Files
FemLite/tests/module/test_shell_pressure.f90

274 lines
7.9 KiB
Fortran

program test_shell_pressure
use fem_precision
use fem_error
use fem_database
use fem_boundary
use fem_sparse_csr
use fem_assembly_csr
use fem_dload_tangent
implicit none
real(rk), parameter :: TOL = 1.0e-10_rk
real(rk), parameter :: FD_TOL = 1.0e-8_rk
real(rk), parameter :: PRESSURE = 2.0_rk
call check_shell_pressure('S3', 3, HALF, 10)
call check_shell_pressure('S4', 4, ONE, 40)
call check_shell_pressure('S6', 6, HALF, 70)
call check_shell_pressure('S8', 8, ONE, 100)
call check_s4_pressure_tangent()
contains
subroutine check_shell_pressure(etype, nlocal, area, code)
character(len=*), intent(in) :: etype
integer, intent(in) :: nlocal
real(rk), intent(in) :: area
integer, intent(in) :: code
integer :: ierr
real(rk) :: total_force(NDIM)
character(len=ELEM_TYPE_LEN) :: local_type
call setup_shell(etype, nlocal, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(code)
call boundary_apply_prescribed_loads(ZERO, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(code + 1)
call collect_total_force(total_force)
call check_close(total_force(1), ZERO, code + 2)
call check_close(total_force(2), ZERO, code + 3)
call check_close(total_force(3), -PRESSURE * area, code + 4)
call check_rotational_force_is_zero(code + 5)
local_type = adjustl(etype)
select case (trim(local_type))
case ('S3')
call check_node_force_z(1, -PRESSURE * area / 3.0_rk, code + 6)
call check_node_force_z(3, -PRESSURE * area / 3.0_rk, code + 7)
case ('S4')
call check_node_force_z(1, -PRESSURE * area / 4.0_rk, code + 6)
call check_node_force_z(4, -PRESSURE * area / 4.0_rk, code + 7)
case ('S6')
call check_node_force_z(1, ZERO, code + 6)
call check_node_force_z(4, -PRESSURE * area / 3.0_rk, code + 7)
call check_node_force_z(6, -PRESSURE * area / 3.0_rk, code + 8)
case ('S8')
call check_node_force_z(1, PRESSURE / 12.0_rk, code + 6)
call check_node_force_z(5, -PRESSURE / 3.0_rk, code + 7)
call check_node_force_z(8, -PRESSURE / 3.0_rk, code + 8)
end select
call database_finalize(ierr)
if (ierr .ne. FEM_SUCCESS) call fail(code + 20)
end subroutine check_shell_pressure
subroutine check_s4_pressure_tangent()
type(csr_matrix) :: kmat
real(rk), allocatable :: f_base(:)
real(rk), allocatable :: f_plus(:)
real(rk), allocatable :: delta(:)
real(rk), allocatable :: kdelta(:)
real(rk) :: eps
real(rk) :: err_norm
real(rk) :: ref_norm
integer :: ierr
integer :: stat
integer :: dof
call setup_shell('S4', 4, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(130)
allocate(f_base(ndof), f_plus(ndof), delta(ndof), kdelta(ndof), stat=stat)
if (stat .ne. 0) call fail(131)
f_base = ZERO
f_plus = ZERO
delta = ZERO
kdelta = ZERO
eps = 1.0e-7_rk
call boundary_apply_prescribed_loads(ZERO, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(132)
f_base = fext
call csr_init(kmat)
call assembly_build_csr_pattern(kmat, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(133)
call dload_apply_tangent(kmat, ZERO, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(134)
dof = dof_id(3,2)
if (dof .le. 0) call fail(135)
delta(dof) = eps
u(dof) = u(dof) + eps
call boundary_apply_prescribed_loads(ZERO, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(136)
f_plus = fext
call csr_matvec(kmat, delta, kdelta, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(137)
err_norm = sqrt(sum((kdelta + f_plus - f_base) * &
(kdelta + f_plus - f_base)))
ref_norm = max(ONE, sqrt(sum((f_plus - f_base) * (f_plus - f_base))))
if (err_norm .gt. FD_TOL * ref_norm) call fail(138)
call csr_free(kmat, ierr)
if (ierr .ne. FEM_SUCCESS) call fail(139)
deallocate(f_base, f_plus, delta, kdelta)
call database_finalize(ierr)
if (ierr .ne. FEM_SUCCESS) call fail(140)
end subroutine check_s4_pressure_tangent
subroutine setup_shell(etype, nlocal, ierr)
character(len=*), intent(in) :: etype
integer, intent(in) :: nlocal
integer, intent(out) :: ierr
call database_allocate_model(nlocal, 1, 0, 1, 0, 1, 1, 0, 1, &
0, 0, 0, 0, 1, ierr)
if (ierr .ne. FEM_SUCCESS) return
call fill_common_model(etype, nlocal)
call fill_shell_coordinates(etype)
coord = coord0
dload_target(1) = '1'
dload_label(1) = 'P'
dload_value(1) = PRESSURE
dload_amp(1) = 0
call database_assign_dofs(ierr)
end subroutine setup_shell
subroutine fill_common_model(etype, nlocal)
character(len=*), intent(in) :: etype
integer, intent(in) :: nlocal
integer :: i
do i = 1, nlocal
node_id_ext(i) = i
coord0(:,i) = ZERO
coord(:,i) = ZERO
elem_conn(i,1) = i
end do
elem_id_ext(1) = 1
elem_type(1) = etype
elem_nnode(1) = nlocal
elem_mat(1) = 1
elem_sec(1) = 1
elset_name(1) = 'EALL'
elset_start(1) = 1
elset_count(1) = 1
elset_items(1) = 1
mat_name(1) = 'MAT'
mat_density(1) = ONE
mat_e(1) = ONE
mat_nu(1) = 0.25_rk
section_type(1) = 'SHELL'
section_elset_name(1) = 'EALL'
section_material_name(1) = 'MAT'
section_thickness(1) = ONE
end subroutine fill_common_model
subroutine fill_shell_coordinates(etype)
character(len=*), intent(in) :: etype
character(len=ELEM_TYPE_LEN) :: local_type
local_type = adjustl(etype)
select case (trim(local_type))
case ('S3')
call fill_triangle3()
case ('S4')
call fill_quad4()
case ('S6')
call fill_triangle6()
case ('S8')
call fill_quad8()
case default
call fail(900)
end select
end subroutine fill_shell_coordinates
subroutine fill_triangle3()
coord0(:,1) = (/ ZERO, ZERO, ZERO /)
coord0(:,2) = (/ ONE, ZERO, ZERO /)
coord0(:,3) = (/ ZERO, ONE, ZERO /)
end subroutine fill_triangle3
subroutine fill_triangle6()
call fill_triangle3()
coord0(:,4) = HALF * (coord0(:,1) + coord0(:,2))
coord0(:,5) = HALF * (coord0(:,2) + coord0(:,3))
coord0(:,6) = HALF * (coord0(:,3) + coord0(:,1))
end subroutine fill_triangle6
subroutine fill_quad4()
coord0(:,1) = (/ ZERO, ZERO, ZERO /)
coord0(:,2) = (/ ONE, ZERO, ZERO /)
coord0(:,3) = (/ ONE, ONE, ZERO /)
coord0(:,4) = (/ ZERO, ONE, ZERO /)
end subroutine fill_quad4
subroutine fill_quad8()
call fill_quad4()
coord0(:,5) = HALF * (coord0(:,1) + coord0(:,2))
coord0(:,6) = HALF * (coord0(:,2) + coord0(:,3))
coord0(:,7) = HALF * (coord0(:,3) + coord0(:,4))
coord0(:,8) = HALF * (coord0(:,4) + coord0(:,1))
end subroutine fill_quad8
subroutine collect_total_force(total_force)
real(rk), intent(out) :: total_force(NDIM)
integer :: node
integer :: idir
total_force = ZERO
do node = 1, nnode
do idir = 1, NDIM
total_force(idir) = total_force(idir) + fext(dof_id(idir,node))
end do
end do
end subroutine collect_total_force
subroutine check_rotational_force_is_zero(code)
integer, intent(in) :: code
integer :: node
integer :: idir
do node = 1, nnode
do idir = 4, NDOF_NODE
if (abs(fext(dof_id(idir,node))) .gt. TOL) call fail(code)
end do
end do
end subroutine check_rotational_force_is_zero
subroutine check_node_force_z(node, expected, code)
integer, intent(in) :: node
real(rk), intent(in) :: expected
integer, intent(in) :: code
call check_close(fext(dof_id(3,node)), expected, code)
end subroutine check_node_force_z
subroutine check_close(actual, expected, code)
real(rk), intent(in) :: actual
real(rk), intent(in) :: expected
integer, intent(in) :: code
if (abs(actual - expected) .gt. TOL * max(ONE, abs(expected))) call fail(code)
end subroutine check_close
subroutine fail(code)
integer, intent(in) :: code
write(*,*) 'test_shell_pressure failed:', code
stop 1
end subroutine fail
end program test_shell_pressure