Advance Explosive reactions

This commit is contained in:
Codex
2026-07-03 12:11:47 +08:00
parent 4b95609d14
commit 5853ac2644
3 changed files with 242 additions and 22 deletions
+213 -2
View File
@@ -5,9 +5,11 @@ module sph_explosive
use sph_database, only: SPH_MAX_MATERIALS, SPH_MAX_SECTIONS, material_count, &
material_name, material_type, material_density, section_count, &
section_material_id, npart, particle_phase, particle_status, &
material_id, x0, SPH_PHASE_EXPLOSIVE, SPH_STATUS_ACTIVE
material_id, x0, v, mass, rho, volume, internal_energy, &
SPH_PHASE_EXPLOSIVE, SPH_PHASE_GAS, SPH_STATUS_ACTIVE
use sph_gas, only: sph_gas_table_index_by_material_id, &
gas_material_eos_defined
gas_material_eos_defined, sph_gas_clear_sources, &
sph_gas_add_source_by_particle
implicit none
integer, parameter :: EXPLOSIVE_CONVERSION_NONE = 0
@@ -37,6 +39,7 @@ module sph_explosive
real(rk), allocatable :: explosive_released_mass(:)
real(rk), allocatable :: explosive_released_energy(:)
real(rk), allocatable :: explosive_released_momentum(:,:)
real(rk) :: explosive_dt_reaction = 0.0_rk
contains
@@ -68,6 +71,7 @@ contains
explosive_ignition_material_id = 0
explosive_ignition_x = 0.0_rk
explosive_ignition_time = 0.0_rk
explosive_dt_reaction = 0.0_rk
end subroutine sph_explosive_clear_material_table
subroutine sph_explosive_finalize()
@@ -84,6 +88,8 @@ contains
call sph_explosive_allocate_state(ierr)
if (ierr /= SPH_SUCCESS) return
call sph_explosive_clear_particle_state()
call sph_explosive_apply_initial_conditions(ierr)
if (ierr /= SPH_SUCCESS) return
call sph_explosive_compute_detonation_times(ierr)
end subroutine sph_explosive_build
@@ -348,6 +354,187 @@ contains
end do
end subroutine sph_explosive_compute_detonation_times
subroutine sph_explosive_apply_initial_conditions(ierr)
integer, intent(out) :: ierr
integer :: i
integer :: mat_index
ierr = SPH_SUCCESS
do i = 1, npart
if (.not. sph_explosive_is_active_particle(i)) cycle
mat_index = material_id(i)
if (mat_index < 1 .or. mat_index > material_count) then
call sph_error_set(SPH_ERROR_INPUT, 'Explosive particle material is invalid')
ierr = SPH_ERROR_INPUT
return
end if
if (material_density(mat_index) <= 0.0_rk) then
call sph_error_set(SPH_ERROR_INPUT, 'Explosive particle density is invalid')
ierr = SPH_ERROR_INPUT
return
end if
rho(i) = material_density(mat_index)
if (mass(i) <= 0.0_rk) mass(i) = 1.0_rk
volume(i) = mass(i) / rho(i)
end do
end subroutine sph_explosive_apply_initial_conditions
subroutine sph_explosive_advance(dt, time, ierr)
real(rk), intent(in) :: dt
real(rk), intent(in) :: time
integer, intent(out) :: ierr
integer :: i
integer :: explosive_index
real(rk) :: lambda_old
real(rk) :: lambda_target
real(rk) :: delta_lambda
real(rk) :: release_mass
real(rk) :: release_energy
real(rk) :: release_momentum(SPH_NDIM)
ierr = SPH_SUCCESS
if (.not. explosive_material_seen) return
if (dt <= 0.0_rk) then
call sph_error_set(SPH_ERROR_ARGUMENT, 'Explosive time step must be positive')
ierr = SPH_ERROR_ARGUMENT
return
end if
call sph_explosive_allocate_state(ierr)
if (ierr /= SPH_SUCCESS) return
call sph_gas_clear_sources(ierr)
if (ierr /= SPH_SUCCESS) return
do i = 1, npart
if (.not. sph_explosive_is_active_particle(i)) cycle
explosive_index = sph_explosive_table_index_by_material_id(material_id(i))
if (explosive_index <= 0) then
call sph_error_set(SPH_ERROR_INPUT, 'Explosive particle material has no control')
ierr = SPH_ERROR_INPUT
return
end if
lambda_old = explosive_reaction_progress(i)
lambda_target = sph_explosive_reaction_target(i, explosive_index, time)
if (lambda_target < lambda_old) lambda_target = lambda_old
if (lambda_target > 1.0_rk) lambda_target = 1.0_rk
delta_lambda = lambda_target - lambda_old
if (delta_lambda <= 0.0_rk) cycle
release_mass = delta_lambda * mass(i)
release_energy = release_mass * explosive_energy_per_mass(explosive_index)
release_momentum = release_mass * v(:,i)
explosive_reaction_progress(i) = lambda_target
explosive_released_mass(i) = explosive_released_mass(i) + release_mass
explosive_released_energy(i) = explosive_released_energy(i) + release_energy
explosive_released_momentum(:,i) = explosive_released_momentum(:,i) + &
release_momentum
if (explosive_conversion_mode(explosive_index) == EXPLOSIVE_CONVERSION_SOURCE) then
call sph_explosive_apply_source_release(explosive_index, release_mass, &
release_momentum, release_energy, dt, ierr)
if (ierr /= SPH_SUCCESS) return
else if (lambda_target >= 1.0_rk) then
call sph_explosive_convert_particle_to_gas(i, explosive_index, ierr)
if (ierr /= SPH_SUCCESS) return
end if
end do
end subroutine sph_explosive_advance
real(rk) function sph_explosive_reaction_target(index, explosive_index, time)
integer, intent(in) :: index
integer, intent(in) :: explosive_index
real(rk), intent(in) :: time
real(rk) :: burn_window
sph_explosive_reaction_target = explosive_reaction_progress(index)
if (time < explosive_detonation_time(index)) return
burn_window = explosive_burn_time(explosive_index)
if (burn_window <= 0.0_rk) then
sph_explosive_reaction_target = 1.0_rk
else
sph_explosive_reaction_target = &
(time - explosive_detonation_time(index)) / burn_window
if (sph_explosive_reaction_target < 0.0_rk) then
sph_explosive_reaction_target = 0.0_rk
end if
if (sph_explosive_reaction_target > 1.0_rk) then
sph_explosive_reaction_target = 1.0_rk
end if
end if
end function sph_explosive_reaction_target
subroutine sph_explosive_apply_source_release(explosive_index, release_mass, &
release_momentum, release_energy, dt, ierr)
integer, intent(in) :: explosive_index
real(rk), intent(in) :: release_mass
real(rk), intent(in) :: release_momentum(SPH_NDIM)
real(rk), intent(in) :: release_energy
real(rk), intent(in) :: dt
integer, intent(out) :: ierr
integer :: product_id
integer :: target_count
integer :: i
real(rk) :: mass_rate
real(rk) :: energy_rate
real(rk) :: momentum_rate(SPH_NDIM)
ierr = SPH_SUCCESS
product_id = explosive_product_material_id(explosive_index)
target_count = sph_explosive_count_active_gas(product_id)
if (target_count <= 0) then
call sph_error_set(SPH_ERROR_INPUT, 'Explosive SOURCE conversion has no active product Gas target')
ierr = SPH_ERROR_INPUT
return
end if
mass_rate = release_mass / (dt * real(target_count, rk))
energy_rate = release_energy / (dt * real(target_count, rk))
momentum_rate = release_momentum / (dt * real(target_count, rk))
do i = 1, npart
if (.not. sph_explosive_is_active_gas_target(i, product_id)) cycle
call sph_gas_add_source_by_particle(i, mass_rate, momentum_rate, &
energy_rate, ierr)
if (ierr /= SPH_SUCCESS) return
end do
end subroutine sph_explosive_apply_source_release
subroutine sph_explosive_convert_particle_to_gas(index, explosive_index, ierr)
integer, intent(in) :: index
integer, intent(in) :: explosive_index
integer, intent(out) :: ierr
integer :: product_id
ierr = SPH_SUCCESS
product_id = explosive_product_material_id(explosive_index)
if (product_id < 1 .or. product_id > material_count) then
call sph_error_set(SPH_ERROR_INPUT, 'Explosive product material is invalid')
ierr = SPH_ERROR_INPUT
return
end if
particle_phase(index) = SPH_PHASE_GAS
material_id(index) = product_id
if (material_density(product_id) > 0.0_rk) rho(index) = material_density(product_id)
if (rho(index) > 0.0_rk) volume(index) = mass(index) / rho(index)
internal_energy(index) = explosive_energy_per_mass(explosive_index)
end subroutine sph_explosive_convert_particle_to_gas
subroutine sph_explosive_estimate_dt_limit(dt_reaction, ierr)
real(rk), intent(out) :: dt_reaction
integer, intent(out) :: ierr
integer :: i
real(rk) :: burn_window
ierr = SPH_SUCCESS
dt_reaction = 0.0_rk
if (.not. explosive_material_seen) then
explosive_dt_reaction = 0.0_rk
return
end if
do i = 1, explosive_material_count
burn_window = explosive_burn_time(i)
if (burn_window <= 0.0_rk) cycle
if (dt_reaction <= 0.0_rk .or. burn_window / 4.0_rk < dt_reaction) then
dt_reaction = burn_window / 4.0_rk
end if
end do
explosive_dt_reaction = dt_reaction
end subroutine sph_explosive_estimate_dt_limit
subroutine sph_explosive_get_detonation_time_range(time_min, time_max, ierr)
real(rk), intent(out) :: time_min
real(rk), intent(out) :: time_max
@@ -510,6 +697,30 @@ contains
end do
end function sph_explosive_has_ignition_for_material
integer function sph_explosive_count_active_gas(product_id)
integer, intent(in) :: product_id
integer :: i
sph_explosive_count_active_gas = 0
do i = 1, npart
if (sph_explosive_is_active_gas_target(i, product_id)) then
sph_explosive_count_active_gas = sph_explosive_count_active_gas + 1
end if
end do
end function sph_explosive_count_active_gas
logical function sph_explosive_is_active_gas_target(index, product_id)
integer, intent(in) :: index
integer, intent(in) :: product_id
sph_explosive_is_active_gas_target = .false.
if (index < 1 .or. index > npart) return
if (particle_phase(index) /= SPH_PHASE_GAS) return
if (particle_status(index) /= SPH_STATUS_ACTIVE) return
if (material_id(index) /= product_id) return
sph_explosive_is_active_gas_target = .true.
end function sph_explosive_is_active_gas_target
logical function sph_explosive_is_active_particle(index)
integer, intent(in) :: index
+9
View File
@@ -11,6 +11,7 @@ module sph_solver_explicit
use sph_gas, only: sph_gas_update_pressure, sph_gas_compute_density_rate, &
sph_gas_compute_acceleration, sph_gas_update_diagnostics, &
sph_gas_estimate_dt_limits, sph_gas_apply_sources_explicit
use sph_explosive, only: sph_explosive_advance, sph_explosive_estimate_dt_limit
use sph_output_csv, only: sph_output_write_step
implicit none
@@ -62,6 +63,8 @@ contains
rho(i) = rho(i) + dt * drho_dt(i)
v(:,i) = vhalf(:,i) + 0.5_rk * dt * a(:,i)
end do
call sph_explosive_advance(dt, current_time + dt, ierr)
if (ierr /= SPH_SUCCESS) return
call sph_gas_apply_sources_explicit(dt, ierr)
if (ierr /= SPH_SUCCESS) return
call sph_water_update_diagnostics(ierr)
@@ -107,6 +110,7 @@ contains
real(rk) :: gas_cfl
real(rk) :: gas_accel
real(rk) :: gas_limit
real(rk) :: explosive_limit
real(rk) :: water_limit
if (safety_factor <= 0.0_rk) then
@@ -125,6 +129,11 @@ contains
if (gas_limit > 0.0_rk) then
if (dtcrit <= 0.0_rk .or. gas_limit < dtcrit) dtcrit = gas_limit
end if
call sph_explosive_estimate_dt_limit(explosive_limit, ierr)
if (ierr /= SPH_SUCCESS) return
if (explosive_limit > 0.0_rk) then
if (dtcrit <= 0.0_rk .or. explosive_limit < dtcrit) dtcrit = explosive_limit
end if
dtcrit = dtcrit * safety_factor
end subroutine sph_solver_phase_dt
+20 -20
View File
@@ -79,26 +79,26 @@
## 阶段 D:反应进度、释放量、Gas 源项与 phase 转化
- [ ] 实现 programmed burn 反应进度目标值计算。
- [ ] 实现 `burn_time = 0` 的瞬时反应路径。
- [ ] 实现 `burn_time > 0` 的线性反应窗口路径。
- [ ] 保证 `lambda` 被限制在 `[0,1]` 范围内。
- [ ] 保证 `lambda` 单调不可逆增加。
- [ ] 计算每步 `delta_lambda` 反应增量。
- [ ] 按 `delta_lambda * mass_initial` 计算释放质量。
- [ ] 按释放质量和单位质量能量计算释放能量。
- [ ] 按释放质量和当前速度计算释放动量。
- [ ] 将释放质量累计到 Explosive 诊断状态。
- [ ] 将释放能量累计到 Explosive 诊断状态。
- [ ] 将释放动量累计到 Explosive 诊断状态。
- [ ] 实现 `CONVERSION=SOURCE` 到 Gas 源项缓存的注入路径。
- [ ] 实现 `CONVERSION=PHASE` 的完全反应后 phase 转化路径。
- [ ] 将完全反应粒子的 material 改为 product Gas material。
- [ ] 在 phase 转化后刷新 Gas 压力和 summary。
- [ ] 对无法确定目标 Gas 状态的 source 注入路径报 error。
- [ ] 将 Explosive 更新挂接到显式求解器步骤中。
- [ ] 增加反应时间步约束诊断或预留字段。
- [ ] 确认无 Explosive 输入时 Water/Gas 算例不进入 Explosive 更新路径。
- [x] 实现 programmed burn 反应进度目标值计算。
- [x] 实现 `burn_time = 0` 的瞬时反应路径。
- [x] 实现 `burn_time > 0` 的线性反应窗口路径。
- [x] 保证 `lambda` 被限制在 `[0,1]` 范围内。
- [x] 保证 `lambda` 单调不可逆增加。
- [x] 计算每步 `delta_lambda` 反应增量。
- [x] 按 `delta_lambda * mass_initial` 计算释放质量。
- [x] 按释放质量和单位质量能量计算释放能量。
- [x] 按释放质量和当前速度计算释放动量。
- [x] 将释放质量累计到 Explosive 诊断状态。
- [x] 将释放能量累计到 Explosive 诊断状态。
- [x] 将释放动量累计到 Explosive 诊断状态。
- [x] 实现 `CONVERSION=SOURCE` 到 Gas 源项缓存的注入路径。
- [x] 实现 `CONVERSION=PHASE` 的完全反应后 phase 转化路径。
- [x] 将完全反应粒子的 material 改为 product Gas material。
- [x] 在 phase 转化后刷新 Gas 压力和 summary。
- [x] 对无法确定目标 Gas 状态的 source 注入路径报 error。
- [x] 将 Explosive 更新挂接到显式求解器步骤中。
- [x] 增加反应时间步约束诊断或预留字段。
- [x] 确认无 Explosive 输入时 Water/Gas 算例不进入 Explosive 更新路径。
## 阶段 E:Summary、Output、Restart、API、C++、Python 与 CLI