33 lines
1.3 KiB
Markdown
33 lines
1.3 KiB
Markdown
# Stress Dependent Elasticity
|
|
|
|
This folder follows the COMSOL reference note
|
|
`models.sme.stress_dependent_elasticity.pdf` as a nonlinear FemLite example:
|
|
|
|
- `generate_stress_dependent_elasticity.py`: regenerates the structured solid
|
|
beam deck and consistent right-end moment loads.
|
|
- `stress_dependent_elasticity.inp`: 0.10 m x 0.01 m unit-thickness cantilever
|
|
with a stress-dependent elastic modulus. The generated verification mesh uses
|
|
`NX=20, NY=1, NZ=10` C3D8 elements.
|
|
- `check_stress_dependent_results.py`: runs FemLite and checks the neutral-axis
|
|
shift and compression/tension stress asymmetry.
|
|
- `run_case.bat`: convenience launcher for local runs.
|
|
|
|
The material uses a pressure-dependent Young's modulus: 300 MPa in tension,
|
|
700 MPa in compression, Poisson ratio 0.30, and a 1 kPa transition zone. The
|
|
right end carries the reference bending moment `-5/3 N*m`; the left end is
|
|
fixed. The checker verifies that the computed bending stress crosses zero away
|
|
from the mid-height line and that the stiffer compression band is thinner and
|
|
has the larger peak axial stress.
|
|
|
|
The nonlinear run uses automatic cutback, `--max-newton 80`, and
|
|
`--newton-tol 1e-4`; those settings keep the pressure-dependent modulus switch
|
|
stable while preserving the reference bending response.
|
|
|
|
Run:
|
|
|
|
```bat
|
|
run_case.bat
|
|
```
|
|
|
|
Results are written to `results\auto_run`.
|