Files
FemLite/examples/mohr_coulomb_yield_surface/README.md
T

42 lines
1.5 KiB
Markdown

# Mohr-Coulomb Yield Surface Benchmark
This example validates the production Mohr-Coulomb constitutive yield envelope
without using a structural mesh as the primary result source. The benchmark
driver samples the triaxial compression/extension envelope and the tension
cutoff, then evaluates representative stress points against the production
`material_mc_yield_values` and `fem_material_mc_envelope` helpers.
Material:
- `E = 1000`
- `nu = 0.25`
- `c = 10`
- `phi = 30 deg`
- `psi = 5 deg`
- `tension cutoff = 2`
Files:
- `mc_yield_surface_material.inp`: minimal material-definition input that keeps
the example layout concrete and documents the benchmark material.
- `check_mc_yield_surface_results.py`: runs the benchmark executable and checks
the generated CSV files against independent analytic formulas.
- `run_case.bat`: double-click runner.
Generated outputs:
- `yield_surface.csv`: confining stress samples for the compression envelope,
extension envelope and tension cap for strength factors `1` and `2`.
- `yield_points.csv`: elastic, shear, tension and mixed branch stress-point
classifications with yield functions, margins and safety ratio.
- `yield_summary.csv`: row counts, branch counts and maximum formula error.
Acceptance checks:
- Compression envelope follows `sigma_c = N_phi sigma_3 + 2 c sqrt(N_phi)`.
- Extension branch and tension cutoff follow the same reduced material
parameters.
- Strength reduction lowers compression and tension capacity.
- Representative stress points activate elastic, shear, tension and mixed
branches.