和最大维度
2. 调用者 allocate 所需数组
3. 调用 fem_get_xxx_data 填充数组
FEM 内部不返回由库内 allocate 的外部数组指针。
7. 库生命周期接口
标准生命周期:
subroutine fem_initialize(ierr)
integer, intent(out) :: ierr
end subroutine
subroutine fem_finalize(ierr)
integer, intent(out) :: ierr
end subroutine
调用规则:
fem_initialize必须在其他接口之前调用。fem_finalize负责释放 FEM 内部内存。- 多次重复初始化和释放应返回明确错误或在日志中记录状态。
8. 模型输入与构建接口
subroutine fem_read_inp(filename, ierr)
character(len=*), intent(in) :: filename
integer, intent(out) :: ierr
end subroutine
subroutine fem_build_model(ierr)
integer, intent(out) :: ierr
end subroutine
subroutine fem_compute_lumped_mass(ierr)
integer, intent(out) :: ierr
end subroutine
推荐调用顺序:
fem_initialize
fem_read_inp
fem_build_model
fem_compute_lumped_mass
说明:
fem_read_inp只负责读取和解析输入。fem_build_model负责内部编号、自由度、facet 和状态变量数据库构建。fem_compute_lumped_mass负责形成显式动力学所需集中质量。
9. 求解控制接口
subroutine fem_estimate_stable_dt(dtcrit, ierr)
real(rk), intent(out) :: dtcrit
integer, intent(out) :: ierr
end subroutine
subroutine fem_advance_explicit(dt, ierr)
real(rk), intent(in) :: dt
integer, intent(out) :: ierr
end subroutine
subroutine fem_get_current_time(time, step, ierr)
real(rk), intent(out) :: time
integer, intent(out) :: step
integer, intent(out) :: ierr
end subroutine
独立程序模式:
femlite读取 inp 后控制时间循环。- 输出由
femlite按控制参数调用。
外部 SPH 驱动模式:
fem_get_boundary_facets
external SPH calculation
fem_clear_sph_forces
fem_apply_sph_xxx
fem_advance_explicit(dt)
在 SPH 驱动模式下,时间步长由外部程序传入。
第三版静力和隐式动力接口:
subroutine fem_solve_static_linear(max_iter, tol, iter, res_norm, ierr)
integer, intent(in) :: max_iter
real(rk), intent(in) :: tol
integer, intent(out) :: iter
real(rk), intent(out) :: res_norm
integer, intent(out) :: ierr
end subroutine
subroutine fem_solve_static_nonlinear(max_increment, max_iter, tol, &
iter, res_norm, ierr)
integer, intent(in) :: max_increment
integer, intent(in) :: max_iter
real(rk), intent(in) :: tol
integer, intent(out) :: iter
real(rk), intent(out) :: res_norm
integer, intent(out) :: ierr
end subroutine
subroutine fem_advance_implicit_newmark(dt, max_iter, tol, iter, res_norm, ierr)
real(rk), intent(in) :: dt
integer, intent(in) :: max_iter
real(rk), intent(in) :: tol
integer, intent(out) :: iter
real(rk), intent(out) :: res_norm
integer, intent(out) :: ierr
end subroutine
subroutine fem_run_implicit_newmark(max_iter, tol, iter_total, res_norm, ierr)
integer, intent(in) :: max_iter
real(rk), intent(in) :: tol
integer, intent(out) :: iter_total
real(rk), intent(out) :: res_norm
integer, intent(out) :: ierr
end subroutine
subroutine fem_advance_newmark_nonlinear(dt, max_iter, tol, iter, res_norm, ierr)
real(rk), intent(in) :: dt
integer, intent(in) :: max_iter
real(rk), intent(in) :: tol
integer, intent(out) :: iter
real(rk), intent(out) :: res_norm
integer, intent(out) :: ierr
end subroutine
subroutine fem_run_newmark_nonlinear(max_iter, tol, iter_total, res_norm, ierr)
integer, intent(in) :: max_iter
real(rk), intent(in) :: tol
integer, intent(out) :: iter_total
real(rk), intent(out) :: res_norm
integer, intent(out) :: ierr
end subroutine
subroutine fem_set_rayleigh_damping(alpha_mass, beta_stiffness, ierr)
real(rk), intent(in) :: alpha_mass
real(rk), intent(in) :: beta_stiffness
integer, intent(out) :: ierr
end subroutine
说明:
- 静力接口不要求调用
fem_compute_lumped_mass。 - 隐式动力接口可复用质量矩阵、阻尼矩阵、CSR 矩阵和边界条件数据库。
fem_solve_static_linear与命令行--static-linear对应。--implicit-linear保留为--static-linear的兼容别名。fem_run_implicit_newmark使用输入文件中的时间控制运行到time_end。fem_run_newmark_nonlinear使用输入文件中的时间控制运行到time_end,对应命令行--implicit-newmark-nonlinear。fem_set_rayleigh_damping设置C = alpha_mass M + beta_stiffness K。- 非线性 Newmark Fortran95 接口当前接入实体 J2 算法切线、壳膜内/弯曲/剪切 J2/J2_JC section tangent、trial/restore/commit、线搜索、可选步长缩减、Robin/MPC 切线、刚性平面 penalty contact 切线和面-面 contact pair 切线;C ABI 和 Python 调试接口跟随扩展。
10. 载荷接口
10.1 外力清零
subroutine fem_clear_external_forces(ierr)
integer, intent(out) :: ierr
end subroutine
subroutine fem_clear_sph_forces(ierr)
integer, intent(out) :: ierr
end subroutine
SPH 耦合规则:
- 外部程序每个时间步显式调用
fem_clear_sph_forces。 - 然后调用 SPH 载荷施加接口。
- 最后调用
fem_advance_explicit(dt)。 fem_advance_explicit不应自动清除刚传入的fsph。
10.2 节点力
subroutine fem_apply_nodal_force(nnode_in, node_id, force, ierr)
integer, intent(in) :: nnode_in
integer, intent(in) :: node_id(nnode_in)
real(rk), intent(in) :: force(3,nnode_in)
integer, intent(out) :: ierr
end subroutine
说明:
node_id使用 Abaqus 原始节点编号。force使用全局坐标。- 只作用于平动自由度。
10.3 通用自由度载荷
subroutine fem_apply_dof_force(nitem, node_id, dof, value, ierr)
integer, intent(in) :: nitem
integer, intent(in) :: node_id(nitem)
integer, intent(in) :: dof(nitem)
real(rk), intent(in) :: value(nitem)
integer, intent(out) :: ierr
end subroutine
说明:
dof采用 1 到 6 的自由度编号。- 非激活自由度应返回错误。
11. SPH-FEM 耦合接口
11.1 facet 数量查询
subroutine fem_get_boundary_facet_count(nfacet, max_face_nodes, ierr)
integer, intent(out) :: nfacet
integer, intent(out) :: max_face_nodes
integer, intent(out) :: ierr
end subroutine
11.2 facet 数据查询
subroutine fem_get_boundary_facets(nfacet_in, max_face_nodes_in, &
facet_id, elem_id, face_id, facet_nnode, &
facet_conn, x, vnod, normal, area, ierr)
integer, intent(in) :: nfacet_in
integer, intent(in) :: max_face_nodes_in
integer, intent(out) :: facet_id(nfacet_in)
integer, intent(out) :: elem_id(nfacet_in)
integer, intent(out) :: face_id(nfacet_in)
integer, intent(out) :: facet_nnode(nfacet_in)
integer, intent(out) :: facet_conn(max_face_nodes_in,nfacet_in)
real(rk), intent(out) :: x(3,max_face_nodes_in,nfacet_in)
real(rk), intent(out) :: vnod(3,max_face_nodes_in,nfacet_in)
real(rk), intent(out) :: normal(3,nfacet_in)
real(rk), intent(out) :: area(nfacet_in)
integer, intent(out) :: ierr
end subroutine
说明:
elem_id使用 Abaqus 原始单元编号。facet_conn使用 Abaqus 原始节点编号。normal为固体外法向。- 删除单元对应 facet 不应作为有效 facet 导出。
- 外部程序接受
x(3,max_face_nodes,nfacet)和vnod(3,max_face_nodes,nfacet)三维数组。
11.3 SPH 节点力输入
subroutine fem_apply_sph_nodal_forces(nnode_in, node_id, force, ierr)
integer, intent(in) :: nnode_in
integer, intent(in) :: node_id(nnode_in)
real(rk), intent(in) :: force(3,nnode_in)
integer, intent(out) :: ierr
end subroutine
11.4 SPH facet 压力输入
subroutine fem_apply_sph_facet_pressure(nfacet_in, facet_id, pressure, ierr)
integer, intent(in) :: nfacet_in
integer, intent(in) :: facet_id(nfacet_in)
real(rk), intent(in) :: pressure(nfacet_in)
integer, intent(out) :: ierr
end subroutine
压力约定:
p > 0 means compression
t = -p n
11.5 SPH facet 压力与剪切输入
subroutine fem_apply_sph_facet_tractions(nfacet_in, facet_id, pressure, shear, ierr)
integer, intent(in) :: nfacet_in
integer, intent(in) :: facet_id(nfacet_in)
real(rk), intent(in) :: pressure(nfacet_in)
real(rk), intent(in) :: shear(3,nfacet_in)
integer, intent(out) :: ierr
end subroutine
剪切约定:
shear(3,nfacet)为全局坐标下的剪切牵引向量。- FEM 将
-p n + shear映射为 facet 等效节点力。
12. 结果查询接口
12.1 节点运动学
subroutine fem_get_nodal_kinematics(nnode_in, node_id, uout, vout, aout, ierr)
integer, intent(in) :: nnode_in
integer, intent(in) :: node_id(nnode_in)
real(rk), intent(out) :: uout(3,nnode_in)
real(rk), intent(out) :: vout(3,nnode_in)
real(rk), intent(out) :: aout(3,nnode_in)
integer, intent(out) :: ierr
end subroutine
说明:
- 第一版只返回平动位移、速度、加速度。
- 壳节点转角查询可在第二版扩展。
12.2 单元状态
subroutine fem_get_element_status(nelem_in, elem_id, status, ierr)
integer, intent(in) :: nelem_in
integer, intent(in) :: elem_id(nelem_in)
integer, intent(out) :: status(nelem_in)
integer, intent(out) :: ierr
end subroutine
状态约定:
0 active
1 deleted
2 inactive by input
12.3 单元平均结果
subroutine fem_get_element_average_state(nelem_in, elem_id, stress, strain, &
plastic_strain, eqps, damage, ierr)
integer, intent(in) :: nelem_in
integer, intent(in) :: elem_id(nelem_in)
real(rk), intent(out) :: stress(6,nelem_in)
real(rk), intent(out) :: strain(6,nelem_in)
real(rk), intent(out) :: plastic_strain(6,nelem_in)
real(rk), intent(out) :: eqps(nelem_in)
real(rk), intent(out) :: damage(nelem_in)
integer, intent(out) :: ierr
end subroutine
说明:
- 第一版返回单元平均值。
- 高斯点查询作为第二版高级接口实现。
12.4 节点反力
第三版提供节点反力查询:
subroutine fem_get_nodal_reactions(nnode_in, node_id, reaction, ierr)
integer, intent(in) :: nnode_in
integer, intent(in) :: node_id(nnode_in)
real(rk), intent(out) :: reaction(6,nnode_in)
integer, intent(out) :: ierr
end subroutine
说明:
reaction(1:3,:)为平动反力。reaction(4:6,:)为转动反力或力矩。- 实体单元未激活转动自由度时,对应分量返回 0。
12.5 静力收敛历史
第三版提供当前或最近一次静力/隐式求解收敛状态查询:
subroutine fem_get_convergence_status(increment, iteration, residual_norm, &
correction_norm, converged, ierr)
integer, intent(out) :: increment
integer, intent(out) :: iteration
real(rk), intent(out) :: residual_norm
real(rk), intent(out) :: correction_norm
logical, intent(out) :: converged
integer, intent(out) :: ierr
end subroutine
subroutine fem_get_convergence_metrics(relative_residual_norm, &
contact_gap_norm, combined_norm, ierr)
real(rk), intent(out) :: relative_residual_norm
real(rk), intent(out) :: contact_gap_norm
real(rk), intent(out) :: combined_norm
integer, intent(out) :: ierr
end subroutine
subroutine fem_get_convergence_diagnostics(cutback_count, last_dt, &
last_accepted_time, status_code, &
failure_code, ierr)
integer, intent(out) :: cutback_count
real(rk), intent(out) :: last_dt
real(rk), intent(out) :: last_accepted_time
integer, intent(out) :: status_code
integer, intent(out) :: failure_code
integer, intent(out) :: ierr
end subroutine
说明:
increment为最近一次静力/隐式求解尝试的实际步号或增量号。iteration为该增量内最近一次 Newton 迭代号;求解尚未开始时为 0。residual_norm为最近一次力残差范数。correction_norm为最近一次位移修正范数;线性路径或尚未形成修正时为 0。converged表示最近一次记录的增量是否已满足收敛准则。relative_residual_norm为力残差相对参考外力范数的比值。contact_gap_norm为最近一次接触力评估中的最大 contact gap residual。combined_norm为相对力残差、位移修正范数和 contact gap residual 的最大值,用于统一诊断多准则收敛状态。cutback_count为最近一次静力/非线性 Newmark 运行累计触发的步长缩减次数。last_dt为最近一次记录的静力增量长度或 Newmark 时间步长。last_accepted_time为最近一次已提交成功的求解时间;失败并回滚时保持为最后有效时间。status_code使用CONVERGENCE_STATUS_IDLE=0、ITERATING=1、CONVERGED=2、CUTBACK=3、FAILED=-1。failure_code使用CONV_FAIL_NONE=0、CONV_FAIL_NONCONVERGENCE=1、CONV_FAIL_CUTBACK_LIMIT=2、CONV_FAIL_STOPPED=3。- V4.5 起,非线性静力 Newton 迭代、静力 cutback 失败路径、非线性 Newmark cutback 运行和接触力评估会更新该状态;contact gap/mortar residual 当前作为 diagnostics 进入多准则统计,硬收敛判据仍以力残差为主。
12.6 线性求解器控制
V4.6 提供内部线性求解器配置和最近一次求解统计查询:
subroutine fem_set_linear_solver(method, preconditioner, ierr)
integer, intent(in) :: method
integer, intent(in) :: preconditioner
integer, intent(out) :: ierr
end subroutine
subroutine fem_get_linear_solver_settings(method, preconditioner, ierr)
integer, intent(out) :: method
integer, intent(out) :: preconditioner
integer, intent(out) :: ierr
end subroutine
subroutine fem_get_linear_solver_stats(method, preconditioner, iteration, &
residual_norm, status_code, ierr)
integer, intent(out) :: method
integer, intent(out) :: preconditioner
integer, intent(out) :: iteration
real(rk), intent(out) :: residual_norm
integer, intent(out) :: status_code
integer, intent(out) :: ierr
end subroutine
说明:
method使用LSOLVER_CG=1、LSOLVER_BICGSTAB=2、LSOLVER_EXTERNAL=100。preconditioner使用LPRECOND_NONE=0、LPRECOND_JACOBI=1。status_code使用LS_STATUS_IDLE=0、LS_STATUS_CONVERGED=1、LS_STATUS_FAILED=-1、LS_STATUS_UNSUPPORTED=-2。LSOLVER_EXTERNAL仅作为外部稀疏求解器预留路径;当前配置可记录,但实际求解返回 unsupported。- 静力、隐式 Newmark 和非线性 Newton 修正方程均通过同一分发层求解。
12.7 接触状态
第三版提供接触结果查询接口:
subroutine fem_get_contact_summary(active_count, work_step, work_total, &
max_penetration, force_norm, ierr)
integer, intent(out) :: active_count
real(rk), intent(out) :: work_step
real(rk), intent(out) :: work_total
real(rk), intent(out) :: max_penetration
real(rk), intent(out) :: force_norm
integer, intent(out) :: ierr
end subroutine
第四版追加接触诊断查询接口,不改变旧 summary 接口:
subroutine fem_get_contact_diagnostics(active_pair_count, &
activated_pair_count, &
maintained_pair_count, &
released_pair_count, &
max_gap_residual, max_aug_lambda, ierr)
integer, intent(out) :: active_pair_count
integer, intent(out) :: activated_pair_count
integer, intent(out) :: maintained_pair_count
integer, intent(out) :: released_pair_count
real(rk), intent(out) :: max_gap_residual
real(rk), intent(out) :: max_aug_lambda
integer, intent(out) :: ierr
end subroutine
active_pair_count:最近一次接触力评估中至少有一个激活贡献的 contact pair 数。activated_pair_count:本次由 open 切换为 active 的 pair 数。maintained_pair_count:本次保持 active 的 pair 数。released_pair_count:本次由 active 切换为 open 的 pair 数。max_gap_residual:逐 pair gap 残差最大值,当前定义为最近一次力评估中的最大穿透量。max_aug_lambda:逐 pair augmented penalty 法向乘子最大值。
第四版 V4.3 起步追加摩擦输出查询接口:
subroutine fem_get_contact_friction(work_step, work_total, &
max_accumulated_slip, ierr)
real(rk), intent(out) :: work_step
real(rk), intent(out) :: work_total
real(rk), intent(out) :: max_accumulated_slip
integer, intent(out) :: ierr
end subroutine
work_step:最近一次接触评估中的正摩擦耗散功估计。work_total:累计正摩擦耗散功估计。max_accumulated_slip:逐 contact pair 累计滑移最大值。
V4.3 进一步追加 mortar 积分点级历史统计接口:
subroutine fem_get_contact_hist_stats(slot_count, max_slot_slip, &
max_slot_work, max_tangent_force, ierr)
integer, intent(out) :: slot_count
real(rk), intent(out) :: max_slot_slip
real(rk), intent(out) :: max_slot_work
real(rk), intent(out) :: max_tangent_force
integer, intent(out) :: ierr
end subroutine
slot_count:当前模型内已创建的 mortar 积分点摩擦历史槽数量。max_slot_slip:单个历史槽的最大累计滑移。max_slot_work:单个历史槽的最大累计摩擦功。max_tangent_force:单个历史槽中历史切向力模长最大值。- 当前历史槽键为
pair + slave element/face + master element/face + point_id,其中point_id是该 slave/master facet overlap 内的 mortar 积分点序号。
V4.4 起步追加 contact pair 搜索统计接口:
subroutine fem_get_contact_search_stats(facet_count, master_count, &
broad_count, active_count, &
bvh_node_count, ierr)
integer, intent(out) :: facet_count
integer, intent(out) :: master_count
integer, intent(out) :: broad_count
integer, intent(out) :: active_count
integer, intent(out) :: bvh_node_count
integer, intent(out) :: ierr
end subroutine
facet_count:最近一次接触力评估中累计处理的 boundary facet 数;多 contact pair 时按 pair 评估次数累计。master_count:最近一次接触力评估中累计识别的 master facet 数。broad_count:搜索第一遍候选评估次数;全搜索、uniform grid 和 BVH 路径均记录。active_count:候选评估中判定为接触激活的次数。bvh_node_count:最近一次接触力评估累计构建的 BVH 节点数;非 BVH 路径为 0。
V4.4 追加接触性能计时接口,时间单位为秒,口径为 Fortran cpu_time:
subroutine fem_get_contact_perf_stats(search_time, force_time, &
tangent_time, ierr)
real(rk), intent(out) :: search_time
real(rk), intent(out) :: force_time
real(rk), intent(out) :: tangent_time
integer, intent(out) :: ierr
end subroutine
search_time:最近一次接触状态周期内 contact pair 搜索准备和第一遍候选评估累计 CPU 时间。force_time:最近一次contact_apply_plane_forces总 CPU 时间。tangent_time:最近一次接触切线装配累计 CPU 时间;若未调用切线装配则为 0。
V4.4 追加 BVH 局部候选缓存统计接口:
subroutine fem_get_contact_cache_stats(used_count, overflow_count, ierr)
integer, intent(out) :: used_count
integer, intent(out) :: overflow_count
integer, intent(out) :: ierr
end subroutine
used_count:最近一次接触力评估中使用 BVH active 候选缓存施力的 slave facet 数。overflow_count:active 候选数超过固定缓存容量并回退到旧 BVH 遍历施力路径的 slave facet 数。
Restart 说明:
- restart 文件格式从 V4.3 起写出为
FEMLITE_RESTART 2。 - v2 在 DOF、单元状态和高斯点状态之后追加
CONTACT_HISTORY段,用于保存 mortar 积分点摩擦历史槽。 - 读入端兼容旧的 v1 文件;若旧文件没有
CONTACT_HISTORY段,则读入时清空当前接触历史。
第三版当前 contact pair 支持两种配置方式:
- INP 文件中的 FemLite 子集:
*CONTACT PAIR, SLAVE=slave_target, MASTER=master_target, PENALTY=value, DAMPING=value, SEARCH=value, FRICTION=value, FRICTION_REGULARIZATION=value, AUGMENT=value
- header 式写法中,
SLAVE、MASTER和PENALTY为必填参数。 DAMPING、SEARCH、FRICTION、FRICTION_REGULARIZATION和AUGMENT为可选参数,未给出时默认为 0。SLAVE和MASTER可为 surface 名称、elset 名称、element id 字符串或ALL。- 解析器接受大小写混用、参数等号两侧空格以及单/双引号包裹的名称。
也支持 Abaqus 常见的数据行式 contact pair 子集:
*SURFACE, NAME=slave_surface, TYPE=ELEMENT
slave_elset_or_element, face_label
*SURFACE, NAME=master_surface, TYPE=ELEMENT
master_elset_or_element, face_label
*CONTACT PAIR, PENALTY=value, DAMPING=value, SEARCH=value, FRICTION=value, FRICTION_REGULARIZATION=value
slave_surface, master_surface
*SURFACE当前支持TYPE=ELEMENT、TYPE=NODE和 analytical rigidPLANE子集;TYPE可省略,缺省为ELEMENT。OP可省略或写为ADD/NEW:省略时按ADD处理;同名 surface 的ADD会追加数据行,NEW会清除该 surface 已有数据行后重新定义。- surface 可包含多条数据行;每行第一个字段可为 elset 名称或 element id,二者可在同一 surface 中混用。
- 第二字段
face_label可省略;省略、ALL或EXTERIOR表示该 target 的所有候选 facet 均可匹配。 - 当前支持
S1、S2等面号标签,以及F1、FACE1等等价写法;壳单元支持SPOS/SNEG匹配其当前单一 shell facet。 SPOS/SNEG已参与接触计算语义:master surface 的SNEG会翻转有效接触法向;slave surface 若显式给出SPOS/SNEG,候选接触只接受该侧法向朝向 master facet 的组合。- 更完整的 Abaqus surface 变体、曲线/球/柱 analytical surface 和更复杂的数据行变体仍列入后续版本。
- 数据行式
*CONTACT PAIR的 header 中仍要求PENALTY,slave/master 从下一行读取。
- Fortran95 核心数据库接口:
subroutine database_allocate_surfaces(num_surfaces, num_items, ierr)
integer, intent(in) :: num_surfaces
integer, intent(in) :: num_items
integer, intent(out) :: ierr
end subroutine
subroutine database_allocate_contact_pair(num_pairs, ierr)
integer, intent(in) :: num_pairs
integer, intent(out) :: ierr
end subroutine
配置数组包括:
surface_name(surface):surface 名称。surface_start(surface)、surface_count(surface):surface 数据行在 item 表中的起始位置和数量;当同名 surface 经过OP=ADD非连续追加时,surface_count表示有效 item 数量。surface_owner(item):surface item 所属 surface 编号;为 0 表示该 item 已被OP=NEW覆盖失效。surface_target(item):surface 数据行的 elset 名称或 element id 字符串。surface_face(item):surface 数据行的 face label,用于实际接触候选 facet 筛选。contact_pair_slave(pair):slave 接触目标,可为 surface 名称、elset 名称、element id 字符串或ALL。contact_pair_master(pair):master 接触目标,可为 surface 名称、elset 名称、element id 字符串或ALL。contact_pair_penalty(pair):法向 penalty 刚度,必须大于 0。contact_pair_damping(pair):法向阻尼,必须非负。contact_pair_search(pair):搜索距离,0 表示只按 facet 等效半径过滤。contact_pair_friction(pair):Coulomb 摩擦系数,必须非负;0 表示无摩擦。contact_pair_friction_reg(pair):摩擦正则化滑移尺度,必须非负;0 表示经典 Coulomb 截断。contact_pair_aug_factor(pair):augmented penalty 更新系数,必须非负;0 表示仅使用 penalty。
当前 contact pair 支持投影裁剪 mortar 形函数积分、多 master facet 面积上限修正、Coulomb 粘滑历史、均匀空间网格候选搜索、OpenMP BVH 宽相搜索和 facet 空间 broad-phase 精筛。
接触统计包括:
contact_active_count:最近一次接触力评估中的激活贡献数。contact_work_step:最近一次接触力评估的接触功估计。contact_work_total:累计接触功估计。contact_max_penetration:最近一次接触力评估的最大穿透量。contact_force_norm:最近一次接触力评估的接触力范数累加。
逐 contact pair 统计保存在 contact_pair_active/work/max_penetration/force_norm、contact_pair_status/activation_count/release_count/gap_residual/aug_lambda、contact_pair_stick_count/slip_count/slip/tangent_force、contact_pair_friction_work/fric_work_total 数组中,并写入 contact_XXXXXXXX.csv。V4.4 起,contact CSV 的 SUMMARY 行写出 search_facets/search_masters/search_candidates/search_active/search_bvh_nodes 全局搜索统计、search_cache_used/search_cache_overflow 缓存统计,以及 search_cpu_time/contact_force_cpu_time/contact_tangent_cpu_time 计时统计;逐 PAIR 行通过内部 Fortran 查询 contact_get_pair_stats 写出对应接触对的搜索、缓存和计时统计。当前 C ABI 只暴露全局 search/perf/cache 统计,pair 级查询先作为 Fortran 内部接口和 CSV 输出提供。
13. 输出控制接口
subroutine fem_set_output_directory(path, ierr)
character(len=*), intent(in) :: path
integer, intent(out) :: ierr
end subroutine
subroutine fem_set_output_interval(interval, ierr)
integer, intent(in) :: interval
integer, intent(out) :: ierr
end subroutine
subroutine fem_write_output(step, time, ierr)
integer, intent(in) :: step
real(rk), intent(in) :: time
integer, intent(out) :: ierr
end subroutine
说明:
- 第一版输出 CSV 和日志。
- 第二版扩展 VTK 和 restart。
- 第三版扩展静力收敛历史、反力和接触结果输出。
- 外部程序可关闭自动输出并显式调用
fem_write_output。
14. 版本与错误查询接口
14.1 版本查询
subroutine fem_get_version(major, minor, patch, ierr)
integer, intent(out) :: major
integer, intent(out) :: minor
integer, intent(out) :: patch
integer, intent(out) :: ierr
end subroutine
14.2 错误查询
subroutine fem_get_last_error(code, message, ierr)
integer, intent(out) :: code
character(len=*), intent(out) :: message
integer, intent(out) :: ierr
end subroutine
错误返回规则:
ierr = 0表示成功。ierr > 0表示错误。- warning 只写日志,不作为 ierr 返回。
- 发生错误后,
fem_get_last_error可返回最近一次错误码和错误信息。
错误码分组:
0 success
1000 input errors
2000 mesh and dof errors
3000 material and state errors
4000 solver errors
5000 coupling errors
6000 output errors
9000 internal errors
15. 单位制约定
FemLite 不进行单位转换。
调用者必须保证以下数据采用一致单位制:
- Abaqus inp 几何尺寸
- 材料密度
- 弹性和塑性参数
- 时间步长
- 节点力
- 压力
- 剪切牵引
- SPH 传入数据
- 输出解释
日志中应记录单位制不检查的提示。
16. 第一版典型调用流程
16.1 独立 FEM 程序流程
fem_initialize
fem_read_inp
fem_build_model
fem_compute_lumped_mass
loop:
fem_estimate_stable_dt
fem_advance_explicit
fem_write_output
fem_finalize
16.2 SPH 驱动流程
fem_initialize
fem_read_inp
fem_build_model
fem_compute_lumped_mass
loop:
fem_get_boundary_facet_count
allocate external arrays if needed
fem_get_boundary_facets
SPH computes pressure, shear or nodal force
fem_clear_sph_forces
fem_apply_sph_facet_pressure / fem_apply_sph_facet_tractions / fem_apply_sph_nodal_forces
fem_advance_explicit(dt)
fem_get_nodal_kinematics if needed
fem_finalize
17. C/C++/Python 包装层规划
第二版提供:
- C ABI 包装层。
- Python 调试接口。
- 面向 C/C++ 的扁平化数组接口。
包装层原则:
- 不改变 Fortran95 原生接口的物理含义。
- 不改变压力、剪切、编号和单位制约定。
- 对三维数组接口提供扁平化视图。
- 包装层单独测试,不污染 FEM 核心。
第三版包装层扩展:
- C ABI 暴露静力求解、反力查询和收敛状态查询。
- Python 调试接口支持运行静力算例并导出关键位移、反力和残差历史。
第四版包装层扩展:
- C ABI 追加
femlite_get_contact_diagnostics,返回 active pair 数、activated/maintained/released pair 数、最大 gap residual 和最大 augmented penalty 乘子。 - C ABI 追加
femlite_get_contact_friction_summary,返回摩擦 step/total 功和最大累计滑移。 - C ABI 追加
femlite_get_contact_history_stats,返回 mortar 积分点摩擦历史槽数量、单槽最大累计滑移、单槽最大累计摩擦功和单槽最大切向力模长。 - C ABI 追加
femlite_get_contact_search_stats,返回 contact pair 搜索 facet/master/candidate/active/BVH 节点统计。 - C ABI 追加
femlite_get_contact_perf_stats,返回 contact search/force/tangent CPU 时间统计。 - C ABI 追加
femlite_get_contact_cache_stats,返回 BVH 候选缓存使用和溢出统计。 - C ABI 暴露
femlite_get_convergence_status,其中converged使用int返回 0/1。 - C ABI 暴露
femlite_get_convergence_metrics,返回相对力残差、contact gap residual 和 combined norm。 - C ABI 暴露
femlite_get_convergence_diagnostics,返回 cutback 次数、最后步长、最后有效时间、收敛状态码和失败原因码。 - C ABI 暴露
femlite_set_linear_solver、femlite_get_linear_solver_settings和femlite_get_linear_solver_stats,返回/设置值与 Fortran API 常量一致。 - 上述函数只追加新符号,不改变
femlite_get_contact_summary的签名和含义。